Cyma CM030 Long Magazine (100 Rounds – C27)
£11.99In stock
A hundred-round long magazine from CYMA, identified by the C27 code and forming part of the CM030 line. A practical item to keep as a spare for skirmish days.

In stock
A hundred-round long magazine from CYMA, identified by the C27 code and forming part of the CM030 line. A practical item to keep as a spare for skirmish days.

In stock
A 30BB short-pattern magazine from CYMA, identified by the C26 reference and MAG-C26-122 code. It suits airsoft players looking for a spare magazine in the same short configuration for the CM122.

In stock
A 30-round short magazine from CYMA for the CM122 and CM030, marked with the C26 code. It suits owners of either model who want a smaller magazine carrying fewer rounds.

In stock
An electric double magazine for M4 rifles that carries 1200 rounds in a twin-body assembly. Suited to players who want a generous ammunition supply on the gun and fewer changes.

In stock
The M4 drum magazine supplies an M4-pattern rifle with 2300 rounds through an electric feed. It suits skirmishers and scenario players who would rather keep playing than keep reloading.

In stock
A motor-driven drum magazine for G36 rifles from SRC, using sound control to start the winding as the rifle fires. Aimed at G36 users who would rather not stop and wind by hand during a game.

In stock
A magazine-well adaptor from BATTLEAXE that converts a G39 to take M4 magazines. Aimed at players already running M4 magazines who want a single type across their kit.

In stock
A high-capacity AK-pattern magazine from BATTLEAXE, with a 1000-round capacity. It is aimed at airsoft players who want fewer reloads during long games or suppressive fire, and the design is intended for consistent feeding under rapid fire.

In stock
A 50-round low-cap magazine from AGM for MP40, MP41 and STEN series replicas, finished in black. It suits players who prefer controlled reloads and a defined ammunition count.

In stock
A 200-round spare magazine from JG for 550/552 AEG rifles, built with an ABS body and finished in black. It suits airsoft players who want a higher-capacity magazine for compatible rifles.

In stock
A 300-round high-capacity magazine for ARES Amoeba M4 rifles, moulded in tan polymer. Built for players who want a quick-rewind wheel, a grippy stippled body and a rubber base that cushions knocks.

In stock
A 140 round plastic magazine for ARES and Amoeba M4/M16 electric rifles, finished in tan with a textured body and a folding rubber pull piece. A practical spare for players who run several mid-capacity magazines and want quicker changes.

In stock
A 140-round mid-cap magazine for ARES and Amoeba M4/M16 series electric rifles, supplied in black with a plastic body. It suits players who want a textured grip and a rubber tab that folds out to help with magazine changes.

In stock
A 140-round P-Mag from ARES for M4-pattern rifles, built with a nylon shell, metal internals and a stippled finish for grip. The fold-out rubber base and flip-down pull tab help when the magazine is dropped or drawn from a pouch.

In stock
A full-metal VSS Vintorez platform from S&T with real wood furniture, supplied as an AEG sniper rifle. It is aimed at players who want a VSS Vintorez with the tracer and flash unit built in.

In stock
Built by S&T, this spring-powered Lee Enfield No.4 MkI SMLE replica uses real wood furniture. It suits airsoft players who prefer a manually operated rifle with a self-contained power source.

In stock
The DOUBLE M37F is a spring driven submachine gun in a black finish, forming part of the 61 Series line. It suits close-quarters sites and players wanting a back-up with no battery or gas to manage.

In stock
This spring powered submachine gun from DOUBLE comes in a black and faux wood finish as part of the 61 Series. It suits newcomers and anyone after a simple gun for garden practice.

In stock
A manually cocked UZI-pattern airsoft submachine gun from DOUBLE, supplied in black. It suits newcomers to the hobby who want a simple, battery-free gun for practice sessions.

In stock
A manually cocked airsoft pistol from DOUBLE, finished in black and designated the P328 CT25. It is a sensible choice for a newcomer learning the basics or for anyone wanting a simple sidearm that runs without gas or batteries.

In stock
Cocked by hand for every shot, this spring-powered pistol from DOUBLE needs no gas or battery to run. A sensible pick for newcomers and for players after a simple spare in black.

In stock
A spring action airsoft SMG in the M303F spec from DOUBLE, supplied in a black finish. A sensible option for newcomers, or as a spare gun to keep in the kit bag.

In stock
A black spring-powered pistol from the DOUBLE CZ Series, marked as the M24. Aimed at players who prefer a handgun-format airsoft gun with a mechanical action and no gas or battery to keep topped up.

In stock
Part of the DOUBLE CZ Series, this M24 spring pistol comes in a blue finish and cycles by hand for each shot. A simple choice for players who want a straightforward sidearm with no gas or battery to manage.

In stock
The M301 from DOUBLE is a short, spring-driven PDW rifle finished in black. It is a sensible pick for airsofters who want a self-contained rifle for casual target shooting without gas or batteries.

In stock
The DOUBLE M302 brings the M3 Grease Gun shape into a spring powered airsoft gun with a black finish. It suits players and collectors who prefer a manual action with no gas or battery.

In stock
The DE36 from DOUBLE is a black airsoft rifle with a spring action, made to the M41K2 pattern. It suits newcomers assembling a first setup, or anyone after a hand-cycled rifle to keep as a spare.

In stock
A hand-cycled spring airsoft rifle from DOUBLE, finished in black and modelled on the M16 and CAR-15. A practical pick for new players, garden practice or anyone after a spare rifle that needs no gas or battery.

In stock
A spring-powered airsoft shotgun from DOUBLE with a short stock and tri-rail front end, finished in black. It suits players who want a manually cycled shotgun in a shorter configuration.

In stock
Built around the M47A1 pattern, this DOUBLE airsoft shotgun is spring-powered and cycled by pump, with a full stock and tri-rail front end in black. It suits players after a manual shotgun setup.

In stock
The M50A from DOUBLE is a spring-powered sniper rifle in the VSR Series, finished in black and cycled by hand via the bolt handle. It is aimed at airsoft players who prefer a manual, single-shot approach.

In stock
A spring-powered airsoft shotgun from DOUBLE with a pump-action format, pistol grip and black finish. It suits players who prefer a manually cycled shotgun with tactical styling.

In stock
The M47C1 from DOUBLE is a pump-action spring shotgun finished in blue, built with a pistol grip instead of a conventional stock. It is aimed at airsoft players who like a manual, hand-cycled action.

In stock
The DOUBLE M47D1 is a black pump-action airsoft shotgun that runs on a spring mechanism, with the fore-end cycled by hand between shots. It suits players building a shotgun-format loadout.

In stock
DOUBLE M47D1 is a blue pump-action shotgun built around a spring mechanism, so each shot is readied by cycling the pump by hand. A sound choice for players who like a manual, self-contained airsoft gun.

In stock
An M4-pattern carbine from DOUBLE, built to full size with a RIS handguard and finished in black. Supplied as a complete all-in-one starter package, it gives new players a straightforward entry point into airsoft skirmishing.

In stock
Spring powered airsoft rifle from DOUBLE in a PDW layout, finished in black and marked with the M307F-BK model code. It suits players who want no battery or gas to manage and are happy to work the action themselves.

In stock
This manually cocked spring rifle from DOUBLE comes in a blue finish and carries the M307F-BL code. It is a sensible choice for players wanting a compact PDW-style rifle with no battery or gas to manage.

In stock
A self-contained option for airsoft shooters, the DE36 from DOUBLE runs on spring power alone, so no gas or battery is needed. It comes in a black finish and carries the M41G-BK product code.

In stock
A compact electric airsoft rifle from the CYMA Platinum range, built in the short AKS74U style and finished in black. It comes with an Eshooter ETU GEN-2 trigger unit already fitted, suiting players who prefer a shorter AK-pattern platform.

In stock
An electric-powered AK74 platform from the Platinum range, finished in black and shipped with the Eshooter ETU GEN-2 trigger unit already installed. Pick this CYMA rifle if you want a tactical AK74 for skirmish use — model CM113A.

In stock
An electric AKM-pattern airsoft rifle from the CYMA Platinum line, offered in black as the CM113. The Eshooter ETU GEN-2 trigger unit is included, so this variant is aimed at players wanting that electronics package in an AKM-format AEG.

In stock
A black CM002-GEN2 AEG from CYMA with a full-metal receiver and quad-rail RIS handguard. Its barrel extension pieces allow short or long layouts, which suits players covering tight and larger game areas.

In stock
A black SECUTOR Centurion V MWS airsoft rifle with a gas-powered blowback action on the Tokyo Marui MWS system. It is aimed at skirmishers who need a long MLOK handguard, adjustable stock and metal receiver set for longer-range play.

In stock
A compact gas blowback carbine from SECUTOR built on the MWS system, with an MLOK rail and full-metal receivers. Suited to players who want a short, accessory-ready rifle for CQB and fast drills.

In stock
A gas blowback rifle from SECUTOR with a full-metal receiver, MLOK forend and rotary hop-up adjustment. It suits players looking for an MWS-pattern platform to fit with a light, grip and sight.

In stock
A TTI-style M4 DMR from DOUBLE, factory-fitted with a Wolverine INFERNO Gen 2 HPA engine, Spartan board and 1-4×20 optic. It suits players wanting a pre-upgraded reconnaissance rifle with adjustable electronic control.

In stock
A pre-built HPA carbine for airsoft skirmishers who want Wolverine INFERNO Gen 2 performance in a licensed SIG package. The MCX Virtus ProForce pairs a full-metal receiver and M-LOK handguard with Spartan control electronics.

In stock
A pre-built sci-fi bullpup-style airsoft rifle from JG, fitted with Wolverine INFERNO Gen 2 HPA and Spartan electronics. It suits players wanting a distinctive HPA platform for close-quarters use.

In stock
This short M416-pattern rifle from DOUBLE comes with Wolverine INFERNO Gen 2 HPA power and a Spartan control board. It is aimed at players who want a compact Keymod front end for close-quarters games.

In stock
The TR-1 10″ M4E1 from EMG is a pre-built HPA rifle with a Wolverine INFERNO Gen 2 engine and Spartan control board fitted. It suits players after a compact, M-LOK front end without assembling the HPA setup themselves.

In stock
The DOUBLE 416-A5 comes as a full-metal rifle with a Wolverine INFERNO Gen 2 HPA engine and Spartan board already fitted. Aimed at players wanting a ready-built HPA platform with adjustable electronic control.

In stock
A tan, short-barrelled M416 rifle that arrives with a Wolverine INFERNO Gen 2 HPA engine already installed. The DOUBLE 819S is aimed at players who want a compact HPA build with Keymod mounting options.

In stock
An HPA-powered 9mm pistol calibre carbine from EMG, fitted with a Wolverine INFERNO Gen 2 engine and Spartan control board. It suits airsoft players who want a licensed Strike Industries and PWS platform with factory-installed HPA components.

In stock
Built around a Wolverine INFERNO Gen 2 HPA engine and Spartan electronics, the HUNTSMAN M4 PDW RONIN is a compact full-metal airsoft rifle with an M-Lok handguard. It suits players seeking a compact PDW platform with adjustable electronic control.

In stock
A full-metal L119A2 Neptune SAS platform from DOUBLE, supplied with a Wolverine INFERNO Gen 2 HPA engine and Spartan electronics. It is aimed at airsoft players looking for an HPA rifle with safe, semi and full-auto modes.

In stock
A compact M4 PDW airsoft rifle from HUNTSMAN that comes with a Wolverine INFERNO Gen 2 HPA engine and Spartan control board fitted as standard. Aimed at players building a short, HPA-powered setup for close-quarters sites.

In stock
The DOUBLE JW4 Dracarys M-LOK HPA Rifle comes with a Wolverine INFERNO Gen 2 engine and Spartan control board pre-installed. It suits players wanting a factory-built full-metal HPA platform with M-LOK furniture for accessories.

In stock
An HPA airsoft rifle from AGM with a Wolverine INFERNO Gen 2 engine, Spartan board and FCU battery fitted as standard. It suits re-enactors and tactical players who want historical styling paired with pneumatic operation.

In stock
A pre-built HPA rifle from DOUBLE, fitted with the Wolverine INFERNO Gen 2 engine and Spartan control electronics. Suited to players who want a film-inspired Keymod platform with factory-installed HPA internals.

In stock
A black subcompact SMG from DOUBLE, factory-fitted with a Wolverine INFERNO Gen 2 single-solenoid HPA engine and Spartan Edition control board. Suited to close-quarters players who want adjustable dwell and fire modes without external programming gear.

In stock
A convertible HPA/GBBR platform, the WELL PRO AK Blowback HPA uses a half-bolt system and a concealed HPA module. It is aimed at players wanting AK styling, semi and auto fire, and a 1.1J setup for CQB or mid-range use.

In stock
The ST SVT-40 is a full-length electric airsoft version of the Soviet wartime self-loading rifle. Finished in stained wood with a metal receiver and barrel, it suits Second World War impressions and historical skirmishes.

In stock
The ST SKS is an electric airsoft rifle modelled on the Soviet semi-automatic carbine, with a real wood stock and metal receiver. It suits collectors, reenactors and MILSIM players who want period detail on the field.

In stock
The XM5/XM7 MCX Spear from WELL PRO is a gas blowback rifle in the single steel bolt version, listed as WG68-10. It suits players who prefer a gas-cycled rifle with a moving bolt over an electric gearbox.

In stock
The WE05 is a compact electric sub-machine gun from the EMG and Strike Industries collaboration, built on the Well PRO platform. It comes with an Eshooter ETU and suits players who want a short AEG for CQB sites.

In stock
An MWS-pattern airsoft rifle from WELL, combining a black metal receiver with a tan handguard and matching furniture. It suits players looking for a full-metal M4 platform with scope for upgrades via MWS-compatible parts.

In stock
A gas blowback M4 rifle from WELL, built on the Tokyo Marui MWS system with a full metal black receiver and CNC-machined L119A2 handguard. It suits players who want MWS upgrade compatibility and a full-auto capable GBB platform.

In stock
A gas blowback rifle from DOUBLE that follows the Tokyo Marui MWS layout, supplied with a folding ACR-style stock and M-LOK handguard. It suits players who want a field-length MWS-pattern platform with a steel bolt.

In stock
A gas blowback rifle from DOUBLE with a folding skeleton stock and MWS-pattern magazine compatibility. It suits airsoft players who want a compact-transport rifle with a CNC aluminium receiver and steel bolt carrier.

In stock
A Tokyo Marui MWS-based gas rifle, the DOUBLE 13.7 DWS LUPUS has a side-folding stock, M-LOK handguard and steel bolt carrier. It is aimed at airsoft players who want an intermediate-length gas rifle for outdoor sites.

In stock
A gas blowback rifle from DOUBLE that runs the Tokyo Marui MWS system, with a CNC aluminium receiver, steel bolt carrier and 8.5-inch M-LOK front end. Suited to players wanting a short, folding-stock platform for CQB games.

46 users are watching this item:
Umarex G36C GBB Rifle By VFC - Black

Thomas Hughes from Birmingham purchased
Saigo Defense Bushido Chugi Speedsoft M4 AEG Rifle (Blue)
38 minutes ago

Josh Bines says:
Had an absolutely tremendous experience from these folks; from the original purchase and asking questions about the RIF through to having work done on the RIF down the line by their tech, Earl.

Enjoy FREE SHIPPING
on all orders over £200