A tan HWASAN pistol case measuring 32cm by 25cm by 8.5cm. Suited to airsoft players who want a separate case for a pistol, with the measurements supplied so they can check it against their own equipment.
This WE adapter lets you mount a silencer on an Apache MP series replica, and doubles as a replacement if the original part has gone missing. Suited to owners of that platform wanting to fit a suppressor.
The ACETECH Quark C Shotgun Tracer Unit, listed as PAT4010-B-001, is a tracer module intended for shotgun use with tracer BBs. It suits players who want to follow their shots in low light.
The ACETECH AGENT FMG9 is a tracer unit listed under part number PAT0800-B-002. It is aimed at players who want tracer BBs to be visible during play and who already know the fitment their setup requires.
An in-store presentation stand for SIG handguns and red dot optics, letting both be shown as one set. A practical option for retailers who want sight options visible next to the pistols they mount to.
A black chronograph from WOSPORT, offered here in the APP version. It suits players and technicians who want to take their own readings on the range or at the bench instead of guessing.
A black bipod from the WELL MGP Series, catalogued as AE-13 and listed for M4-pattern airsoft rifles. It suits players running that rifle family who want a support accessory from the same range.
The UNIVERSAL conversion kit turns a compatible pistol into a shouldered carbine, with adjustable stock and ambidextrous charging handle. It suits shooters wanting a steadier, carbine-style setup from a pistol they already own.
Two folding sights, one front and one rear, for M4-pattern airsoft rifles, from the ACM GEN2 Mabus range. Aimed at players who want the option of folding the sights down when they are not in use.
A steel cylinder from the SALVO Precision range, listed for the MWS platform and G104 series. It arrives without a spring or rod, so it suits someone rebuilding or servicing who already has those parts to hand.
Supplied as the cylinder alone, this SALVO internal part fits the MWS G104 series and arrives without a spring or rod. It suits players servicing that assembly who already hold those parts or will source them separately.
The MWS Series Outer Barrel from DOUBLE is a single replacement external part for rifles in that range. It suits owners replacing a worn original barrel or finishing a build on the MWS platform.
A DOUBLE brass inner barrel for MWS-pattern gas blowback rifles, featuring a micro-polished bore. A straightforward accuracy part for players refining a build or technicians servicing hop-up units.
These G101 magazine feed lips are the replacement top section that keeps BBs held in the magazine and feeding into the hop unit. A sensible spare for EMG Helios, Noveske and Double Eagle M4/N4 MWS owners.
The EMG G101 is a spare for the catch mechanism inside the Noveske N4 MWS gas blowback rifle. Owners and workshop staff can keep one ready to replace a worn original and restore the hold-open action.
EMG hop-up base and adjuster assembly for Helios, Noveske and Double Eagle M4/N4 MWS rifles. A practical choice when the existing hop unit needs renewal or the hop setting has to be changed on a compatible gun.
A trigger box unit for the G101, offered by EMG as an internal spare for the Helios M4/N4 MWS range built with Noveske and Double Eagle. Suited to servicing work on the trigger assembly.
An app-connected chronograph from WOSPORT for measuring BB velocity when testing airsoft replicas. A practical choice for players checking their own builds, technicians working on the bench and site staff carrying out morning checks.
A single replacement sear for the ARES 308 Series, listed under part number UB-194. A useful spare to keep on the bench if you service your own trigger mechanism.
A nozzle part for the ARES HPA Engine (HEB-001), sold as a single internal component. It is aimed at people maintaining or repairing an existing HEB-001 engine.
An internal hop-up assembly for rifles in the ARES 308 line-up, supplied as a replacement for the factory-fitted part. A sensible choice when rebuilding a 308 Series replica or dealing with a worn original.
An APS internal spare part carrying the CAM035 reference, supplied as a reinforced push pin for renewing the original in an airsoft replica. A practical pick for a repair or rebuild where the existing pin needs replacing.
Pink base plate for the AM45 Vorpal Bunny magazine, listed by DOUBLE under the 796-1-JD code. A suitable part for owners who need this specific magazine base plate.
This WOSPORT foregrip gives airsoft users an adjustable, modular piece for the front of their rifle. It is aimed at those who prefer to tailor their grip setup rather than keep a fixed arrangement.
An olive drab forward grip from WOSPORT that can be adjusted and reconfigured to suit the shooter. A sensible pick for airsoft players who like to alter their front-end setup.
A black foregrip from WOSPORT that can be adjusted and reworked to change where the support hand sits on the front end. A sensible pick for players who like to alter their set-up rather than leave it fixed.
This WOSPORT torch is the M-PLHV2, finished in tan and described as a High Power flashlight. It is aimed at airsoft users who need this particular model or a tan-coloured torch for their setup.
This black torch from WOSPORT carries the M-PLHV2 model name and is described by the manufacturer as a high power flashlight. A straightforward pick for players who like to have a light source in their kit.
The S-M600DF torch set from WOSPORT is supplied in a tan finish and packaged as a set. It is an option for airsoft players adding a torch to a tan-based loadout.
A black high power torch from WOSPORT, packaged as a set rather than a single unit. Suited to airsoft players who need their own lighting for indoor sites, evening games and dark corners of a woodland field.
A replacement external cover for the AR308 buttstock, catalogued by ARES as a spare part. Suitable for airsoft skirmishers and gun technicians who are servicing an AR308 and require the cover piece alone.
A replacement hop rubber from the ARES spare parts range, listed for the AR-308 GB-2. A sensible item to hold if you maintain your own rifle and want to refresh the hop component during a rebuild.
A replacement inner barrel supplied by ARES for the AR-308, categorised as an internal part. It is intended for players who service their own rifles and need to replace this component within the barrel assembly.
The SNOW 130mm x 30mm mock suppressor is for M4 and AR-15 airsoft rifles with a 14mm CCW thread. It suits players and workshops fitting a mid-length muzzle accessory in matte black aluminium.
The SNOW Long Silencer threads onto a 14mm CCW outer barrel, extending the front end of a rifle so a longer inner barrel or drop-in tracer unit can sit inside the tube. It suits M4, AR15 and similar platforms.
This T&D rubber bayonet fits AK47 and SVD rifles through a muzzle ring and lug channel, and comes with an olive drab scabbard. It suits milsim players and display setups wanting bayonet fitment without a rigid edge.
Replacement hop unit for the SNOW SW-027 SVD, supplied as a built-up assembly with adjustment arm, clips and O-rings. Suits players rebuilding a worn rifle or refreshing the hop on an existing SVD build.
A replacement structural part for the SNOW SW-027 SVD sniper rifle series, made in composite polymer with reinforced zinc-aluminium alloy. Suited to airsoft technicians carrying out servicing or mechanical repair on the SW-027 platform.
A drop-in factory part for the SNOW SW-027 SVD sniper rifle series, produced in composite polymer and reinforced zinc-aluminium alloy. Suits technicians replacing a worn original or building a platform from a known baseline.
A split-style front handguard for the SNOW SW-027 SVD series, moulded in polymer composite and shaped to fit the factory retainer cap and receiver block. It suits owners replacing the original forend on compatible rifles.
This rear stock assembly from SNOW fits the SW-027 SVD sniper rifle series and arrives as a complete replacement kit. It suits players rebuilding a worn or damaged stock on a rifle already in service.
Replacement trigger assembly for the SNOW SW-027 SVD sniper rifle series, supplied as a complete unit with sears, springs, trigger shoe and housing. A practical option for technicians repairing or servicing SW-027 rifles.
Drop-in gearbox assembly for the SNOW SW-021 MP18, supplied with steel gears, a piston assembly, low-resistance wiring and a motor interface already installed. Aimed at airsoft technicians and repair centres undertaking a rebuild or internal repair.
A replacement outer shell for SNOW SW-11 magazines, listed under part code 616065. Suited to players and rental sites renewing casings that have taken knocks, with drop-in fitment and no tools needed.
This SNOW internal wiring assembly suits SW-11 series repairs in a workshop setting, replacing damaged loom and terminal parts with factory routing. Technicians wanting a straight swap without cutting or soldering will find it matches the original layout.
A zinc alloy split housing for the SNOW PPSh-41 AEG, comprising two side plates and the matching structural screws. It is aimed at workshops and players who need to replace a cracked shell or assemble a vintage-style replica.
A polymer replacement stock for the Snow Wolf PPSh-41, finished in imitation wood grain with metal reinforcement brackets. It keeps the large internal battery compartment and suits players wanting wooden looks without natural timber.
A metal alloy outer barrel for the SNOW PPSh-41 AEG, supplied in matte black for M9-07 and M9-D17 models. It suits airsoft technicians, retailers and historical re-enactors repairing or rebuilding a worn front end.
A 271mm barrel component for the SNOW Snow Wolf PPSh-41 AEG, listed under the M9-80 code. It is intended for players and workshops working on PPSh-41 builds.
A spare stock connect pin for the SNOW PPSh-41 AEG, listed as part M9-D13. It suits players refurbishing a worn stock joint or workshops keeping this rifle model serviceable.
This inline fuse loom replaces the wiring on a SNOW PPSh-41 AEG, combining copper conductors with an integrated fuse to protect the motor, gearbox and battery. A practical spare for players and workshop technicians servicing the platform.
A replacement charging handle assembly from SNOW for the Snow Wolf PPSh-41 AEG, supplied with the bolt lever handle and mounting and return spring interface parts. It is aimed at airsoft technicians, custom builders and retailers servicing these replicas.
A metal alloy hop-up chamber from SNOW, intended for the Snow Wolf PPSh-41 AEG and supplied as an alternative to the standard polymer housing. The set includes retention clips and internal tensioning parts for fitting.
A fully built replacement gearbox for the SNOW M1938 AEG, ready to fit without assembling individual parts. Suits technicians repairing a customer’s replica and players restoring an M1938 for skirmishing.
Replacement power unit for the Snow Wolf M3A1 (SW-06) airsoft replica. Fitting the grip frame directly, it comes with wiring, terminals and housing parts for workshop or owner installation.
A complete replacement gearbox built for the Snow Wolf M3A1 (SW-06) AEG. It arrives assembled and pre-lubricated, and suits technicians repairing or rebuilding a worn M3A1.
A replacement steel control lever from SNOW for the Thomson M1A1 and compatible Tommy Gun AEG gearboxes, supplied as part M5-18. Suited to airsoft technicians and workshop builds needing dependable semi-automatic fire control.
A ready-built assembly for SW-05, SW-11 and M1A1 Tommy Gun AEGs, supplied by SNOW with steel gears, a high-compression piston and a cast metal housing. Trade workshops, bespoke builders and period re-enactors make up its target users.
Casings intended for use with TAG MK2 ammunition, catalogued under part code CSEMK2 and referred to as the KC Shell. A practical choice for players who maintain their own grenade and projectile kit and want the correct part identified.
Small long pin offered for WELL and WELL Pro airsoft guns as an internal spare. A practical item to keep for servicing or repair work when a pin is lost or worn.
This small threaded pin is an individual internal component from the WELL spares selection, intended for Well and Well Pro airsoft guns. It allows replacement of a lost or damaged pin during maintenance.
Replacement spring from the WELL parts selection for Well and Well Pro airsoft guns, classified as an internal component. A sensible choice for anyone tackling their own repair or routine rebuild work.
A small spare clip for Well and Well Pro replicas, drawn from the WELL parts selection. Handy to keep in your toolbox for servicing sessions and rebuilds.
A spare gear from the WELL parts range for Well and Well Pro airsoft replicas. Aimed at owners carrying out repairs or keeping internal spares for maintenance.
A black grip designed to fit M4 series rifles, offered by CYMA as an external part. Suits players who need to replace a worn grip or change the furniture on a rifle they already own.
The BATTLEAXE adapter threads onto MP5-pattern airsoft replicas to accept a 14mm CCW suppressor. It suits players who already own a counter-clockwise silencer and want to fit it to an MP5 series gun.
A spring for airsoft electric guns, offered by ELEMENT as an internal spare for gearbox servicing and rebuilds. A practical option when the spring in an existing build needs swapping out.
A metal nozzle for MP5 series airsoft rifles from D, fitted at the gearbox outlet to pass air into the hop-up. Suits players servicing their own gearbox who want to change the original nozzle.
A tan-coloured long foregrip from D|Boys, made for the front end of an airsoft rifle. A practical pick for players who want extra grip length and a tan finish to match their build.
This micro reflex sight from TOKYO gives airsoft players a red dot reticle with adjustable illumination for close-quarters play. It attaches to 20mm Picatinny or Weaver rails, and both high and low mount options are supplied.
A 600-round hi-cap magazine from TOKYO for 417 Series airsoft rifles. It suits players who want fewer reloads and a substantial ammunition supply during skirmishes.
20 users are watching this item:
Colt EMG MK12 MOD1 18" MWS GBB Rifle by Cyma CGS
George Mitchell from Leeds purchased
Vigor M870 Custom Tactical Pump Action Shotgun Two Tone Blue
19 minutes ago
Bailey Fitzgerald says:
Ordered my first GBBR, DE Noveske. the team was very helpful over the phone and made sure i got it before my weekend skirmish. much better service and reliability than the cursed Patrol Base!