Gate – PULSAR H Nozzle 21.15 mm [M4/M16] (N-PH-2115)
£29.99In stock
A 21.15 mm nozzle from GATE for the PULSAR H HPA setup, intended for M4/M16 builds. It suits players and technicians who need this specific size for maintenance or assembly.
![Gate - PULSAR H Nozzle 21.15 mm [M4/M16] (N-PH-2115)](https://www.defconairsoft.co.uk/wp-content/uploads/2026/11/Gate-PULSAR-H-Nozzle-21.15-mm-M4M16-N-PH-2115-400x300.jpg)
In stock
A 21.15 mm nozzle from GATE for the PULSAR H HPA setup, intended for M4/M16 builds. It suits players and technicians who need this specific size for maintenance or assembly.
![Gate - PULSAR D HPA Engine [ETU not included] (HPA-PD)](https://www.defconairsoft.co.uk/wp-content/uploads/2026/11/Gate-PULSAR-D-HPA-Engine-ETU-not-included-HPA-PD-400x300.jpg)
In stock
The PULSAR D air engine from GATE is offered here without its electronic trigger unit, so trigger control is chosen separately. Suited to players who already run GATE electronics and want to supply the ETU themselves.

In stock
A composite loading nozzle set for VFC AR GBB airsoft rifles, using the MAPLE RA-TECH Magnetic Locking NPAS design in Type 3 form. It includes a universal tool and suits players working on VFC AR GBB internal parts.

In stock
A replacement hop up chamber from MAPLE for the MK23 gas blowback platform, listed for the Tokyo Marui SOCOM MK23 and the Y&P MK23. Suited to owners servicing or rebuilding the hop side of these replicas.

In stock
A two-part replacement set from DOUBLE for the top of the magazine: the feed lip and gas rubber router, intended for the 303 Hi-Capa Series. Suits players who service their own gas magazines and renew worn parts.

In stock
A magazine lip and gas rubber router intended for the DOUBLE 778 in the SIG range. A practical spare for servicing gas magazines whose outlet seal or feed lip has worn.

In stock
A replacement magazine lip and gas rubber router for DOUBLE 723 – 1911 series gas magazines. Suits players maintaining their own gas magazines who want spare parts to hand.

In stock
Spare lip and gas rubber router for the DOUBLE 784 pistol magazine, part of the 1911 series. A useful item to hold for servicing or to bring a tired magazine back into use.

In stock
Replacement magazine lip and gas router set for DOUBLE 721 Glock-series gas magazines. A practical spares item for rebuilding a magazine whose lip or router has seen better days.

In stock
A magazine lip and gas rubber router from DOUBLE, intended for the 789 – Hi-Capa Series. Suited to airsoft players who need these components for DOUBLE Hi-Capa gas magazines.

In stock
The DOUBLE Kar98 Valve is an internal spare for the Double Bell Kar98, intended to replace a part that has worn out or been damaged. A sensible option for owners already comfortable stripping and rebuilding their rifle.

In stock
A replacement nozzle from GHK, coded M4-15-H and listed for the 1.5 joule DMR set-up. An item to consider if you are servicing a rifle built to that specification.

In stock
A base plate for the R615 Sand Viper magazine, produced by JAG in collaboration with TTI. A sensible addition for anyone maintaining that magazine who needs to replace the fitted plate.

In stock
This ACM adapter links a Tamiya male plug to an XT60 male connector with female pins, and it has no wiring between the ends. It suits airsoft users who need to run a Tamiya battery with XT60 equipment.

In stock
A spare feed lip for the ARMY G17 GEN 4 magazine, listed under part number A-73. A sensible item for anyone servicing their own magazines or keeping a small stock of replacement parts.

In stock
A replacement gas outlet valve for the ARMY G17 GEN 4 pistol magazine, listed under part reference A-43. Suited to servicing a magazine that has stopped holding gas and needs the valve renewing.

In stock
A replacement trigger sear from ARMY, listed under part number A-181 and made for the G17 GEN 4. It is aimed at owners and technicians who already strip and service the pistol’s internal parts.

In stock
A muzzle device listed for the M4/N4 MWS series, offered under the EMG Helios banner with Noveske and Double Eagle branding. A sensible pick for owners refreshing the front end of a G101-spec replica.

In stock
An EMG hop-up rubber intended for the Helios range built through the Noveske and Double Eagle partnership, listed as G101. A straightforward spare for owners who strip and rebuild their own hop unit.

In stock
Internal spare valves from EMG for Helios, Noveske and Double Eagle M4/N4 MWS magazines. They are intended for technicians and owners who service these magazines.

In stock
A left-hand bolt for the Double Eagle 700 Pro, listed under the DOUBLE brand as the M66. It suits left-handed players who prefer to work the bolt from the left side of the rifle.

In stock
A replacement bolt catch for 417 series rifles, catalogued by GOLDEN as part MA18001. A useful spare for players who service their own replica or are finishing a build.

In stock
Replacement components for the T106 airsoft gun, offered by GOLDEN as individual parts rather than a complete unit. A practical choice for owners servicing or repairing their own gun who need to swap out a single worn component.

In stock
Replacement components for the GOLDEN T101, listed individually so you can pick the exact piece required. A practical option for servicing or repairing a T101 that is already in use.

In stock
An individual GOLDEN spare component carrying the part number T085, intended for repair or replacement work on airsoft equipment. A sensible choice for players and technicians who already have the part number confirmed.

In stock
A spare internal component listed by GOLDEN under part number MD009003. Aimed at owners handling their own repairs who can match the number to the part being swapped out.

In stock
An individual internal component from the GOLDEN spare parts catalogue, identified by the code MD008010. Order by part number if you are replacing a worn or broken piece in your gun.

In stock
A replacement internal component for airsoft builds from GOLDEN, identified by the M2*3.4 marking. It suits players carrying out their own maintenance who need to swap out a matching part.

In stock
An individual internal component carrying the M-214 reference, sold on its own for repair or servicing work. A sensible pick if you already know the exact part your GOLDEN replica needs.

In stock
The ACM split-format NiMH battery pack is rated at 9.6v and 2200mAh, assembled from 4/5SC cells with a Mini Tamiya connector. It suits airsoft players who need a two-section pack for a cranestock layout.

In stock
A clear stand from BIG that gives an airsoft pistol its own place between uses. It suits players who want a simple way to present a pistol at home or keep it apart from other kit on site.

In stock
A mosfet module from the GATE ASTER range, supplied in the V3 SE Basic Module variant. Aimed at players planning an AEG electronics build who want to match a specific ASTER part number.

In stock
The inlet valve for the Double Bell Kar98, offered by DOUBLE as an internal replacement. A practical spare for anyone servicing the rifle’s gas system or tracing a leak at the fill point.

In stock
The CREEPER EU Gen3 HPA adapter links AAP01 and AAP17 platforms to an M4-pattern air supply. Aimed at players assembling an air-line set-up around these pistols who need the matching conversion component.

In stock
A 7.4V LiPo pack from ACM with 1300mAh capacity and a 20C/25C rating, sized at 94 x 31 x 13mm. It is aimed at players who need a battery matching these published dimensions and figures.

In stock
A silver TTi-08S base plate cover for G Series magazines, produced by EMG under licence from Taran Tactical International. It suits players refreshing the base of Tokyo Marui, Army, WE, Armorer Works or Huntsman magazines.

In stock
EMG supplies this gold base plate cover for G Series magazines as a licensed Taran Tactical International part. It suits Tokyo Marui, Army, WE, Armorer Works and Huntsman magazines, but not VFC or GHK Glock magazines.

In stock
A charging unit from CYMA for automatic electric pistol batteries, offered in UK plug form and supplied without an adapter. It suits players who want a spare or replacement charger covering several AEP makes.

In stock
The GOLDEN AEG main spring fits electric airsoft guns and is catalogued under the MB-96 reference at 1 Joule (328 FPS). A practical option when servicing a gearbox or swapping out a worn spring.

In stock
Replacement magazine release for the ARMY R17 Metal Version airsoft pistol. A model-specific spare part for owners replacing a lost or damaged release on their pistol.

In stock
An electronic switching module for AUG-pattern AEGs, supplied by ARMY with its wiring already in place. A practical pick when refreshing a tired circuit or renewing the loom in a well-used rifle.

In stock
A 1 joule spring from DOUBLE, made for the M904G, M904N and M907E rifles and quoted at 328 FPS. Suited to servicing or rebuilding one of these AEGs.

In stock
The ACM M110 power spring is a main spring for airsoft electric guns, made from heat-treated alloy spring steel wire. It suits players rebuilding a standard V2, V3, V6 or V7 gearbox who want moderate velocity.

In stock
An ACM spring for airsoft internals, quoted at 430 FPS. A straightforward option for someone rebuilding or refreshing a replica who needs a known velocity figure to work to.

In stock
The WARFET Power Module from GATE is a MOSFET for an AEG’s wiring. It is aimed at technicians and hobbyists doing electrical work, repairs or a fresh build.

In stock
A control-electronics component from GATE’s TITAN family, supplied as the Expert Blu-Set version of the V3 model. Suits players building or updating an airsoft rifle who want this specific GATE package.
![Gate TITAN V2 NGRS Expert Blu-Set [Front Wired]](https://www.defconairsoft.co.uk/wp-content/uploads/2026/11/Gate-TITAN-V2-NGRS-Expert-Blu-Set-Front-Wired-400x300.jpg)
In stock
This front-wired MOSFET from GATE sits in the TITAN V2 NGRS range and is supplied in Expert Blu-Set form. It suits players building or upgrading an AEG who need a control unit matched to the NGRS layout.
![Gate TITAN V2 Basic Module [Front Wired]](https://www.defconairsoft.co.uk/wp-content/uploads/2026/11/Gate-TITAN-V2-Basic-Module-Front-Wired-400x300.jpg)
In stock
A front-wired MOSFET unit for version 2 gearboxes, supplied as the Basic Module in the GATE TITAN line. Aimed at technicians assembling or refreshing a front-wired AEG who want this unit as part of the build.
![Gate TITAN V2 Advanced Set [Front Wired]](https://www.defconairsoft.co.uk/wp-content/uploads/2026/11/Gate-TITAN-V2-Advanced-Set-Front-Wired-400x300.jpg)
In stock
A front-wired electronic control set for airsoft electric guns, the GATE TITAN V2 Advanced is supplied as a set. It is intended for players and technicians comfortable working inside a gearbox.
![Gate TITAN V2 Expert Blu-Set [Front Wired]](https://www.defconairsoft.co.uk/wp-content/uploads/2026/11/Gate-TITAN-V2-Expert-Blu-Set-Front-Wired-400x300.jpg)
In stock
Front-wired GATE TITAN V2 Expert Blu-Set, a MOSFET component for airsoft builds that need the wiring routed to the front. Suited to technicians and players specifying this exact TITAN variant.
![Gate TITAN V2 Expert Blu-Set [Rear Wired]](https://www.defconairsoft.co.uk/wp-content/uploads/2026/11/Gate-TITAN-V2-Expert-Blu-Set-Rear-Wired-400x300.jpg)
In stock
A rear wired mosfet unit from GATE for version 2 gearbox builds, sold in the Blu-Set configuration. A straightforward choice for technicians assembling an AEG who want the electronics settled before the build goes together.

In stock
ACM Deans Type Connectors, supplied as one male and one female in a matched pair. A spare set for those maintaining battery packs, charger leads or wiring on their airsoft kit.

In stock
An internal spring for the ACM M101 AEG, marked with the SP101 designation. A sensible spare to keep for servicing or gearbox rebuilds on that platform.

In stock
A replacement spring for airsoft electric gun gearboxes, the ELEMENT M145 (SP145) is an internal component for servicing or rebuild projects. It suits players and technicians working on AEG internals.

In stock
A tan 6.3-inch tracer unit from WOSPORT that fits 14mm CCW threaded muzzles on airsoft rifles and pistols. Suits players who want to move a single tracer between several replicas.

In stock
A muzzle-mounted tracer unit from WOSPORT with a 14mm CCW thread, finished in black and measuring 6.3 inches. Suits players who want to run tracer BBs on any replica with a matching thread.

In stock
The WOSPORT Spitfire Flame Tracer is a tan, 3.5-inch tracer unit that screws onto a 14mm CCW muzzle thread. It suits players already running tracer ammunition on threaded rifles and SMGs.

In stock
This black custom slide from ACM is an external part for 17/18 series airsoft pistols, produced using CNC machining. It suits players assembling or updating a pistol build who want a plain black top end.

In stock
The ARMY thread adaptor converts a 9mm CW pistol barrel to 14mm CCW, letting you fit suppressors and tracers. It suits WE/AW and Army Armament 1911, Hi-Capa and Glock GBB pistols.

In stock
Black suppressor unit intended for the Socom Gear M107 and listed under reference AWC-50-A001. It suits M107 owners who want a suppressor specified for that rifle rather than a universal item.

In stock
A replacement cylinder valve for the Tokyo Marui 5.1 Hi-Capa, catalogued by PARTS under part number H51-22. Suits owners carrying out their own maintenance who need to match an existing part number.

In stock
A single cylinder valve spring from PARTS, listed as Tokyo Marui part H51-21 for the 5.1 Hi-Capa. Worth keeping as a spare if you strip and rebuild the internals of your pistol.

In stock
A rear Bomar type sight from the JAG Precision and Taran Tactical International licensed JW3 line. It is listed as an internal part for airsoft users who need a replacement rear sight and will check the fitment against their set-up.

In stock
Replacement magazine base from the licensed JAG Precision and Taran Tactical International JW3 line. A spare part for shooters refreshing a licensed JW3 build or renewing the base on a compatible magazine.

In stock
A front fibre sight from the JAG and Taran Tactical International licensed JW3 range, supplied as an internal part. Aimed at servicing or rebuild work that calls for this exact component.

In stock
JAG supplies this JW3 frame protector plate together with its fixing screw as a single set, produced under licence from Taran Tactical International. It suits players and techs who want a spare pair of these internals for servicing.

In stock
A small internal component for the JW3 licensed range, made by JAG Precision with Taran Tactical International. Suitable for airsofters working on the internals of a JW3 build or keeping a spare to hand.

In stock
JAG supplies this safety catch for the JW3 pistol as part of the Taran Tactical International Licensed line. Pick the left or right hand version to match the side of the pistol you are working on.

In stock
A soft Shore hop-up bucking for standard AEG units, the LAYLAX Prometheus Soft AEG Hop Rubber Purple includes a matching tensioner nub. It is aimed at sub-350 FPS / sub-1.3J skirmish builds and workshop or retail settings.

In stock
A hard grade hop rubber from LAYLAX for AEG hop-up chambers, supplied in red to identify the compound. It fits in place of the standard rubber and suits players rebuilding or refreshing their hop unit.

In stock
LAYLAX Prometheus Flat Hop Tensioner Bridge, a hop-up internal supplied as a pair with one soft and one hard tensioner. A practical option for anyone already stripping and rebuilding hop units.

In stock
The LAYLAX Prometheus Flat Hop Tensioner pack contains soft and hard tensioners for airsoft hop-up units. It suits players and technicians who want both pressure options available while tuning a build.

44 users are watching this item:
G&G TR16 SBR 308 MK2

George Mitchell from Leeds purchased
VFC x Stark Arms SA226T Optics-Ready GBB Pistol
7 minutes ago

Josh Bines says:
Had an absolutely tremendous experience from these folks; from the original purchase and asking questions about the RIF through to having work done on the RIF down the line by their tech, Earl.

Enjoy FREE SHIPPING
on all orders over £200