This GUARDER steel cutoff lever replaces the Version 3 gearbox part that governs semi-auto cutoff, made to Tokyo Marui dimensions. A practical swap for AK, G36 and MP5K owners whose semi-auto has become unreliable, or for high-torque builds.
A 70 degree hop-up rubber for AEG rifles, made by GUARDER and finished in black. A straightforward replacement component for technicians servicing or rebuilding a hop-up unit.
For AEG hop-up servicing, GUARDER offers this clear bucking. It is listed at 50° hardness in silica gel and weighs 4 g, suiting players who maintain their own AEG and need an internal part.
A GUARDER steel spring guide with a ball bearing arrangement for Version 3 gearboxes. It is aimed at airsofters and workshop technicians maintaining or rebuilding a Ver.3 gearbox who require this internal component.
GUARDER supplies this steel ball bearing spring guide for Version 2 gearboxes, seating the mainspring at the rear of the shell. It suits anyone stripping a Ver.2 box for a rebuild or spring change.
A spare air seal nozzle for P90-pattern AEGs from GUARDER, supplied as a replacement for the factory-fitted item. A sensible pick for servicing a well-used rifle or completing a gearbox rebuild.
A replacement air seal nozzle from GUARDER, listed as part SP-G-GE-04-38 for AUG-series and SR25 (GE) builds. A useful spare for technicians servicing gearboxes or completing an internal rebuild.
GUARDER supplies this air seal nozzle as an internal part for SIG Series airsoft replicas, aimed at gearbox maintenance and repair. It suits technicians and experienced players who check fit before reassembly.
A replacement air seal nozzle from GUARDER, intended for MP5K series airsoft replicas. It is an internal gearbox part suited to technicians carrying out maintenance or a rebuild.
The GUARDER air seal jet nozzle is an internal replacement part for G3 series airsoft replicas, aimed at rebuilding or servicing work inside the gearbox. It suits players and technicians who strip their own replicas.
The GUARDER air seal nozzle is a service part for MP-5 series AEGs, intended to replace a worn or damaged original inside the gearbox. It suits technicians and hobbyists already confident working on gearbox internals.
A gearbox internal part from GUARDER, this air seal jet nozzle is listed for M16A1, VN, XM177E2 and CAR15 rifles. Suited to servicing or repair work when the gearbox is already open.
A steel sector gear made by G&G for the L85, intended for work inside the gearbox. It suits airsoft technicians and owners carrying out internal repairs or rebuilds who can confirm compatibility with their own build.
G&G supplies this reinforced PUR gear for the L85 gearbox. It suits airsoft technicians and owners carrying out servicing or rebuild work who need a replacement internal part.
Made by GUARDER, this three-part set for the APS-2 series covers the piston sear, trigger sear and spring guide stopper, all in S304 stainless steel. Suited to anyone servicing the rifle’s trigger unit.
This SPEEDLOADER holds 200 rounds and comes with seven front extensions for filling airsoft magazines. It is aimed at players who want to top up magazines at the safe zone or between games without handling loose BBs.
A black slide from TOP, intended for the Cyma CM125 USP full metal pistol and supplied as an external replacement part. It suits owners of that model who need to swap out the slide or keep a spare to hand.
A full metal top slide in black, produced by TOP for the Cyma CM122 and CM226. A practical pick for anyone replacing the upper slide on either pistol during a repair or rebuild.
This TOP item is a black top slide component for the Cyma CM121, catalogued as SP-CYMA-002-BLACK. It suits airsoft users and technicians looking for this listed external part.
The CLASSIC Version 3 gearbox shell is specified for 9mm metal bearings and catalogued under the reference SP-CA-002. It suits technicians and experienced builders tackling a V3 rebuild who already know the bearing size their build needs.
This BOLT internal part is the Blowback Unit Set listed for M4 airsoft rifles, identified by BA-016 and SP-BOLT-033. It suits users carrying out their own servicing who need to match the part references before ordering.
A tan internal component for BOLT builds, identified by the BA037 code and listed in the internal parts category. Compare the part markings and mounting arrangement with the item you are removing before ordering.
A black internal panel from the BOLT spares range, identified by part number BA037. Worth checking that number against your replica before you commit to an order.
A single replacement spring guide for the BOLT M4GB14, supplied as an internal spare part. It suits players and technicians servicing an AEG gearbox who want to swap out a worn original for a BOLT component.
A pair of panels from BOLT, sized for RIS rails, giving you two pieces to cover rail sections on a build. A simple way to change the surface along a handguard.
BOLT Honeycomb Handstop is a black front-end part for airsoft rifles with a patterned body. It suits players who want a defined resting point for the supporting hand on the handguard.
An ARES spare listed under reference SS-ARES-SS-3, this gearbox pin is a replacement internal component for airsoft replicas. It suits players who carry out their own servicing and want a spare on the bench.
A spring for AEG internals from ARES, identified by the M130 rating and the SPRING-09 reference. It is intended for players and technicians replacing or selecting components when servicing an AEG or working on a build.
A replacement gearbox spring from the ARES Amoeba internal parts line, carrying the M110 designation in its name. It is intended for technicians servicing or rebuilding an airsoft electric rifle who need a fresh spring for the build.
The M100 spring from ARES sits in the Amoeba internal parts range, marked with its rating in the product name. It is aimed at players who strip and rebuild their own gearboxes and want a defined spring option.
A single external component from the ARES Parts programme, identified by the AM-005 number and the LB-6 code. It suits anyone replacing a worn or damaged fitting on a compatible ARES rifle.
A genuine ARES internal component, catalogued under the GB281 part reference. A sensible pick for owners servicing or repairing an ARES replica who need that exact numbered part.
This long bearing spring guide is an internal replacement component for ARES Amoeba rifles in the AM-007 to AM-012 range. It suits airsoft technicians carrying out gearbox servicing, repair or build work.
This short bearing spring guide is an ARES internal part for the Amoeba AM-001 to AM-006 gearboxes. It suits a rebuild or refresh where the original guide has seen better days and the gearbox is already stripped.
A spare circuit board for the A&K STW (PTW) platform, supplied as an internal part. It is intended for technicians handling repair or maintenance on a compatible replica.
These A&K gear sets are internal parts for STW and PTW-type gearboxes, and the listing notes compatibility with Celsius systems. They are aimed at airsoft technicians carrying out rebuilds or repairs.
A complete gearbox assembly from ARES for M4-E and Amoeba platforms, fitted with an integrated ECU and set up for rear wiring. It suits players repairing or rebuilding a compatible AEG rather than sourcing separate internals.
A replacement circuit unit from ARES for M4 rifles that run a front-wire layout. Suitable for technicians and experienced owners carrying out internal repair or rebuild work.
Heavy 0.40g 6mm ammunition from DUEL, with a seamless surface worked through multiple polishing stages for close roundness. It suits precision sniper and DMR builds, and the white finish aids tracking through magnified optics.
A four-pack of ARES full moon clips in high-tensile spring steel, made for the S&W 686 APR-001, APR-002 and APR-005 and compatible CO2 airsoft revolvers. Each clip holds six shells for quicker cylinder reloads.
A 1000-round bottle of 0.45g biodegradable BBs from ARES, sized at 5.95mm with a +/-0.01mm tolerance and a diamond-polished finish. They are intended for outdoor players using precision rifles or sniper setups at long range.
ARES supplies these 0.45g biodegradable pellets for sniper rifles and designated marksman roles, packed in a resealable bottle of 500. The polished 5.95mm BBs suit outdoor sites that call for eco-polymer ammunition.
BIG supplies these 0.36g BBs in a 2500-round bottle aimed at long-range outdoor players. Ground and polished to 5.95mm, they suit snipers and DMR users wanting consistent heavy-weight ammunition.
BIG Big Foot Diamond Precision BBs are 0.36g heavyweight ammunition supplied 1000 to a bag, intended for DMRs and bolt-action sniper rifles. The polished shell and balanced core suit players who take fewer, more deliberate long-range shots.
A 1 kg pack of WORLD World Ball High Precision 6mm BB pellets in 0.25g black, supplied in the Standard specification. Suitable for airsoft players who want a set pellet weight and colour for their kit.
A 1 kilo standard pack of WORLD World Ball High Precision 6mm BB pellets in 0.30g, with a white colour. Suits airsoft players looking for 6mm ammunition in this stated weight and pack format.
WORLD World Ball 6mm BB pellets are supplied as a 1 kilo pack in white with a 0.25g weight. The Standard variant is aimed at airsoft players who have chosen 0.25g white BBs.
A 0.30g blue tracer option from the ARES x Amoeba Diamond Precision line, presented as bottles of 3300 pellets with 20 bottles in each box. It suits players who want this tracer specification supplied in bottle format.
These 0.30g tracer rounds from AMOEBA come in a 3300-round bottle and form part of the Ares x AMOEBA Diamond Precision range. They suit players who want a heavier tracer BB for following shot placement.
This box of twenty bottles from the ARES x Amoeba Diamond Precision range contains 3300 0.25g blue tracer BBs per bottle. It suits airsoft players who want a larger supply of tracer ammunition for regular sessions.
A bottle of 3300 blue tracer BBs from the ARES x Amoeba Diamond Precision range, with a 0.25g weight. They are aimed at airsoft players who want to track their shots during low-light gameplay.
Supplied as a box of 20 bottles, each holding 3300 0.20g blue tracer BBs from the ARES and Amoeba Diamond Precision range. Suited to skirmishers who get through ammunition steadily and want tracer rounds in quantity.
Blue tracer ammunition in 0.20g from the ARES x Amoeba Diamond Precision line, packaged 3300 to a bottle. It suits airsoft players who already run tracer setups and want this weight and colour in one container.
A bulk pack of 0.30g airsoft pellets from CL Design, sold under the BUSHIDO Master Grade name, with 4000 rounds in the bag. Suited to players who prefer to buy one weight in quantity.
BUSHIDO Master Grade BB Pellets come from CL Design as a 4000 BB pack in 0.28g. This is the option for airsoft players seeking that stated brand, weight and pack quantity.
A 4000-count pack of 0.20g BB pellets from CL Design’s BUSHIDO Master Grade range. A useful choice for players who want a sizeable reserve of ammunition on the shelf.
Six-millimetre BIO. BB pellets from SIGNA by Secutor, graded for sniper use and weighing 0.45g. The tub holds 1800 rounds, which suits players running precision rifles who want a single weight for long-range sessions.
Heavy 6mm ammunition for precision rifles: 0.40g sniper grade BB pellets from SIGNA in a 1800-round pack. Aimed at players running a precision rifle who want a BIO-marked heavy pellet.
Designed for RAM shotguns such as the APS Paintball RAM Shotgun, this pack contains 100 black 0.68 gauge projectiles at 3 g each. It is aimed at users who retrieve, rinse and dry their rounds.
A 500-BB bottle of ARES Amoeba Diamond Precision pellets, each listed at 0.45g. This bottled format suits players who use 0.45g BBs and want a contained supply for their kit.
White 0.30g BBs from Spitfire, supplied in a 5000-round bottle with a secure cap. A practical choice for players who want consistent feeding and repeatable accuracy from a heavyweight pellet.
A 5000-round bottle of SPITFIRE white 0.25g pellets with a secure cap for storage and pouring. Suited to skirmishers who want consistent feeding and repeatable accuracy from their ammunition.
A 2500-round bottle of SPITFIRE 0.30g white BB pellets with a secure cap and a smooth, seamless build. Aimed at regular skirmishers who want consistent ammunition in bulk.
A capped tub of 2500 white 0.25g pellets from SPITFIRE, moulded without a seam to help them cycle cleanly through a hop unit. Suits regular skirmishers who want predictable, repeatable ammunition.
A box of 20 bottles of ARES x Amoeba Diamond Precision Bio BBs, each bottle containing 3300 pellets at 0.30g. A practical bulk option for players who regularly use 0.30g ammunition.
ARES packs these Diamond Precision rounds 3300 to a bottle, and they are sold in boxes of 20. A biodegradable 0.23g pellet for airsoft players who like to buy their ammunition in bulk bottle form.
A 3300-round bottle of 0.28g BBs from the ARES x Amoeba Diamond Precision range, offered here as a box of 20 bottles. A practical choice for regular skirmishers who want a bulk supply of one weight.
Twenty bottles of 0.20g BB pellets from the ARES x Amoeba Diamond Precision range, with 3300 rounds in each bottle. A practical option for regular skirmishers who want a larger supply on the shelf.
This 0.30g Bio BB comes from the ARES and Amoeba Diamond Precision range and is supplied in a 3300-round bottle. Aimed at airsoft players who want a biodegradable pellet in a larger container.
A 3300-round bottle of 0.23g bio BBs from the ARES Amoeba Diamond Precision line. A sensible pick for skirmishers who want a mid-weight pellet in bulk rather than small packs.
A bulk bottle of 3300 Amoeba Diamond Precision BBs from ARES, with a 0.28g weight. A sensible pick for players who fill magazines and speed loaders from a larger container and want one weight kept together.
This 0.20g ammunition is packaged in a 3300-count bottle under the ARES x Amoeba Diamond Precision name. It is aimed at players who want to keep their BBs in one bottle rather than several smaller packs.
47 users are watching this item:
WADSN ML PL350-PLHv2 Style Pistol Light (Black)
George Mitchell from Leeds purchased
Saigo Defense Bushido Chugi Speedsoft M4 AEG Rifle (Blue)
34 minutes ago
Tom Stalker says:
Fantastic service, I bought my first ever AEG the other day and it came within 3 day. The chaps were brilliant help in answering all my questions and guiding me on what would be the best for me.