-

-

We – Parts – WE SMG8 #81 – Bolt Carrier / Recoil Guide Assembly Component (Recoil Spring Guide Stopper / Bolt Screw)
£15.60In stock
A small WE spare for the SMG8, covering position 81 in the bolt carrier and recoil guide assembly. It suits owners servicing their own rifle or replacing a lost or worn recoil spring guide stopper or bolt screw.
-

We – Parts – WE SMG8 #71 – Loading Nozzle Retaining Pin / Valve Stopper Pin
£7.80In stock
The #71 loading nozzle retaining pin, also listed as the valve stopper pin, is a WE spare component for the SMG8. It suits owners carrying out their own repairs or replacing a mislaid pin during servicing.
-

E&C AEG v2 Trigger Block Safety Lever for M4 / M16
£3.99In stock
A trigger block safety lever for E&C AEG rifles on the M4 / M16 platform with a version 2 gearbox. Suits players and technicians carrying out maintenance, repairs or a fresh build.
-

Well PRO MCX XM5/XM7 Loading Nozzle & NPAS Set (MWS Compatible – WG10 1.5J nozzle)
£24.99In stock
The WG10 1.5J loading nozzle and NPAS unit come together as a single set for WELL PRO MCX XM5 and XM7 rifles, with MWS-compatible fitment. A practical pickup for servicing or piecing together an MWS-based build.
-

LayLax Prometheus 60° Air Seal Hop Bucking
£6.99In stock
A 60° firm hop-up bucking from LAYLAX for standard Marui-spec AEG chambers and barrels, with extended sealing lips and a single-mound contact patch. Suited to mid-to-high velocity builds running mid-weight or heavy BBs.
-

LayLax Anti-Wobble Frame Lock Pin M4 Metal
£12.99In stock
The LAYLAX Anti-Wobble Frame Lock Pin is an expanding front pin for TM-spec M4 and AR-15 metal receivers, tightened by hex key. It suits players wanting a rigid frame and steadier optic mounting.
-

LayLax Prometheus MS80 Spring TM NGRS Series
£5.99In stock
A replacement mainspring from LAYLAX for Tokyo Marui NGRS rifles, using variable-pitch coil spacing and oil-tempered steel wire. It suits players wanting consistent velocity with reduced load on the motor and gears.
-

LayLax Prometheus Hard Piston TM NGRS Ver.2
£29.99In stock
A reinforced piston from LAYLAX for Tokyo Marui NGRS New Version 2 gearboxes, pairing a polymer body with heat-treated steel rack teeth. It suits players servicing recoil-shock M4 or HK416 builds who need a drop-in piston for stressed setups.
-

LayLax Prometheus NEO Nozzle TM NGRS M4/416
£27.99In stock
A replacement compression nozzle for Tokyo Marui NGRS M4 and HK416 rifles, made by LAYLAX in POM with an internal O-ring. It is aimed at players servicing an original cylinder head or completing an upgraded NGRS build.
-

LayLax Anti-Rotation Pin TM HK416D NGRS
£4.99In stock
The LAYLAX pin retention kit is made for Tokyo Marui HK416D NGRS rifles, holding the trigger group with machined aluminium links and steel pins. It suits those wanting a drop-in reinforcement part supplied with fixing screws and hex fasteners.
-

LayLax Prometheus EG 20:1 Gear Set TM NGRS
£49.99In stock
A three-gear transmission set for Tokyo Marui NGRS gearboxes, supplied by LAYLAX as sector, spur and bevel components. It suits upgraded Recoil Shock builds that run heavier springs and need a 20:1 torque ratio with CNC-machined steel construction.
-

Wingun ABS Pistol Thread Adapter 14mm CCW
£1.99In stock
A 14mm CCW muzzle adaptor for WINGUN gas and CO2 pistols, moulded in ABS polymer. It lets you mount suppressors, tracer units and mock flash hiders on muzzles without an external thread.
-

Action Army AAP Series Hop Adjustment Wheel Gas
£8.99In stock
The ACTION hop adjustment wheel is a polymer rotary dial that regulates bucking tension on the AAP-01 and AAP-01C. A useful spare for players and technicians servicing these gas blowback pistols.
-

Maxtact Derringer Gas Pistol Silver Replacement Trigger
£14.99In stock
This cast metal alloy trigger is a direct-fit spare for the MAXTACT Derringer gas non-blowback pistol, supplied in polished silver plating. Suited to workshops and players replacing a worn fire control part.
-

Maxtact Derringer Gas Pistol Black Replacement Trigger
£14.99In stock
A replacement fire control part for the MAXTACT Derringer double-barrel gas NBB pistol. Cast in high-density metal alloy with a matte black finish, it suits armourers and owners handling repairs.
-

Maxtact Derringer Gas Pistol Gold Replacement Trigger
£14.99In stock
Gold-plated trigger unit for the MAXTACT Derringer NBB gas pistol, made to factory specification in cast metal alloy. A drop-in spare for technicians and repair shops servicing single-action examples of the platform.
-

G&G SNC REINFORCED PISTON FOR L85
£32.99In stock
This G&G piston is designed for the L85 and belongs to the SNC reinforced series. It suits airsoft users carrying out repair or build work who need that specific component.
-

Laylax First Factory High Bullet Floating Valve for Tokyo Marui M4A1 MWS GBB
£18.99In stock
For the Tokyo Marui M4A1 MWS gas blowback rifle, the LAYLAX floating valve uses an enlarged inlet and O-ring sealing. It suits players tuning gas flow, velocity consistency and blowback response.
-

Laylax First Factory Gas Route Seal Gasket for Tokyo Marui M4A1 MWS GBB Magazines
£8.99In stock
A replacement internal seal from LAYLAX First Factory for Tokyo Marui M4A1 MWS gas blowback magazines. It fits at the outlet where propellant leaves the magazine on its way towards the bolt.
-

Laylax Nine Ball Wide Use Air Seal Hop-Up Bucking for TM GBB & VSR-10 (Hard – Red)
£11.99In stock
A hard-grade hop-up bucking from LAYLAX for Tokyo Marui-spec gas blowback pistols and VSR-10 rifles. Suited to upgraded, high-power builds that need a stable contact patch and a consistent chamber seal.
-

CYMA 7mm Gearbox Bushings High-Strength Upgrade Set (6 Pieces)
£5.99In stock
The CYMA 7mm Gearbox Bushings set contains six steel alloy parts for AEG gearboxes that accept 7mm bushings. It suits technicians servicing upgraded, high-velocity or high-ROF builds.
-

A&K High-Strength Open Steel Bearings Bushings (8mm OD x 3mm ID)
£3.99In stock
A&K open steel bushings with an 8mm outer diameter and 3mm inner diameter, sized for AEG gearbox shells. A workshop part for technicians building high-stress setups with heavy springs.
-

KWC Spare Parts KCCB818 #Z32-S Replacement Internal Metal Component
£5.99In stock
A genuine KWC internal metal replacement part for gas airsoft and airgun platforms. Aimed at workshop technicians, armourers and retailers who need factory-compatible selector hardware for repairs.
-

Huntsman Pistol Series Plastic Nozzle 14mm Replacement
£2.99In stock
A replacement loading nozzle from HUNTSMAN for compatible pistol-series gas blowback handguns. It suits players and technicians carrying out routine servicing or replacing a damaged nozzle.
-

Huntsman Pistol Series Plastic Nozzle 12mm Replacement
£2.99In stock
A 12mm loading nozzle in impact-resistant polymer for HUNTSMAN Pistol Series gas blowback pistols. Suits players carrying out routine maintenance, building a pistol or replacing a worn nozzle before a game.
-

Ares M45 Replacement Gearbox Casing Set (GB-505 & GB-506)
£29.99In stock
A two-part gearbox shell set for the ARES M45 AEG platform, made up of GB-505 and GB-506. Aimed at technicians carrying out repair or rebuild work on the M45 gearbox.
-

Ares 6.03mm x 430mm Precision Tight-Bore Inner Barrel (IB-CU6.03×430)
£34.99In stock
This 430mm tight-bore barrel from ARES uses a 6.03mm bore and a polished copper/brass alloy core to keep air pressure consistent behind each BB. Suited to VSR-10, Amoeba Striker and long-barrel AEG builds.
-

Classic Army Mini Gun Shroud
£89.00In stock
The Mini Gun Shroud from CLASSIC is an external component for the front end of a mini gun build. It suits players repairing or altering an existing project.
-

Well PRO WG10 CO2 Magazine Seal O-Ring Rebuild Kit
£7.99In stock
Replacement O-rings for WELL PRO WG10 CO2 gas blowback magazines, covering the inner and outer seating rings at the capsule inlet and rear outlet valves. Aimed at owners servicing their own magazines on this platform.
-

Well PRO WG10 Gas Magazine Seal O-Ring Rebuild Kit (Green/White Silicone)
£7.99In stock
A silicone seal set for WELL PRO WG10 gas magazines, with green and white O-rings for the inlet and outlet valves. It is aimed at airsoft technicians who need to service a leaking magazine or refresh worn seals.
-

Well PRO WG10 CO2 Magazine Inlet & Outlet Valve Complete Set
£16.99In stock
A pair of replacement CO2 magazine valves for gas blowback setups, covering the inlet puncture assembly and the output release side. Suits those rebuilding WELL PRO WG10 magazines or MWS-pattern CO2 mags that leak or cycle poorly.
-

Well PRO MCX Rattler/Spear Loading Nozzle & NPAS Set (WG10)
£39.99In stock
Housed in a reinforced polymer body, this gas blowback nozzle assembly lets you set muzzle velocity with an adjustment tool. It fits Well PRO XM5/XM7 and Rattler rifles plus Tokyo Marui MWS ZET platforms.
-

ACM Micro Deans type connectors pair – Female
£0.47In stock
ACM Micro Deans type connectors, supplied as a matching pair of females for battery and power wiring. Suitable for airsofters who build, repair or rewire their own battery packs and leads.
-

ACM Micro Deans type connectors pair – Male
£0.47In stock
A pair of male Micro Deans type connectors from ACM for battery and charger wiring jobs. A practical choice if you maintain your own packs and leads and want this connector pattern on the bench.
-

Spirit Field 26ci 3000 PSI HPA Cylinder V3 Regulator
£49.99In stock
The SPIRIT 26ci 3000 PSI HPA reservoir has a factory-fitted V3 regulator and suits airsoft replicas, support weapons and remote-line builds. Its aluminium body, dual burst disks and gauge dial support field use.
-

CYMA x SP System Output Release Valve Tokyo Marui Hi Capa…
£9.99In stock
A gas blowback magazine valve from CYMA and SP System, made for Tokyo Marui Hi-Capa pistols and MWS rifles. Suited to technicians and players servicing magazines who want consistent gas output and reliable cycling.
-

GE 110mm 14CCW Barrel Extension Silencer Suppressor MC 158
£14.99In stock
A GE 110mm mock suppressor with a 14mm CCW female thread, built from aluminium alloy with an anodised matte finish. It suits airsoft users who want to extend a barrel profile or cover a longer inner barrel.
-

Golden Eagle Spare Parts MC 20 O Ring Seal
£3.99In stock
A replacement O-ring seal for GOLDEN MC-20 series gas blowback magazines, supplied as a genuine factory spare. Suits players and site technicians rebuilding magazines that have lost gas pressure.
-

Golden Eagle Spare Parts MX 5 Factory Component
£3.99In stock
A factory-pattern OEM replacement for the MX-5 platform, supplied as a GOLDEN mechanical component or assembly. It suits airsoft technicians, armourers and rental fleet maintainers carrying out internal repairs or reinforcement.
-

Golden Eagle Spare Parts MX 4 Gas Magazine
£3.99In stock
An OEM gas magazine for the MX-4 blowback submachine gun, supplied as a spare for GOLDEN owners. Suited to players and armourers who want extra magazines built around a metal alloy shell and green gas operation.
-

Stratos X x Golden Eagle MX-6-1.5J Nozzle Spare Part
£17.99In stock
A replacement gas blowback loading nozzle from STRATOS, made with Golden Eagle and set to roughly 1.5 joules. Suits players and technicians maintaining gas blowback replicas at that energy level.
-

Stratos X x Golden Eagle MX-6-1J Nozzle Spare Part
£15.99In stock
The STRATOS MX-6-1J is a drop-in replacement loading nozzle for gas blowback replicas, supplied with a pre-fitted rocket valve and polyurethane seals. It suits site operators, rental fleets and workshop technicians working to a 1 Joule limit.
-

Stratos X x Golden Eagle MX-3 Valve Spare Part
£5.99In stock
A replacement pneumatic valve assembly for compatible gas blowback systems, made by STRATOS with Golden Eagle. A sensible pick for workshops and service facilities rebuilding or maintaining guns where the original valve has worn.
-

Stratos X x Golden Eagle MX-2 Valve Spare Part
£3.99In stock
An internal replacement valve for compatible Stratos X and Golden Eagle gas systems from STRATOS. Suitable for gas blowback platforms, it uses a metal alloy and brass build with polyurethane sealing rings for workshop and hire fleet use.
-

SRC Full Chamber Part Set Replacement Spare Parts Kit
£39.99In stock
A factory-assembled internal pneumatic kit from SRC that covers the chamber housing, knocker valve, puncture seals, springs and clips in one module. Suited to technicians servicing CO2 platforms and rebuilding worn gas blocks.
-

SRC CO2 Chamber Knocker Valve Spare Part T1-20
£39.99In stock
An internal knocker valve for SRC CO2 chamber assemblies, supplied as part number T1-20. A practical spare for technicians servicing CO2 platforms and keeping rental fleet guns running.
-

SRC Titan Revolver Replacement Cylinder Spare Part T1-5(B)
£19.99In stock
A replacement indexing cylinder for the SRC Titan CO2 revolver, supplied as part T1-5(B). It is aimed at airsoft technicians and rental sites maintaining Titan revolvers.
-

APS Air Sealing Plate Pack of 50pcs
£7.99In stock
Replacement sealing plates for APS Thunder series CO2 sound distraction grenades, supplied in a pack of 50. A practical bulk option for sites and frequent players who need to keep grenades sealed and running.
-

VFC MK25 Loading Nozzle Assembly Spare Part VGCJPIS000/01-06
£14.99In stock
This VFC MK25 loading nozzle assembly is a drop-in internal replacement for the MK25 gas blowback series. It suits airsoft technicians and pro-shop repair staff servicing GBB replicas.
-

WE Hi Cappa Silencer (WE Series – 9mmCW Thread ) with Inner Barrel
£29.90In stock
A 15cm threaded silencer for WE Series pistols that carries its own inner barrel inside the body. It also suits Armour Works and Army Hi-Cappa builds on a 9mm CW thread.
-

Universal Pistol Conversion Kit with Adjustable Stock – Black
£149.99In stock
The UNIVERSAL conversion kit turns a compatible pistol into a shouldered carbine, with adjustable stock and ambidextrous charging handle. It suits shooters wanting a steadier, carbine-style setup from a pistol they already own.
-

Salvo Precision Steel Cylinder (MWS – G104 Series)
£84.99In stock
A steel cylinder from the SALVO Precision range, listed for the MWS platform and G104 series. It arrives without a spring or rod, so it suits someone rebuilding or servicing who already has those parts to hand.
-

Salvo Precision Cylinder (MWS – G104 Series)
£34.99In stock
Supplied as the cylinder alone, this SALVO internal part fits the MWS G104 series and arrives without a spring or rod. It suits players servicing that assembly who already hold those parts or will source them separately.
-

Double Eagle MWS Series Outer Barrel
£34.99In stock
The MWS Series Outer Barrel from DOUBLE is a single replacement external part for rifles in that range. It suits owners replacing a worn original barrel or finishing a build on the MWS platform.
-

Double Eagle MWS Series Inner Barrel Precision Upgrade
£14.99In stock
A DOUBLE brass inner barrel for MWS-pattern gas blowback rifles, featuring a micro-polished bore. A straightforward accuracy part for players refining a build or technicians servicing hop-up units.
-

EMG Helios x Noveske x Double Eagle M4/N4 MWS Series (G101 Magazine Feed Lips)
£3.99In stock
These G101 magazine feed lips are the replacement top section that keeps BBs held in the magazine and feeding into the hop unit. A sensible spare for EMG Helios, Noveske and Double Eagle M4/N4 MWS owners.
-

Ares 308 Series Sear – UB-194
£11.99In stock
A single replacement sear for the ARES 308 Series, listed under part number UB-194. A useful spare to keep on the bench if you service your own trigger mechanism.
-

Ares HPA Engine (HEB-001) – Part – Nozzle
£24.99In stock
A nozzle part for the ARES HPA Engine (HEB-001), sold as a single internal component. It is aimed at people maintaining or repairing an existing HEB-001 engine.
-

Ares 308 Series Hop-Up
£8.99In stock
An internal hop-up assembly for rifles in the ARES 308 line-up, supplied as a replacement for the factory-fitted part. A sensible choice when rebuilding a 308 Series replica or dealing with a worn original.
-

APS Spare Parts – CAM035 – Reinforced Push Pin
£16.99In stock
An APS internal spare part carrying the CAM035 reference, supplied as a reinforced push pin for renewing the original in an airsoft replica. A practical pick for a repair or rebuild where the existing pin needs replacing.
-

Double Bell Magazine AM45 Vorpal Bunny Base Plate (Pink – 796-1-JD)
£2.99In stock
Pink base plate for the AM45 Vorpal Bunny magazine, listed by DOUBLE under the 796-1-JD code. A suitable part for owners who need this specific magazine base plate.
-

Ares – Spare Part – AR308 Buttstock Cover
£16.99In stock
A replacement external cover for the AR308 buttstock, catalogued by ARES as a spare part. Suitable for airsoft skirmishers and gun technicians who are servicing an AR308 and require the cover piece alone.
-

Ares – Spare Part – AR-308 GB-2 Hop Rubber
£16.99In stock
A replacement hop rubber from the ARES spare parts range, listed for the AR-308 GB-2. A sensible item to hold if you maintain your own rifle and want to refresh the hop component during a rebuild.
-

Ares – Spare Part – AR-308 inner barrel
£32.99In stock
A replacement inner barrel supplied by ARES for the AR-308, categorised as an internal part. It is intended for players who service their own rifles and need to replace this component within the barrel assembly.
-

Snow Wolf SW-027 SVD Hop-up Set Assembly
£4.99In stock
Replacement hop unit for the SNOW SW-027 SVD, supplied as a built-up assembly with adjustment arm, clips and O-rings. Suits players rebuilding a worn rifle or refreshing the hop on an existing SVD build.
-

Snow Wolf SW-027 SVD Replacement Handguard
£4.99In stock
A split-style front handguard for the SNOW SW-027 SVD series, moulded in polymer composite and shaped to fit the factory retainer cap and receiver block. It suits owners replacing the original forend on compatible rifles.
-

Snow Wolf SW-027 SVD Complete Trigger Set
£19.99In stock
Replacement trigger assembly for the SNOW SW-027 SVD sniper rifle series, supplied as a complete unit with sears, springs, trigger shoe and housing. A practical option for technicians repairing or servicing SW-027 rifles.
-

Snow Wolf SW-021 MP18 Gearbox Set
£89.99In stock
Drop-in gearbox assembly for the SNOW SW-021 MP18, supplied with steel gears, a piston assembly, low-resistance wiring and a motor interface already installed. Aimed at airsoft technicians and repair centres undertaking a rebuild or internal repair.
-

Snow Wolf SW-11 Replacement Wire Component
£12.99In stock
This SNOW internal wiring assembly suits SW-11 series repairs in a workshop setting, replacing damaged loom and terminal parts with factory routing. Technicians wanting a straight swap without cutting or soldering will find it matches the original layout.
-

Snow Wolf PPSh-41 AEG Zinc Alloy Gearbox Shell Set
£24.99In stock
A zinc alloy split housing for the SNOW PPSh-41 AEG, comprising two side plates and the matching structural screws. It is aimed at workshops and players who need to replace a cracked shell or assemble a vintage-style replica.
-

Snow Wolf PPSh-41 AEG Wire Fuse Assembly
£4.99In stock
This inline fuse loom replaces the wiring on a SNOW PPSh-41 AEG, combining copper conductors with an integrated fuse to protect the motor, gearbox and battery. A practical spare for players and workshop technicians servicing the platform.
-

Snow Wolf SW-06 M3A1 Grease Gun Gearbox
£49.99In stock
A complete replacement gearbox built for the Snow Wolf M3A1 (SW-06) AEG. It arrives assembled and pre-lubricated, and suits technicians repairing or rebuilding a worn M3A1.
Upgrades & Parts
Internal upgrade parts are the key to making your airsoft weapons the best there is. Most Airsoft guns can be upgraded and we stock a wide variety of upgrade parts including springs, pistons, cylinders, nozzles, barrels, receivers and other internal & external parts.


