A 12mm loading nozzle in impact-resistant polymer for HUNTSMAN Pistol Series gas blowback pistols. Suits players carrying out routine maintenance, building a pistol or replacing a worn nozzle before a game.
HUNTSMAN Tactical Series pistol sights provide a notch-and-post aiming reference for airsoft handguns. A practical fit for players who want to change the sighting setup on a compatible slide.
A four-microphone headset from EARMOR that captures 360-degree sound and uses rapid noise cancellation to protect hearing. Aimed at competitive shooters, range officials and tactical training users.
The EARMOR M300X is a yellow active hearing protection headset with four-microphone pickup and rapid noise cancellation. It suits competitive shooters, tactical trainees and range officials who need to hear commands clearly while protecting their hearing.
A white ear defender aimed at competitive shooters and tactical training users. The EARMOR M300X uses a four-microphone pickup arrangement and automatic noise cancellation for work on the range.
A rechargeable pack and matching wall charger supplied together as one set. It suits DOUBLE M83 series owners who want a spare or replacement power supply without sourcing the parts separately.
A two-part gearbox shell set for the ARES M45 AEG platform, made up of GB-505 and GB-506. Aimed at technicians carrying out repair or rebuild work on the M45 gearbox.
This 430mm tight-bore barrel from ARES uses a 6.03mm bore and a polished copper/brass alloy core to keep air pressure consistent behind each BB. Suited to VSR-10, Amoeba Striker and long-barrel AEG builds.
The Mini Gun Shroud from CLASSIC is an external component for the front end of a mini gun build. It suits players repairing or altering an existing project.
Replacement O-rings for WELL PRO WG10 CO2 gas blowback magazines, covering the inner and outer seating rings at the capsule inlet and rear outlet valves. Aimed at owners servicing their own magazines on this platform.
A silicone seal set for WELL PRO WG10 gas magazines, with green and white O-rings for the inlet and outlet valves. It is aimed at airsoft technicians who need to service a leaking magazine or refresh worn seals.
A pair of replacement CO2 magazine valves for gas blowback setups, covering the inlet puncture assembly and the output release side. Suits those rebuilding WELL PRO WG10 magazines or MWS-pattern CO2 mags that leak or cycle poorly.
Housed in a reinforced polymer body, this gas blowback nozzle assembly lets you set muzzle velocity with an adjustment tool. It fits Well PRO XM5/XM7 and Rattler rifles plus Tokyo Marui MWS ZET platforms.
A polymer hi-cap AEG magazine from DOUBLE for AK-series rifles, styled after the PMAG with a ribbed, textured body for grip. A practical spare for players who want to carry less weight than steel magazines.
The DOUBLE A-AK-01 is a metal high-capacity magazine for AK-series AEGs, wound by hand to keep feeding BBs into the hop-up. A sensible spare for players, rental sites and trade stockists.
A four-output charger from BIG that can manage several battery packs simultaneously, with up to 100W available on each channel. It is intended for club use, shop counters and busy venues where several packs need charging.
ACM Micro Deans type connectors, supplied as a matching pair of females for battery and power wiring. Suitable for airsofters who build, repair or rewire their own battery packs and leads.
A pair of male Micro Deans type connectors from ACM for battery and charger wiring jobs. A practical choice if you maintain your own packs and leads and want this connector pattern on the bench.
An 11.1V LiPo pack from ACM with a 1000mAh capacity and Deans plug, rated at 15C+ continuous discharge. It suits airsoft users whose gun is wired for Deans and set up to run an 11.1V battery.
An ACM LiPo pack rated at 11.1V and 800mAh, with a 25C/50C figure and a Deans connection. It suits users who already use this voltage and connector type.
A 1-4×20 scope from the DOUBLE line-up, with magnification that runs from 1× up to 4× and a 20 mm front lens. Suits airsoft players who prefer one optic that handles both tight, fast play and longer shots.
S&T supplies this alloy mount so Arisaka-pattern rifles can carry modern optics on a 20mm rail of roughly 95mm. It suits players who want a low-profile base for a scope or dot sight.
Built for 40mm launchers, the UFC STCART02SV gas shell carries 120 6mm BBs in front-loading tubes and fits M203, M320, EGLM and pistol-style units. It suits CQB and MilSim players wanting a metal-bodied shower shell.
A padded Olive Drab carrier from BIG, the Big Foot HMG M249 Gun Bag is made for full-metal support weapons. It suits support gunners needing dedicated storage, with retention straps and exterior pockets for large box magazines.
The SPIRIT 26ci 3000 PSI HPA reservoir has a factory-fitted V3 regulator and suits airsoft replicas, support weapons and remote-line builds. Its aluminium body, dual burst disks and gauge dial support field use.
A compact red dot sight from SIG, featuring a 3 MOA aiming point and a built-in 22mm Picatinny/Weaver rail interface. It is intended for airsoft rifles, airguns and MILSIM platforms where a small reflex optic is wanted.
A gas blowback magazine valve from CYMA and SP System, made for Tokyo Marui Hi-Capa pistols and MWS rifles. Suited to technicians and players servicing magazines who want consistent gas output and reliable cycling.
A GE 110mm mock suppressor with a 14mm CCW female thread, built from aluminium alloy with an anodised matte finish. It suits airsoft users who want to extend a barrel profile or cover a longer inner barrel.
A replacement O-ring seal for GOLDEN MC-20 series gas blowback magazines, supplied as a genuine factory spare. Suits players and site technicians rebuilding magazines that have lost gas pressure.
A factory-pattern OEM replacement for the MX-5 platform, supplied as a GOLDEN mechanical component or assembly. It suits airsoft technicians, armourers and rental fleet maintainers carrying out internal repairs or reinforcement.
An OEM gas magazine for the MX-4 blowback submachine gun, supplied as a spare for GOLDEN owners. Suited to players and armourers who want extra magazines built around a metal alloy shell and green gas operation.
A replacement gas blowback loading nozzle from STRATOS, made with Golden Eagle and set to roughly 1.5 joules. Suits players and technicians maintaining gas blowback replicas at that energy level.
The STRATOS MX-6-1J is a drop-in replacement loading nozzle for gas blowback replicas, supplied with a pre-fitted rocket valve and polyurethane seals. It suits site operators, rental fleets and workshop technicians working to a 1 Joule limit.
A replacement pneumatic valve assembly for compatible gas blowback systems, made by STRATOS with Golden Eagle. A sensible pick for workshops and service facilities rebuilding or maintaining guns where the original valve has worn.
An internal replacement valve for compatible Stratos X and Golden Eagle gas systems from STRATOS. Suitable for gas blowback platforms, it uses a metal alloy and brass build with polyurethane sealing rings for workshop and hire fleet use.
A factory-assembled internal pneumatic kit from SRC that covers the chamber housing, knocker valve, puncture seals, springs and clips in one module. Suited to technicians servicing CO2 platforms and rebuilding worn gas blocks.
An internal knocker valve for SRC CO2 chamber assemblies, supplied as part number T1-20. A practical spare for technicians servicing CO2 platforms and keeping rental fleet guns running.
A replacement indexing cylinder for the SRC Titan CO2 revolver, supplied as part T1-5(B). It is aimed at airsoft technicians and rental sites maintaining Titan revolvers.
Replacement sealing plates for APS Thunder series CO2 sound distraction grenades, supplied in a pack of 50. A practical bulk option for sites and frequent players who need to keep grenades sealed and running.
This APS three-piece kit gives airsoft players a reusable distraction device for close-quarters practice. It includes a core, spoon handle and three disposable M67-style shells.
This VFC MK25 loading nozzle assembly is a drop-in internal replacement for the MK25 gas blowback series. It suits airsoft technicians and pro-shop repair staff servicing GBB replicas.
The AceHive MOSCART is a 40mm launcher shell from ACETECH that holds 6mm BBs in a circular multi-chamber layout and reloads from a speed-loading tray. Aimed at rental sites and skirmishers running 40mm launchers.
A grenade shell and loader set from ACETECH for 40mm MOSCART use, supplied with an X Spawner dock that seats dozens of projectiles at once. It suits CQB sites, training groups and retailers supporting frequent game rotations.
The ACTECH Speedloader 12000 BBs holds up to 12,000 6mm BBs in an impact-resistant polymer housing and feeds them through a precision-moulded nozzle. It suits skirmish sites, training facilities and players filling a large number of magazines in a session.
A 7.4V 2000mAh 20C Li-Po pack from BIG with cells divided into three slim sections and Mini-Tamiya connectors. It suits AEG users who need to fit a battery into tight handguards, crane stock tubes or cramped classic handguard spaces.
A two-piece 7.4V 2000mAh lithium-polymer pack from BIG for AEGs where battery space is tight. The split nunchuck layout suits crane stocks and handguards with side channels, and it uses Mini-Tamiya connectors.
Slim three-cell 11.1V Li-Po stick pack from BIG, sized at 17 x 17 x 182mm with a Mini-Tamiya connector. It suits upgraded and Li-Po-ready AEGs with tight battery space, such as M4 buffer tubes and full-length AK receivers.
A slim 7.4V Li-Po stick pack from BIG for replicas with tight battery compartments. The 1300mAh 20C pack uses a Mini-Tamiya connector and suits crane stocks, buffer tubes and handguards.
HPA conversion adapter from AIRTAC for the Glock-magazine Maruyama SCW-9, letting the replica feed from MP5 AEG magazines. It suits competitive players and site operators wanting a secure, low-profile air-feed setup.
This SNOW thread adapter lets Tokyo Marui VSR-10 owners fit 14mm CCW muzzle accessories. It suits airsoft snipers who need to mount a suppressor, barrel extension or target illumination module on a compatible spring rifle.
This SNOW adapter fits MP5 A4 and MP5 A5 AEGs, converting the factory muzzle to a 14mm CCW male thread for tracers, flash hiders and mock suppressors. It is machined from anodised aluminium alloy with a wide internal bore.
The SNOW adapter gives the Marui APS2 SV Short Variant a 14mm CCW male thread for fitting a suppressor, amplifier or tracer unit. It is aimed at players who want to change the muzzle thread on that rifle.
A thread conversion adapter from SNOW for the Tanaka M700 bolt-action airsoft sniper rifle series. It gives the muzzle a 14mm CCW male thread for compatible suppressors and tracer units.
This SNOW adapter replaces the internal muzzle thread on a Maruzen APS Type 96 with a 14mm CCW male fitting. It gives you a standard mount for tracer units, flash hiders and silencers.
A pressure regulator and adaptor for HPA airsoft rifles, with adjustable output up to 150 PSI. The SAIGO Mitami connects to standard tanks, remote lines and quick-disconnect systems, and is aimed at technicians and players building or maintaining HPA setups.
A Tan cheek rest for SECUTOR Rapax stocks, adding a stable raised contact point for the face. It suits airsoft players wanting to adjust eye line with magnified sights and improve comfort during long periods behind the rifle.
The TOKYO tan suppressor-style muzzle device is for Tokyo Marui gas blowback pistols, with a CNC-machined aluminium alloy body and standard threads for compatible GBB barrels. It gives custom sidearms a coordinated front-end look while keeping muzzle weight low.
The TOKYO Micro Pro Sight is a compact RMR-style reflex optic for pistols and small carbines, using a shatter-resistant resin lens and a red dot with two brightness stages. It suits speedsoft players and Tan loadouts.
A 3000 PSI bottle regulator from the SPIRIT Titan Series, with brass threads, an aluminium body and dual burst discs. It fits standard 3K bottle threads and suits custom HPA builds or replacement setups.
A standalone 18650-size cell from LG, rated at 3.6V and 20A, intended for players and technicians who assemble or repair their own battery packs. Buy one or several to suit the pack you are putting together.
A backpack from CONQUER in the Mcbk colourway, made for carrying airsoft equipment to and from a site. A sensible option for players who favour a darker finish that matches their loadout.
A zip-access pack from CONQUER, finished in Rg and listed under vests in the product data. It is aimed at airsoft players who want a straightforward backpack for their kit.
The Mt Zip Backpack – Cb from CONQUER is a zip-entry backpack listed in the pouch category. It suits airsoft players who want to identify this model by its exact name and Cb code when checking their kit.
The Mt Zip Backpack from CONQUER gives airsoft players a zipped rucksack for transporting their gear to and from a site. It comes in the Mc colourway and suits anyone who prefers to carry their kit on their back.
Made by CONQUER, the Mt Zip Backpack is a black pack for carrying airsoft kit and everyday items. A simple choice for players who want one bag for game days and travel between events.
This clockwise-threaded muzzle attachment from WE is made for Hi Cappa airsoft pistols. Suited to owners building up a threaded pistol who need to match the thread direction on their barrel.
A 95cm rifle case from HWASAN, intended for carrying a gun to and from an airsoft site. It suits players who want a plain, practical case and who have checked their rifle’s length against the 95cm measurement.
Replacement spring for the HWASAN M210 AEG, supplied under the SP210 part code. A sensible spare for anyone servicing or repairing their own M210, or for technicians keeping internal parts in the workshop.
The SP150 spring from HWASAN is a gearbox internal for electric rifles, marked M150 for identification during a build. A sensible pick for home technicians already comfortable opening a gearbox.
This item is a spare spring for airsoft AEGs, carrying the HWASAN M120 and SP120 references. Aimed at players and technicians handling builds, repairs or servicing.
A 15cm threaded silencer for WE Series pistols that carries its own inner barrel inside the body. It also suits Armour Works and Army Hi-Cappa builds on a 9mm CW thread.
This HWASAN suppressor carries a 14mm counter-clockwise thread and a metal body, so it screws onto matching outer barrels on airsoft rifles and pistols. A sensible pick for a long rifle or a compact build.
44 users are watching this item:
Umarex H&K UMP-9 GBB Sub-Machine Gun
Thomas Hughes from Birmingham purchased
Huntsman 600D Waterproof Shooters Cushion Black
12 minutes ago
Jack Downing says:
Absolutely incredible customer service from these. Dave was wonderful and was very quick to resolve a minor issue I had with my online order. Delivery was also swift and the products are well packaged so there’s no worries about anything arriving damaged. Super chuffed with what I’ve received from Defcon.