SHS M120 AEG Upgrade Spring (SP120)
£5.99In stock
An internal upgrade spring from SHS, marked M120 (SP120), for use inside AEG gearboxes. Aimed at technicians and hobbyists working on a build, a rebuild or a straight replacement.

In stock
An internal upgrade spring from SHS, marked M120 (SP120), for use inside AEG gearboxes. Aimed at technicians and hobbyists working on a build, a rebuild or a straight replacement.

In stock
The SHS M130 upgrade spring is a single replacement spring for AEG internals, supplied on its own. It suits players and technicians planning a rebuild or a spring change.

In stock
A torch from the FMA range, listed under the model number TB1448. It suits airsoft players who want a light source in their kit for indoor sites and evening skirmishes.

In stock
A THETA split 30 mm ring mount for RIS rails, supplied in the high configuration for raised optic placement. It is a practical choice for airsoft builds that need a two-piece fitting around a compatible tube sight.

In stock
This ACM rifle holder rack keeps airsoft guns organised and on show, with slots you can reposition to suit your layout. Aimed at shops, clubs and players who want rifles stored neatly rather than stacked.

In stock
ACM supplies this wall-mounted lock unit, which brings together a key-operated lock and a support ring in one fitting. It suits airsoft users who need locking hardware of this kind for storage or display.

In stock
A push-fit connector from ACM in the EU pattern, catalogued as an internal part. A sensible spare for technicians servicing or assembling a setup that already uses this style of fitting.

In stock
The DOUBLE Tactical Angled Fore Grip mounts to a 20mm Picatinny rail and gives the support hand an angled surface to hold. A tan-finished option for players who prefer a forward, thumb-forward hand position.
-400x300.jpg)
In stock
A mid-capacity magazine for SCAR-H rifles that carries 90 rounds and is offered in black and tan. The DOUBLE magazine suits players who want extra magazines to hand and quicker reloads in a skirmish.

In stock
This tan FSG grip from DOUBLE is offered on its own for anyone building, repairing or restyling an airsoft replica. A sensible choice when you want tan furniture or a deliberate two-tone finish.

In stock
An M-LOK vertical foregrip in tan from DOUBLE, made for airsoft replicas with a slotted handguard. A sensible pick if you want a fixed hand position at the front of the gun.

In stock
HWASAN metal revolver shells, sold as a set of six for 6mm airsoft revolvers fed by separate cartridges. Keep a spare set in a pouch so a mislaid shell does not interrupt a session.

In stock
A rigid black case from HUNTSMAN for airsoft pistols, with egg-crate foam inside and a dual-latch lid. It suits players who want their sidearm, spare magazines and gas carried together.

In stock
A Scar H stock in Tan from DOUBLE, listed in the external parts category. It suits airsoft users who need this stock pattern for a Scar H build or want a spare external component.

In stock
DOUBLE supplies this red replacement baseplate for the M4 TTI magazine, a single component that fits to the underside of the magazine. It suits players refreshing a worn or missing plate, or marking magazines they already own.
-400x300.jpg)
In stock
The DOUBLE SCAR-H Hi-cap Magazine holds 400 rounds in a black-bodied unit for SCAR-H rifles. A practical choice for skirmishers who want fewer magazine changes during a session.

In stock
Replacement shells for the DOUBLE M1894 series, supplied as a pack of ten. A sensible pick for anyone who wants several sets loaded ahead of a skirmish day or range visit.

In stock
The BIG Big Foot Heat XT30 male plug is built for high-drain airsoft AEG and RC hobby wiring, with gold-plated solid copper pins in a high-temperature nylon shell. A rear channel takes heat-shrink sleeving for insulated joints.

In stock
For HPA setups requiring a small 7.4V Li-ion pack, the BIG Big Foot Heat provides 350mAh at 15C with an XT30 connector and measures 12 x 21 x 40 mm. Check connector and charger compatibility before use.

In stock
The socket side of a BIG Big Foot Heat XT30 pair, this connector mates with the matching male plug. Keep it with your charging gear as a spare for lead repairs and rebuilds.

In stock
A tan internal pocket panel for tactical chest rigs from BIG, giving you an enclosed space for small kit inside the rig. A useful pick for players tidying up how their chest rig carries admin items.

In stock
This BIG item gives a chest rig an internal place for stored items. It is aimed at airsoft users who prefer their rig layout to be arranged from within.

In stock
A Multicam pouch for holding glow sticks, part of the BIG Big Foot line. A sensible pick for airsoft players who want their glow sticks kept apart from the rest of their kit.

In stock
The BIG Big Foot Glow Stick Storage Pouch keeps glow sticks together in tan-coloured kit, so marking items are easy to find. Suited to players who use illumination during evening games.

In stock
A tan chest rig from BIG, part of the Big Foot – R Assault line, worn across the front of the body. A sensible choice for players who want a chest-based loadout rather than a full carrier.

In stock
A plate carrier vest set in urban grey from BIG, built on the R JPC 3.0 carrier. A sensible pick for airsoft players who want a neutral-coloured rig to set up with their own pouches.

In stock
An assault-style plate carrier set from BIG, supplied in tan as part of the Big Foot range. A sensible pick for airsoft players who want to build a loadout around a carrier rather than a full vest.

In stock
A black plate carrier set from BIG, the R JPC 3.0 Assault Tactical model, supplied as a set for airsoft use. Aimed at players who want a dark-toned carrier to mount their existing pouches and accessories on.

In stock
A modular Multicam chest rig from BIG’s Big Foot range, arranged around the pouches you choose. It suits players who want to alter their loadout between games rather than run a fixed front panel.

In stock
A tan chest rig from BIG for airsoft use, with a modular design that lets you rearrange the layout. Suited to players who want their magazines and kit carried on the chest.

In stock
BIG supplies this black chest rig as a modular platform for airsoft use, letting you decide where pouches sit. It fits players who want a chest-mounted setup they can rearrange themselves.

In stock
Two-in-one display stand from BIG that can be used in either of two ways, so one piece covers display duty and a second role. A sensible pick for shops, clubs or collectors who want adaptable display kit.

In stock
This BIG adapter converts a two-point sling for single-point carry, so one sling can cover both layouts. It suits players who want to try single-point mounting without buying another sling.

In stock
This tan BIG Big Foot M-LOK mount adds a quick detach point for a sling, with a socket that takes a QD swivel. It suits players who want to move the sling position along the handguard.

In stock
A tan rifle sling from the BIG Big Foot range, intended to carry an airsoft gun across the body and keep the hands free. A sensible pick for players whose kit is already built around tan.

In stock
Carry your replica across the body and keep your hands free between contacts with this BIG sling. Part of the Big Foot range, it is a straightforward option for airsofters who want a simple strap rather than a rig.

In stock
A tan pouch that holds a single AR-pattern magazine, from the BIG Big Foot Assaulter range. Suits players who want one spare magazine to hand without adding a larger pouch to their kit.

In stock
The BIG Big Foot Assaulter Single AR Magazine Pouch carries one AR magazine in black. A sensible pick for skirmishers who want a dedicated slot for a spare mag on a lean loadout.

In stock
A tan rotating phone holder from BIG that keeps a handset fixed on your tactical set-up. A sensible pick for players who would rather have their phone on the kit than in a pocket.

In stock
The Big Foot from BIG is a rotating phone holder in Multicam, made to keep a handset with your kit during a game. It suits players who want their phone on them without stowing it in a pocket.

In stock
A rotating phone pouch from BIG in black, part of the Big Foot range. It is aimed at airsoft players who want a dedicated place to keep a phone while on the field.

In stock
This BIG product is a black navigation board that folds, listed in the pouch category. It suits airsoft players who want a navigation board as part of their carried kit.

In stock
A black balaclava from the BIG Knight Headgear line, supplied in the Extended Version. Aimed at airsoft players who want a simple head-worn layer that sits under a helmet or over other kit.

In stock
A black balaclava from BIG in the Big Foot – Knight Headgear line, classed here under masks and headgear. A practical layer for players who want the head and neck covered beneath a helmet, cap or goggles.

In stock
A radio-inspired keyring from the Big Foot selection by BIG, based on the PRC152 set familiar from airsoft comms setups. A neat pick for players finishing a loadout or anyone who wants kit-themed keys.

In stock
BIG Big Foot GPNVG18 four-eye NVG keychain in tan, a miniature of the quad-lens goggle assembly for your keys or bag. A neat extra for airsofters and night vision fans.

In stock
A keyring-sized take on the four-eye GPNVG18 goggle from BIG, finished in black. Suits airsoft players and kit collectors who want a small themed accessory for their keys or bag.

In stock
A small keyring piece from BIG styled after the AN/PVS31 binocular night vision goggle. It suits airsoft players and kit collectors who want a themed accessory for their keys or bag.

In stock
A tan keyring from the BIG Big Foot range, styled with TTI VIPER detailing. A small addition for players wanting a matching extra on their keys, lanyard or kit bag.

In stock
A black BIG Big Foot TTI G34 Key Chain for airsoft fans who want a small themed accessory on their keys or bag. It suits players and collectors familiar with the TTI G34 platform.

In stock
A tan-finished NVG mounting accessory for helmet builds from BIG’s Big Foot model. It offers airsoft players a low-weight way to add a night vision fitting to their headgear.

In stock
A tan helmet guide rail from BIG, part of the Big Foot line. It suits airsoft players who are assembling or refreshing a helmet setup and want a matching tan rail component.

In stock
A black helmet guide rail from BIG and part of the Big Foot line. It gives you a fixed spot on the shell for attaching accessories, which suits players kitting out a helmet for airsoft use.

In stock
A wireless in-ear audio option for airsoft players, sold under the Big Foot name from BIG. Suits those who want to keep a helmet or cap on while listening through Bluetooth.

In stock
A tan-coloured tactical goggle from BIG’s Big Foot range, catalogued in the glasses and goggles section. It suits players assembling a tan loadout who want a goggle-format eye covering.

In stock
A tan hard-shell holster from the WOSPORT 17 Series, moulded in Kydex for a slim, low-bulk fit on the player’s kit. Aimed at airsoft users who prefer a rigid holster body to a soft fabric pouch.
-400x300.jpg)
In stock
Tan-finished Kydex holster for SIG platforms, produced under the BIG name. It is intended for airsoft users seeking a lightweight sidearm holster for field games.
-400x300.jpg)
In stock
A hard-shell tactical holster in black Kydex, made by BIG for SIG-pattern airsoft pistols. A light option for players who want a rigid holster for their sidearm while keeping the weight down.
-400x300.jpg)
In stock
A Kydex tactical holster from BIG in the Big Foot line, offered in the TTA variant. It is aimed at airsoft players who need a lightweight holster for their loadout.
-400x300.jpg)
In stock
The G-01 pattern is a Kydex tactical holster from BIG, designed with low weight in mind. It suits airsoft players who want a defined place for a pistol without adding weight to the rest of their kit.
-400x300.jpg)
In stock
BIG’s Big Foot holster uses a Kydex shell in a lightweight tactical format, catalogued under the G-X300 reference. It suits airsoft players putting together a belt or rig setup who want to keep the weight down.

In stock
A black modular base for building a Big Foot holster set-up. Suits airsoft players who want to assemble their own mounting arrangement from BIG components.

In stock
Belt-mounted adapter from the BIG Big Foot range for modular holster setups, finished in Multicam. It suits airsoft players who want to attach a compatible holster to their belt as part of a camouflage-matched kit.

In stock
A tan belt adapter from the BIG Big Foot modular holster range. It gives players a way to mount a holster on a belt-based rig, and suits those building or adjusting a belt loadout.

In stock
The Big Foot Modular Holster Belt Adapter from BIG is a black belt-fit item for modular holster arrangements. It suits users building or altering a compatible holster set-up who need the belt-side component separately.

In stock
A standalone tan mount for G-Code’s RTI DUTY interface, supplied by BIG as a separate part rather than with a holster. It is aimed at players building or refreshing a duty-style carry setup.

In stock
A black G-Code RTI DUTY mounting part from the BIG Big Foot line. It suits airsoft users who are putting together or changing an RTI duty carry arrangement and need this specific mount.
-400x300.jpg)
In stock
A quick-release mounting adapter from BIG for G-CODE compatible holsters, supplied in the 39 – Black variant. It is aimed at airsoft players who want to add a quick-release interface to an existing G-CODE holster setup.
-400x300.jpg)
In stock
A quick release mounting adapter from BIG for G-CODE pattern holsters, finished in black as the 33 variant. A sensible pick for players rebuilding a belt or platform setup.

In stock
Carry option for the P320 M17/M18 from BIG, finished in tan. Suited to airsoft players who run that pistol as a sidearm and want their holster to sit with a tan loadout.

In stock
BIG supplies this tan holster for P320 pistols that have an X300 light attached, so pistol and torch travel as one unit. It suits players who skirmish with a torch mounted and want tan kit to match.

In stock
The Big Foot long adapter base from BIG, finished in tan. A mounting part for buyers building or adjusting a tactical holster setup who want the long variant.

24 users are watching this item:
HFC ST8 Gas Pistol Kit, gas included, ready to play

Thomas Hughes from Birmingham purchased
Huntsman 600D Waterproof Shooters Cushion OD
1 hour ago

Jack Downing says:
Absolutely incredible customer service from these. Dave was wonderful and was very quick to resolve a minor issue I had with my online order. Delivery was also swift and the products are well packaged so there’s no worries about anything arriving damaged. Super chuffed with what I’ve received from Defcon.

Enjoy FREE SHIPPING
on all orders over £200