A gas blowback airsoft pistol from the VFC x Stark Arms collaboration, the SA226T comes with an optics-ready setup for adding a compatible sight. It suits players who want a GBB sidearm with the option to run a red dot.
The BIG Foot Heat is a 1400mAh 11.1V 25C pack with a Deans connector, sized 105mm x 20mm x 23mm. A straightforward choice for players working around a cramped battery compartment.
A battery capacity checker from BIG that gives a digital reading of how much charge is left in a pack. A useful addition to your charging routine if you want to know pack condition before a game day.
A two-tone electric M4 rifle from SAIGO, intended for Speedsoft and close-quarters games. Its Version 2 gearbox, microswitch trigger unit and straight blade trigger are aimed at players who value a short trigger pull.
The VIGOR M870 Custom Tactical is a spring-powered pump action shotgun in two-tone blue, with a full-length RIS handguard, receiver rails and an adjustable M4-style stock. It suits skirmishers wanting a rail-heavy shotgun with no gas or batteries to carry.
A black 39-round magazine for the KSC M93R Auto-9 C (Robocop) airsoft pistol. It suits owners of that model who want a magazine matching the stated round count and colour.
A HUNTSMAN waterproof 600D polyester cushion filled with synthetic beans, supplied in Olive Drab with a webbed carry loop. It gives seated airgun shooters and field marksmen a portable rest and ground barrier.
The HUNTSMAN 600D Waterproof Shooters Cushion is a camo field seat that doubles as a rifle rest, with a 600-denier waterproof polyester shell and synthetic fill that moulds to shape. It suits hunters and target shooters on damp ground.
A black field cushion from HUNTSMAN with a 600-denier waterproof polyester shell and lightweight foam bean filling. It doubles as a positional rest for rifles and suits shooters who need compact, movable seating on wet or rough ground.
A brown leather belt holster shaped to the original Webley pattern for the MKVI air pistol. Suited to collectors and airsoft players wanting a period-style carry option for a revolver of similar size.
A small WE spare for the SMG8, covering position 81 in the bolt carrier and recoil guide assembly. It suits owners servicing their own rifle or replacing a lost or worn recoil spring guide stopper or bolt screw.
The #71 loading nozzle retaining pin, also listed as the valve stopper pin, is a WE spare component for the SMG8. It suits owners carrying out their own repairs or replacing a mislaid pin during servicing.
A trigger block safety lever for E&C AEG rifles on the M4 / M16 platform with a version 2 gearbox. Suits players and technicians carrying out maintenance, repairs or a fresh build.
The WG10 1.5J loading nozzle and NPAS unit come together as a single set for WELL PRO MCX XM5 and XM7 rifles, with MWS-compatible fitment. A practical pickup for servicing or piecing together an MWS-based build.
A side-folding stock from WELL with a 1913 Picatinny attachment point, supplied in black. It suits airsoft rifles and setups that use a Picatinny interface and want a folding stock option.
A metal ambidextrous magazine release assembly for M4/AR-15 pattern airsoft rifles, listed in black under CYMA part number F376. Suits players replacing a worn catch or technicians building up a receiver.
A servicing kit for APS Real Action Marker platforms, supplied with disassembly keys, valve tools and maintenance hardware in hardened carbon tool steel with composite handles. The factory manual and diagrams suit armourers, trade workshops and rental operators maintaining markers.
APS packs twelve reusable .50 calibre rubber balls for RAM markers and CO2 training pistols. Solid-core and non-marking, they are aimed at zeroing drills, target practice and range sessions.
A replacement internal gas seal for APS Striker series platforms, produced to factory geometry. Suited to workshop technicians and repair armouries renewing a worn gasket or chasing a leak.
A multi-pack of replacement O-rings for the APS 88g CO2 Smart Charger, produced in industrial NBR. It is aimed at workshop repairs, rental fleet upkeep and retail parts stock for APS CAM870 charging systems.
A 60° firm hop-up bucking from LAYLAX for standard Marui-spec AEG chambers and barrels, with extended sealing lips and a single-mound contact patch. Suited to mid-to-high velocity builds running mid-weight or heavy BBs.
Replacement buffer tube retaining ring in machined carbon steel from LAYLAX, made for Tokyo Marui Next Gen Recoil Shock M4 and AR-15 builds. Fits standard castle nut wrenches, so it suits anyone rebuilding a recoil-shock lower.
A thread adapter from LAYLAX that lets Tokyo Marui Mk23 owners fit 14mm CCW accessories. Suits skirmishers wanting to add a suppressor, barrel extension or tracer unit to the pistol.
The LAYLAX Anti-Wobble Frame Lock Pin is an expanding front pin for TM-spec M4 and AR-15 metal receivers, tightened by hex key. It suits players wanting a rigid frame and steadier optic mounting.
A replacement mainspring from LAYLAX for Tokyo Marui NGRS rifles, using variable-pitch coil spacing and oil-tempered steel wire. It suits players wanting consistent velocity with reduced load on the motor and gears.
This LAYLAX steel plate replaces the standard buffer tube collar fit on Tokyo Marui NGRS M4 rifles and adds an ambidextrous loop for clip and hook slings. It suits players setting up single-point or multi-point carry on an NGRS build.
A reinforced piston from LAYLAX for Tokyo Marui NGRS New Version 2 gearboxes, pairing a polymer body with heat-treated steel rack teeth. It suits players servicing recoil-shock M4 or HK416 builds who need a drop-in piston for stressed setups.
A LAYLAX conversion lead that lets a Tokyo Marui EVOLT M4A1 run on Deans / T-Plug LiPo packs of 7.4V or 11.1V. Suits players and workshops wanting to use their existing battery collection with an EVOLT platform.
A replacement compression nozzle for Tokyo Marui NGRS M4 and HK416 rifles, made by LAYLAX in POM with an internal O-ring. It is aimed at players servicing an original cylinder head or completing an upgraded NGRS build.
The LAYLAX pin retention kit is made for Tokyo Marui HK416D NGRS rifles, holding the trigger group with machined aluminium links and steel pins. It suits those wanting a drop-in reinforcement part supplied with fixing screws and hex fasteners.
A three-gear transmission set for Tokyo Marui NGRS gearboxes, supplied by LAYLAX as sector, spur and bevel components. It suits upgraded Recoil Shock builds that run heavier springs and need a 20:1 torque ratio with CNC-machined steel construction.
LAYLAX replacement magazine gas router for Tokyo Marui Glock GBB pistols, moulded in cold-resistant rubber with a concave flow channel. A straightforward fit for players servicing their magazines.
A motorised magazine filler from LAYLAX, the Satellite Electric BB Loader NEO holds around 1,300 BBs and feeds AEG, gas blowback and sniper magazines. Aimed at players and technicians who fill many magazines in one session.
A 14mm CCW muzzle adaptor for WINGUN gas and CO2 pistols, moulded in ABS polymer. It lets you mount suppressors, tracer units and mock flash hiders on muzzles without an external thread.
This LANCER mini reflex optic clamps to 20mm Picatinny rails and sits low on pistols and compact rifles. Suited to players assembling a lightweight CQB loadout.
A five-way balance board from ACM links several lithium packs to one charger, covering 2S 7.4V and 3S 11.1V batteries. It suits airsoft players and field technicians preparing multiple LiPo, Li-ion or LiFe packs before a game.
A DELTA belt-mounted paddle adaptor for airsoft holsters, with a 360-degree turning plate and toothed lock to hold the chosen angle. It suits players who want a different draw angle without stripping down their belt kit.
The DELTA two-point sling holds a rifle across the shoulder and chest using nylon webbing and polymer hooks. A pull loop lets the length be altered while it is worn, suiting airsoft players who move between carrying and shooting.
The TOKYO optic base for EU Series gas blowback pistols holds a micro red dot above the slide without adding weight to it. Suits players building a competition or target sidearm who want blowback cycling left unaffected.
The Kobra EKP-1S-03 from JJ is a replica collimator sight that clamps to an AK side rail with a quick-detach lever. Selectable reticle patterns, adjustable brightness and a wide window suit close-range skirmishing.
A compact airsoft sight from JJ for pistols and small carbines, using a red dot reticle with brightness control. It fixes to 20mm Picatinny or Weaver rails and includes elevation and windage adjustment.
The ACTION hop adjustment wheel is a polymer rotary dial that regulates bucking tension on the AAP-01 and AAP-01C. A useful spare for players and technicians servicing these gas blowback pistols.
This cast metal alloy trigger is a direct-fit spare for the MAXTACT Derringer gas non-blowback pistol, supplied in polished silver plating. Suited to workshops and players replacing a worn fire control part.
A replacement fire control part for the MAXTACT Derringer double-barrel gas NBB pistol. Cast in high-density metal alloy with a matte black finish, it suits armourers and owners handling repairs.
Gold-plated trigger unit for the MAXTACT Derringer NBB gas pistol, made to factory specification in cast metal alloy. A drop-in spare for technicians and repair shops servicing single-action examples of the platform.
This LANCER suppressor houses the E-Shooter Smoky BT Tracer module, flashing LEDs as 6mm tracer BBs pass through and lighting the BB path. Bluetooth app control covers RGB colours, rate of fire and diagnostics.
Built for M4 and AR-15 AEGs, the CASTELLAN Ultimate Polymer Dust Cover is a black Capsule-style port cover with a spring and locking detent. It suits builders replacing a steel cover on Tokyo Marui spec Version 2 receivers.
A 0.8-litre aluminium reservoir for 3000 PSI airsoft HPA setups, supplied in the standard bottle profile. Suited to players building an HPA rig and to rental fleets keeping spares, the ACM tank has an impact-resistant alloy shell.
A moisture-wicking Mesh-Tech baselayer shirt from VIPER with flatlock seams and an athletic cut. Suited to hot-weather skirmishes, training and wear under a plate carrier or chest rig.
A compact fabric sleeve from VIPER for the VX system, storing a secondary airsoft handgun on hook-and-loop panels. It suits players carrying semi-automatic sidearms in backpacks, chest rigs or range bags, with a stretchy strap to keep the pistol secure.
EMG builds this muzzle device around a licensed Strike Industries linear compensator, with tracer illumination and a simulated flame effect in one unit. It suits players wanting a low-profile front end with selectable output modes.
The EMG linear compensator muzzle device has tracer electronics built in, switching between tracer light, a simulated muzzle flash, or both. It suits players wanting tracer effects and a tidy front end without a separate unit.
This G&G piston is designed for the L85 and belongs to the SNC reinforced series. It suits airsoft users carrying out repair or build work who need that specific component.
A six-shell speedloader for airsoft revolvers from ARES, moulded in lightweight high-impact polymer with a plunger release that seats all six shells at once. A useful addition for skirmish players and rental sites running revolver loadouts.
The ACM 7.4V 1300mAh LiPo pack is a compact lithium-polymer battery for AEGs with tight compartments. Its 30C continuous and 60C burst rating suits compact builds and custom projects.
For the Tokyo Marui M4A1 MWS gas blowback rifle, the LAYLAX floating valve uses an enlarged inlet and O-ring sealing. It suits players tuning gas flow, velocity consistency and blowback response.
A replacement internal seal from LAYLAX First Factory for Tokyo Marui M4A1 MWS gas blowback magazines. It fits at the outlet where propellant leaves the magazine on its way towards the bolt.
A hard-grade hop-up bucking from LAYLAX for Tokyo Marui-spec gas blowback pistols and VSR-10 rifles. Suited to upgraded, high-power builds that need a stable contact patch and a consistent chamber seal.
A spare microphone arm for EARMOR M32 PLUS, M32H PLUS and S31 headsets, with a flexible gooseneck and multi-pin connector. It suits airsoft players and kit managers repairing a headset’s voice link.
The DUEL 11.1v 1450mAh LiPo is a three-cell pack with a 25C continuous discharge rating, aimed at upgraded AEGs that need stronger current delivery. It has a T-Dean connector and low-resistance wiring in a compact shape for tight compartments.
This slim 9.6v pack from DUEL uses Ni-MH cells and carries a 1600mAh capacity, with a Mini Tamiya connector for AEG wiring. It suits players who need a narrow stick battery for a stock tube, handguard or confined receiver space.
The CYMA 7mm Gearbox Bushings set contains six steel alloy parts for AEG gearboxes that accept 7mm bushings. It suits technicians servicing upgraded, high-velocity or high-ROF builds.
A&K open steel bushings with an 8mm outer diameter and 3mm inner diameter, sized for AEG gearbox shells. A workshop part for technicians building high-stress setups with heavy springs.
A genuine KWC internal metal replacement part for gas airsoft and airgun platforms. Aimed at workshop technicians, armourers and retailers who need factory-compatible selector hardware for repairs.
The S005 mock suppressor from SALVO gives Flat Dark Earth and two-tone rifles a finished muzzle look. Built in CNC-machined aluminium with a matte Tan anodised coating, it fits compatible modular handguards and takes longer inner barrels.
A Tan-finished DOUBLE mock silencer for Double Eagle platforms, fitted with an internal UV LED tracer to light green tracer BBs. It suits night-game players and earth-tone builds.
The DOUBLE G101SD is a mock suppressor with an internal tracer module for green tracer BBs. It suits players wanting low-light projectile visibility and a USB-rechargeable muzzle accessory.
A non-tracer barrel shroud in Tan for DOUBLE G101SD builds, machined from aluminium alloy with a matte anodised finish. It is aimed at airsoft players and armourers dressing Double Eagle tactical rifles or fitting extended inner barrels.
A V2 magazine-well mounting stand from HUNTSMAN that keeps handguns upright for showcases, retail shelves and workshop benches. It suits collectors and airsoft users who want an orderly way to present or maintain their pistols.
The V1 handgun base from HUNTSMAN holds an airsoft pistol upright on its magazine well for display or bench work. A sensible pick for players, collectors and shops wanting tidy, scratch-free storage.
A HUNTSMAN mock suppressor for airsoft pistols and compact rifles, made to screw onto standard muzzle threads. It suits players who want to run a longer inner barrel while keeping front-end weight low.
A replacement loading nozzle from HUNTSMAN for compatible pistol-series gas blowback handguns. It suits players and technicians carrying out routine servicing or replacing a damaged nozzle.
34 users are watching this item:
Amomax Paddle Holster for WE17 / TM17 / KJW17
Henry Collins from Manchester purchased
Webley MKVI Leather Holster
11 minutes ago
Jack Downing says:
Absolutely incredible customer service from these. Dave was wonderful and was very quick to resolve a minor issue I had with my online order. Delivery was also swift and the products are well packaged so there’s no worries about anything arriving damaged. Super chuffed with what I’ve received from Defcon.