Replica rifle SA-B05 brand Specna Arms – The Rifle made mostly of a single zinc and aluminum alloy, with the use of steel in the most critical points of the replica (steel are therefore all the screws, pins and handle tactical sling). Battery housing and the pistol grip is made of a polymeric plastic. The replica’s body and a set of RIS rails were subjected to anodization process, which guarantees a high degree of protection against corrosion replicas. The same painting was executed replicas of the pulverizing process, after having been subjected sandblasted surface. This provides a much higher than normal resistance to abrasion of paint applied.
The replica is very well made – similar to top class manufacturers G & P and Classic Army – and perfectly balanced. This ensures perfect maneuverability of the replica.
The quick-change system uses springs, the so-called Enter & Convert ™ system. This allows you to quickly and efficiently adapt to the conditions of the replica power expected at the game without having access to a workshop or a series of special tools – when you remove gearbox from the body of the replica, the same process of replacing the springs takes just a few seconds.
In the light of the prevailing trend across Europe for the use of legal restrictions replica muzzle velocity and the arrangements existing within the same environments, this system provides the user with considerable potential and a lot of freedom. Enter System & Convert ™ allows a minimal investment of time replace the main spring, and hence, adjust the muzzle velocity of a replica to the area of the game so as to ensure the ideal compromise between efficiency and conduct fire safety of themselves and other players.
The replica is fully adapted to work with the type of LiPo batteries and LiFe. With the initial base muzzle velocity of ~ 410 FPS guaranteed by the factory fitted spring, the replica is well suited for conducting operations on middle distance. The set includes an M90-type spring, which can reduce the initial speed to ~ 310 FPS thus making replica perfectly adapted to operate over short distances or inside buildings.
The reinforced cylinder head gearbox houses a steel spring guide which is part of the system Enter & Convert ™ and embedded 8-millimeter ball bearings and steel pads rack. A lightweight, polycarbonate plastic piston is provided with a steel tooth in order to increase its strength. It also uses a cylinder type 2 and the steel breaker, as well as metal hop-up chamber.
The replica is equipped with a dorsal RIS rail 22 mm, the team front RIS rails and adjustable flask. On the upper RIS rail there are metal flip-up sights, but they can easily be replaced by any optoelectronic targeting device. Standard flash hider uses 14-mm left-hand thread, allowing connection of a silencer.
To increase the realism, the replica is also equipped with a working lock release.
Included with the replica is also a steel magazine hi-cap, with a capacity of 300 BBs.
Additional accessories visible on the photograph are not part of the set!
The kit includes:
– Mechanical sights
– Additional spring