A long adapter base from BIG, part of the Big Foot tactical holster range and supplied in black. Suits players who already use a Big Foot holster and need this variant for their mounting set-up.
A short adapter base in tan for tactical holster setups, part of the BIG Big Foot line. It suits players who want to alter or finish a holster arrangement with a shorter base.
An adapter base for Big Foot tactical holsters, supplied in black as the base component on its own. A practical choice for shooters assembling or altering a holster set-up around existing Big Foot hardware.
The WOSPORT AXON wire switch is a wired switching part for the AXON crane laser, supplied in black. It suits players maintaining or building an AXON laser set-up who need the switch and wiring section.
The WOSPORT crane laser switch is a wired control unit that fits an SF-style guide rail, keeping the switching point within reach while the laser stays mounted. Aimed at airsoft players assembling a rail-mounted laser set-up.
A tan switch wire from WOSPORT, intended as a spare part for Crane-type laser units and supplied as an individual component. Aimed at airsoft players who service their own kit and want to swap out a damaged wire.
A black wired switch for Crane-pattern laser units, produced by WOSPORT as part of its switch wire line. Suits airsoft players who are replacing the switching side of an existing laser setup or keeping a spare part to hand.
Tan wire switch unit from WOSPORT, listed under the TAPS range with the Crane Laser SF model reference. It is intended for airsoft users who need this exact switch wire variant and colour.
A pack of three rubber base protectors for M4-style magazines from BIG, finished in tan. Suitable for players who want to cover the magazine base plate and carry a tan set in their kit.
BIG Big Foot base protectors cover the bottom plate of M4-style magazines with a rubber layer, and this pack contains three in black. Suited to players who want their magazine bases covered during skirmishes.
BIG makes this black mount to hold an Apple AirTag on your airsoft gear. A practical pick for players who want their tracker fixed in one place instead of loose in a pocket.
A portable seat from the WOSPORT tactical range, this chair gives airsoft players somewhere to rest during breaks at a site. It suits anyone who wants simple seating they can carry with them and pack away afterwards.
A Multicam-finished table from the WOSPORT tactical range, in its updated 2.0 form. Handy for spreading out gear at the safe zone, at the range or during maintenance at home.
A Multicam-finished table from WOSPORT that gives airsoft players somewhere to lay out magazines and tools on site. A practical pick for anyone who would rather not leave kit on the grass between games.
The WOSPORT Tactical Portable Chair gives airsoft players a Multicam seat for rest periods and waiting time at a site. It suits anyone who wants to avoid sitting on the ground during a game day.
A dump pouch from BIG for collecting used magazines while you play, finished in MultiCam. A straightforward choice for players who want spent magazines kept together and apart from loaded ones.
This tan dump pouch from BIG gives you a dedicated place to stow used magazines while you play. It suits airsoft players building a tan loadout who want quick access to a pouch mid-game.
A black dump pouch from BIG for collecting spent magazines while you play. A sensible pick for airsofters who want a simple place to stash empty mags between reloads.
A Multicam tactical backpack set from BIG, sold under the Big Foot R Assault name. It suits airsoft players who want a bag in the same pattern as the rest of their kit.
A tan tactical backpack set from BIG’s Big Foot range, sold as a complete set rather than a single pack. A practical choice for airsoft players building a tan loadout who want load-carrying kit to match.
The BIG Big Foot – R Assault Tactical Backpack Set gives airsoft players a black, military-styled pack for keeping their gear together. It is supplied as a set for carrying kit to and from skirmishes.
A black medium pouch from BIG, the Big Foot model gives airsoft users a way to group first aid contents separately. It is aimed at those who prefer that equipment to sit apart from the rest of their gear.
A multifunctional tan pouch from BIG, made to hold a hand warmer as part of your kit. Suits players who prefer to keep their essentials organised when temperatures drop.
The Big Foot hand warmer pouch gives cold hands somewhere to recover during a skirmish. A black, multifunctional pouch from BIG that holds a hand warmer on your kit.
Part of the BIG Big Foot range, this tan pouch keeps glow sticks together with quick release tabs for getting at them fast. A practical addition for players building out a night game loadout.
This black BIG pouch gives airsoft players a dedicated place to carry glow sticks, with quick release tabs included on the Big Foot model. It suits those who want their glow sticks kept separately from other kit.
A tan first aid pouch from the BIG Big Foot line, using a quick-release seal so medical items can be reached easily. The second generation Stretch version suits airsoft players who want their medical kit kept apart from other gear.
A black second generation first aid pouch from the BIG Big Foot range, closed with a quick-release seal and supplied in the stretch variant. It suits airsoft players keeping medical kit apart from the rest of their loadout.
The Big Foot is a tan-coloured loading aid for pistol magazines, letting you fill mags with a single hand. It belongs on the belt and suits airsoft pistol users who want their loading kit within reach.
The Big Foot from BIG is a belt-carried aid that lets a pistol be loaded or worked with one hand. It suits airsoft shooters whose other hand is busy with a torch, a barricade or other kit.
A Velcro set from the BIG Big Foot range, made for FAST-style helmets and labelled as the Velcro 2 version. It suits airsoft players who want Velcro components for a FAST helmet from this specific series.
Velcro hook-and-loop part from the BIG Big Foot FAST Helmet Series, intended for FAST-pattern helmet builds. A sensible choice for players kitting out a helmet with patches, pouches or mounts.
A Velcro piece from the BIG Big Foot range, listed for the FAST Helmet Series and filed under helmets. It is aimed at airsoft players who already run a FAST Helmet Series helmet and need this part.
Metal stock mount holder fixator from BIG, intended for M4/AR15 stock mounting positions. A practical part for airsoft users assembling or maintaining the stock area of a compatible rifle.
For Prometheus rotary chambers, this AIRTECH trolley is the TDC element of the hop assembly. It suits technicians replacing that part during a rebuild, or anyone putting together a hop set-up on that chamber.
An internal hop-up trolley from the AIRTECH TDC range, listed for use with the Prometheus Elite Chamber. A practical pick if you are servicing that chamber or gathering parts for a rebuild.
A 1.5-joule spring from HUNTSMAN for airsoft replicas within the Saigo Defense or Lancer Tactical range. It suits users who are comfortable carrying out their own replica maintenance.
A two-rail 20mm external component for MP5-pattern airsoft builds, listed as the ACM BD-0880. It gives users a way to add compatible 20mm accessory mounting points to an MP5 setup.
This compact 7.4V lithium polymer pack from DUEL is rated at 300 mAh with a 35C discharge figure. It suits HPA engine builds that need a small battery to run the electronics.
The DOUBLE M906B electronic trigger unit swaps mechanical contacts for optical sensors, and is intended for the M906B gearbox series. It suits technicians and builders fitting programmable burst or binary trigger control into a compatible AEG.
A rear sight bracket from DOUBLE that gives AK 47 rifles a rail for a scope at the iron sight position. A sensible pick for airsoft players building an AK 47 around an optic mounted over the receiver.
DOUBLE offers a side-mount scope rail for AK47-style airsoft rifles. It suits players who want to mount an optic on an AK47 using the side-mount interface.
DOUBLE lists this as a GBB buckle, a single sling fitting rather than a complete sling set. It is aimed at players who already know how they want a sling run on a GBB platform.
A sling attachment point made by DOUBLE for the Troy GBB rifle. It gives the gun a fixed anchor for a sling so the rifle stays with you hands-free while you move around the site.
A set of replacement metal gears for the AEG gearbox, listed by DOUBLE for M4 and AK rifles. It suits airsofters who handle their own servicing and rebuild work and keep spares to hand.
Spare piston for M4-type AEG gearboxes, offered by DOUBLE as a single internal component. It suits technicians servicing an existing gearbox or piecing a build together from parts.
This plastic gearbox assembly from DOUBLE is a spare internal part for P90 airsoft rifles, useful when an original unit needs replacing or a build is being completed from components. Suited to players doing their own repairs and servicing.
A V3 gearbox casing for AK-pattern airsoft rifles, offered by DOUBLE as a replacement for a worn or broken original. Suited to technicians rebuilding a gearbox who are happy moving the internal parts across.
A Version 2 gearbox shell from Double Bell, offered as an external part for those building or repairing a Ver.2 gearbox. Suited to technicians who need a shell to work from during a rebuild.
Black M4 TTI magazine bottom from DOUBLE, offered as one component. It is intended for airsoft players who need this part for an existing M4 TTI magazine.
For AK-pattern airsoft rifles, the K-44 rear sight from DOUBLE is a steel sight part with a black finish. It suits players building or updating an AK Series rifle who require this 500M sight.
A folding rear sight from DOUBLE with a 600m marking and the M-78 designation. It suits airsoft players who want a back-up iron sight that can be folded away when an optic is fitted.
The DOUBLE Flip-Up Front Sight lets an airsoft rifle keep a front reference ready or drop it out of the way. A sensible pick for anyone switching between open sights and an optic.
A black handguard for the M-104 from DOUBLE, listed as an external part. A straightforward choice for replacing worn front-end furniture or changing the rifle’s appearance on the exterior.
DOUBLE supplies this black free-float RAS handguard as the M-32 variant, finished with a fishbone pattern. It suits airsoft players refreshing the front end of a compatible rifle and fitting accessories to the rail.
This is a single AK grip from DOUBLE, sold as an external part for AK-pattern airsoft rifles. A practical pick if you are repairing, rebuilding or putting together a rifle and need this fitting.
A black M16-pattern battery stock from DOUBLE, giving the rifle’s battery a home inside the stock body. A sensible pick if you are replacing a stock or assembling an M16-style build.
A 150-round STANAG-pattern hi-cap magazine from DOUBLE, listed as the MP-2. It is aimed at players running AEGs that accept STANAG magazines and who want a spare with a larger round count.
A high-capacity G36 magazine from DOUBLE holding 470 rounds, listed as a universal fit. A sensible pick for skirmishers running a G36 platform who want a larger supply between reloads.
The Rebel Tactical Rail Sling Attachment Mount provides a secure sling mounting point for airsoft rifles fitted with standard 20mm Picatinny rails. Its CNC-machined metal alloy construction and steel cross-bolt fastening deliver durability and stability during skirmishes and MilSim games.
Featuring a smooth, rounded attachment loop, this tactical sling mount accommodates HK-style clips, snap hooks, carabiners and paracord, helping prevent sling webbing from fraying during regular use.
The Rebel M-LOK QD Sling Mount provides a secure, low-profile attachment point for tactical slings on compatible airsoft rifle handguards. Its CNC-machined metal alloy construction delivers durability, while the anti-rotation QD socket prevents unwanted swivel movement and twisted sling webbing.
Designed for standard M-LOK rails, this quick-detach sling mount accepts push-button QD swivels and features secure steel mounting hardware for reliable attachment during skirmishes and MilSim games.
The Rebel KeyMod/M-LOK QD Sling Mount provides a secure, low-profile sling attachment point for compatible airsoft rifle handguards. Its CNC-machined metal alloy construction delivers durability, while the anti-rotation QD socket prevents unwanted sling swivel movement during gameplay.
Compatible with KeyMod and M-LOK rail systems, this quick-detach sling mount accepts standard push-button QD swivels, allowing fast sling attachment and removal for improved rifle handling.
The Rebel KeyMod/M-LOK 6 Piece Polymer Rail Set in Black provides versatile accessory mounting for compatible airsoft rifle handguards. Its lightweight, durable polymer construction adds minimal weight while accommodating tactical lights, grips, lasers and cameras.
Featuring six rail sections in various lengths, this KeyMod and M-LOK rail set allows flexible accessory positioning, making it ideal for customising airsoft rifles, carbines and DMR configurations.
The DOUBLE SR25 Mid-Cap Magazine holds 30 rounds and is listed under the M-111 code. It suits skirmishers who carry a set number of rounds and reload from pouches.
This 470-round hi-cap magazine from DOUBLE is made for SR25-pattern airsoft rifles. It gives SR25 users a larger-capacity magazine or a spare to carry into skirmish games.
An 85-round AK magazine from DOUBLE with a metal body, catalogued under the K-61 model number. A practical pick for players who prefer mid-capacity magazines over winding high-caps.
A 90-round mid-cap magazine from DOUBLE, made for SCAR-H rifles. An option for players who prefer a fixed round count and build their play around reloading between contacts.
A 90-round mid-cap magazine for SCAR-H airsoft rifles, carrying the S-09 reference and the DOUBLE name. It is aimed at skirmishers who want spare magazines with a 90-round capacity.
This DOUBLE M14 mid-cap magazine holds 150 rounds and is listed under the M-83 code. It suits M14 users who want a spare magazine with a known round count.
A 440-round hi-cap magazine for M14 airsoft rifles, listed under the DOUBLE brand with the M-7 designation. A sensible spare option for players who would rather carry fewer magazines into longer games.
A 100-round mid-cap magazine from DOUBLE for M16-pattern airsoft rifles, listed with universal fitment and the M-84 designation. It suits players who want a spare magazine with a defined round count for their M16-pattern rifle.
29 users are watching this item:
Double Eagle Submachine M89A AEG Rifle (M89A) BONEYARD
George Mitchell from Leeds purchased
Huntsman 600D Waterproof Shooters Cushion Black
9 minutes ago
Tom Stalker says:
Fantastic service, I bought my first ever AEG the other day and it came within 3 day. The chaps were brilliant help in answering all my questions and guiding me on what would be the best for me.