-

£15.99In stock
An internal tune-up spring from GUARDER, rated SP130 and intended for Tokyo Marui electric rifles. Suits players and technicians rebuilding a gearbox who already know which rating their build needs.
-

£8.99In stock
A replacement spring from GUARDER, catalogued as an internal part and marked with the SP70 designation. Suited to airsofters and technicians who carry out their own work inside the replica.
-

£16.49In stock
An oil temper wire spring from GUARDER, marked M180 and catalogued as model M-180 within the APS Series. Suited to airsofters building or servicing a gearbox who need to match a spring rating to their existing setup.
-

£28.48In stock
This GUARDER item is a replacement switch assembly intended for AK-47 builds and ordered using the GE-07-29 reference. It suits hobbyists and technicians who already strip and service their own gearboxes.
-

£28.48In stock
A trigger switch assembly made by GUARDER for the AK-47S, listed as GE-07-28. It suits players repairing an AK-pattern AEG or technicians building one up from internal components.
-

£28.48In stock
A switch assembly for the handguard, produced by GUARDER under part number GE-07-20. Suits players and technicians who need to swap out this component while keeping the rest of their handguard setup in place.
-

£8.19In stock
A polycarbonate tappet plate from GUARDER, made for Version 3 gearboxes in the Tokyo Marui style and marked with the code GE-06-03. Suits technicians refreshing the internals of a Version 3 build.
-

£10.49In stock
A polycarbonate tappet from GUARDER, made for the TM Version 2 gearbox and identified by part number GE-06-02. It suits airsoft technicians servicing or rebuilding a compatible Version 2 gearbox who need this internal replacement part.
-

£10.99In stock
GUARDER steel bushings for gearbox internals, supplied six to a bag under code GE-05-01. Aimed at technicians refreshing a build or keeping spares at the bench.
-

£13.69In stock
An internal gearbox piston from GUARDER, moulded in polycarbonate and supplied in the Economic Version. It is intended for the TM AEG series and carries the part reference GE-04-05 for identification.
-

£19.98In stock
A polycarbonate piston from GUARDER, catalogued for Tokyo Marui AEG series gearboxes and identified by part reference GE-04-04. It suits players and technicians replacing a worn component during a gearbox rebuild.
-

£50.99In stock
A steel high speed gear set for TM AEG version II and III gearboxes, supplied as GUARDER part GE-02-06. Aimed at experienced technicians carrying out an internal gearbox rebuild.
-

£41.49In stock
Replacement gearing for version II and III Tokyo Marui AEG gearboxes, sold under the GUARDER Infinite Torque-Up banner as part GE-02-05. A sensible pick for a gearbox refresh or repair where a named part is preferred.
-

£33.98In stock
A gear set in steel, catalogued by GUARDER as GE-02-01 and intended for TM AEG II/III builds of the Original Type. It suits airsoft technicians servicing a gun that takes this configuration.
-

£18.99In stock
An internal tune-up spring from GUARDER for TokyoMarui AEG gearboxes, with the PSG-1 excluded. It is suited to airsoft technicians and players carrying out their own spring changes or servicing work.
-

£19.99In stock
A GUARDER SP160 tune-up spring for TokyoMarui A.E.G. builds, supplied as a 14 g internal component. It suits airsoft technicians servicing compatible AEGs but is not intended for the PSG-1.
-

£15.99In stock
Replacement AEG main spring from GUARDER, made from oil quenched and tempered silicon-chrome alloy steel wire and listed at 14 g. Suits Tokyo Marui electric rifles, but not the PSG-1.
-

£12.99In stock
GUARDER produces this SP100 tune-up spring for Tokyo Marui electric guns, using Si-Cr alloy steel wire. It suits technicians servicing compatible AEGs; the PSG-1 is excluded.
-

£8.19In stock
A GUARDER replacement selector plate for Tokyo Marui G3 AEG rifles, made from copper and anti-heat plastic and rated to 200 degrees Celsius internally. A service part for anyone refurbishing a G3 gearbox.
-

£22.98In stock
A stainless steel cylinder head from GUARDER, manufactured to Tokyo Marui’s original specification. It suits Version 7 gearboxes such as the Marui M14 and is aimed at players replacing internal components.
-

£22.98In stock
A version 6 gearbox cylinder head from GUARDER, produced in S303 stainless steel and built to the original Tokyo Marui specification. It suits airsoft technicians working on version 6 gearbox rebuilds or repairs.
-

£22.98In stock
For Tokyo Marui-pattern AEGs with a version 3 gearbox, this cylinder head from GUARDER is produced in S303 stainless steel. It weighs 34g, and the AUG is excluded from the stated fitment.
-

£22.98In stock
A GUARDER S303 stainless steel cylinder head is intended for Version 2 AEG gearboxes built to Tokyo Marui original specification. It suits airsoft technicians replacing this internal component in a compatible gearbox, and the listed weight is 34 g.
-

£17.19In stock
The GUARDER GE-04-03 is a 12 g polycarbonate piston head with a ventilated face and a bearing. It suits technicians and experienced players working on AEG gearbox internals.
-

£13.69In stock
A replacement air cylinder for Marui MP5K and PDW series replicas, supplied as GUARDER part GE-03-04. It suits players and technicians who are servicing the internal air system and need to renew this component.
-

£38.99In stock
A short-axis motor from GUARDER for MARUI and TOP AEG platforms, built around an aluminium axis bushing, two internal ball bearing bushings and a thermally treated pinion gear. Suits players wanting a faster cycle from their gearbox.
-

£49.99In stock
A long type high speed motor from GUARDER for MARUI and TOP AEGs, quoted at 40000 rpm. It suits builds running SP85 to SP110 springs with 8.4 V to 10.8 V batteries.
-

£49.99In stock
A long type motor for airsoft internal use, the GUARDER Infinite Torque-Up GE-01-10 weighs 250 g and carries thermal treatment. It suits users who need an aluminium axis bushing and two ball bearing bushings.
-

£28.49In stock
A steel bolt handle from GUARDER, made for the TYPE96 (NEW Type) rifle. It weighs 148g and is listed as an external part for owners of that specific model.
-

£13.69In stock
A 9mm GUARDER spring guide for the Type 96, made from S303 stainless steel and 6061 aluminium alloy. It weighs 20g and is aimed at players replacing internal parts who want a defined material specification.
-

£9.98In stock
An internal spring guide from GUARDER, sized at 7 mm and built from S303 stainless steel with 6061 aluminium alloy, weighing 14 g. Suitable for technicians servicing or rebuilding the Type 96 platform.
-

£10.49In stock
This GUARDER steel cutoff lever replaces the Version 3 gearbox part that governs semi-auto cutoff, made to Tokyo Marui dimensions. A practical swap for AK, G36 and MP5K owners whose semi-auto has become unreliable, or for high-torque builds.
-

£4.49In stock
A 70 degree hop-up rubber for AEG rifles, made by GUARDER and finished in black. A straightforward replacement component for technicians servicing or rebuilding a hop-up unit.
-

£4.49In stock
For AEG hop-up servicing, GUARDER offers this clear bucking. It is listed at 50° hardness in silica gel and weighs 4 g, suiting players who maintain their own AEG and need an internal part.
-

£13.69In stock
A GUARDER steel spring guide with a ball bearing arrangement for Version 3 gearboxes. It is aimed at airsofters and workshop technicians maintaining or rebuilding a Ver.3 gearbox who require this internal component.
-

£17.19In stock
GUARDER supplies this steel ball bearing spring guide for Version 2 gearboxes, seating the mainspring at the rear of the shell. It suits anyone stripping a Ver.2 box for a rebuild or spring change.
-

£7.09In stock
A spare air seal nozzle for P90-pattern AEGs from GUARDER, supplied as a replacement for the factory-fitted item. A sensible pick for servicing a well-used rifle or completing a gearbox rebuild.
-

£7.09In stock
A replacement air seal nozzle from GUARDER, listed as part SP-G-GE-04-38 for AUG-series and SR25 (GE) builds. A useful spare for technicians servicing gearboxes or completing an internal rebuild.
-

£7.09In stock
GUARDER supplies this air seal nozzle as an internal part for SIG Series airsoft replicas, aimed at gearbox maintenance and repair. It suits technicians and experienced players who check fit before reassembly.
-

£7.09In stock
A replacement air seal nozzle from GUARDER, intended for MP5K series airsoft replicas. It is an internal gearbox part suited to technicians carrying out maintenance or a rebuild.
-

£7.09In stock
The GUARDER air seal jet nozzle is an internal replacement part for G3 series airsoft replicas, aimed at rebuilding or servicing work inside the gearbox. It suits players and technicians who strip their own replicas.
-

£8.19In stock
The GUARDER air seal nozzle is a service part for MP-5 series AEGs, intended to replace a worn or damaged original inside the gearbox. It suits technicians and hobbyists already confident working on gearbox internals.
-

£10.49In stock
A gearbox internal part from GUARDER, this air seal jet nozzle is listed for M16A1, VN, XM177E2 and CAR15 rifles. Suited to servicing or repair work when the gearbox is already open.
-

£33.98In stock
Made by GUARDER, this three-part set for the APS-2 series covers the piston sear, trigger sear and spring guide stopper, all in S304 stainless steel. Suited to anyone servicing the rifle’s trigger unit.
-
Sale!

£269.99 Original price was: £269.99.£239.99Current price is: £239.99.In stock
The Guarder M4-A1 Full Gearbox Set (Infinite Torque-Up) provides exceptional performance for airsoft enthusiasts. This product features an enhanced Gearbox Ver.II, designed to accommodate the demands of competitive gameplay.
-
Sale!

£149.99 Original price was: £149.99.£139.99Current price is: £139.99.In stock
The Guarder SP150 Infinite Torque-Up Kit for TM M4-A1 Series offers an extensive solution for upgrading airsoft rifles. This full tune-up kit provides essential components designed to improve performance and reliability.
-


£17.99In stock
The Guarder Steel Trigger Lever is designed specifically for the MARUI 17 Series, including the GLK-21 model. This product enhances the functionality of your airsoft gun. The steel construction provides durability and reliability for consistent performance in various conditions.
-

£14.99In stock
The Guarder Enhanced Hop-Up Chamber Set is designed specifically for Tokyo Marui G26 and KJWorks G19/23 models. This product features a robust construction made from aluminium and steel, ensuring durability and reliability in various conditions.
-

£5.99In stock
The Guarder Gearbox Spring Set for Ver. II provides essential components for maintaining optimal performance. This set includes three screws, one tappet spring, one safety cover spring, one cut-off lever spring connected to the selector plate, and one switch spring.
-
Sale!


£14.99 Original price was: £14.99.£12.99Current price is: £12.99.In stock
The Guarder Enhanced Frame Spring Set for MARUI 19 Gen3/4 and 17 Gen4 is a crucial upgrade for your airsoft pistol. This product improves the performance of your weapon, ensuring reliable operation and a smooth firing action.
-
Sale!

£14.99 Original price was: £14.99.£12.99Current price is: £12.99.In stock
The Guarder Tokyo Marui A.E.G. Tune-Up Spring SP110 is designed for Airsoft AEG weapons. This product serves as a reliable replacement or upgrade spring. Users can improve the performance of their weapon with this essential component. The SP110 spring enhances the internal mechanics of the AEG, contributing to a more efficient operation. Installing this spring is straightforward, making it accessible for users seeking to optimise their gear. The quality of the spring ensures durability and reliability during gameplay. This product is an effective choice for those looking to improve overall functionality. Exploring the benefits of the Guarder SP110 will lead to better performance in the field.
-

£54.99In stock
The Guarder Infinite Torque-Up Short Type Motor (GE-01-11) provides exceptional performance for airsoft applications. This high torque motor features a short axis design, optimising space and enhancing manoeuvrability in various setups. Its advanced motor technology utilises efficient motor brushes, ensuring longevity and consistent operation.
-
Sale!

£139.99 Original price was: £139.99.£129.99Current price is: £129.99.Out of stock
The Guarder SP120 Full Tune-Up Kit for TM M4-A1 Series offers essential upgrades for airsoft enthusiasts. This kit includes a high-quality SP120 spring made from oil-quenched tempered Si-Cr alloy steel wire, ensuring durability and performance.
-

£14.99Out of stock
The Guarder Enhanced Loading Nozzle for MARUI 17/22/26/34 is an essential component for airsoft enthusiasts seeking reliability. This product is designed to improve the performance of your MARUI replica, ensuring consistent air seal and reliable feeding.
-


£14.99Out of stock
The Guarder MARUI 17/18C Enhanced Recoil Spring Guide is designed to improve the performance of your airsoft pistol. This product fits seamlessly into the MARUI GLK-17 model, offering enhanced stability during operation.
-

£14.99Out of stock
The Guarder Enhanced Hop-Up Chamber Set is designed for Army and Tokyo Marui M1911 models, including MEU and Detonics variants. This chamber set features a robust construction, made of high-quality aluminium and steel, ensuring durability and reliability in performance.