DOUBLE M4 Hi-Cap Magazine with a 450-round capacity for M4-pattern rifles. A universal-fit spare for skirmishers who would rather carry fewer magazines and spend less time reloading.
The DOUBLE Scar-H magazine is a tan hi-cap unit holding 400 rounds. It suits SCAR-H users who want plenty of ammunition on hand and a colour that matches tan furniture.
A 300-round hi-cap magazine from DOUBLE for M4-pattern AEGs, finished in black with a universal fit. It suits players who want fewer magazine changes and a spare that fits most M4 rifles.
DOUBLE 1911-TH-601 internal springs for 1911 series airsoft pistols, listed as compatible with TM, WE and WA platforms. A practical pick for players who maintain or rebuild their own 1911 pattern pistol.
The BIG Big Foot Heat is an 11.1V lithium polymer pack rated at 1300mAh with a 25C discharge and a Mini-T plug. Its 15 x 45 x 67mm case is worth checking against your replica’s battery space.
A compact BIG Big Foot Heat 1400mAh 11.1V pack, sized 105mm x 20mm x 23mm and fitted with a Mini-T connection. It suits players looking for a replacement or spare battery for a compatible airsoft gun.
The BIG Big Foot Heat is a long, narrow lithium polymer pack rated at 11.1V, 1400mAh and 15C, wired to a Deans plug at 15 x 18 x 171mm. It suits players whose replica has a slim battery channel.
A stick-type 11.1V 1400mAh LiPo from BIG, rated 15C and fitted with a Mini T connector. It suits players checking a 15 x 18 x 171 mm compartment and compatible wiring.
A 7.4V 1400mAh stick pack from BIG, supplied with a Dean connector and measuring 10 x 18 x 171 mm. It is aimed at airsoft users whose battery compartment and wiring suit this long, narrow format.
A 7.4V 350mAh 15C Li-ion pack from BIG with a JST connector, sized 12 x 21 x 40 mm for HPA builds. It suits users matching a specific battery space and connector.
The CR2354 is a 3 volt lithium cell from ACM, listed in the Battery and Charger category. It suits anyone replacing a cell of this model number in a device that specifies a 3 volt lithium battery.
Replacement bolt and cocking lever for GALAXY M82 series rifles, supplied as an internal part. A sensible option when servicing the rifle or rebuilding a worn assembly.
An individual front rail for the ARES L85A3, sold on its own as an external component. A practical pick if you are building up, repairing or keeping spares for an L85A3 rifle.
A replacement spring from ARES, listed under the reference SPRING-15 and rated M170 in the manufacturer’s naming. It suits owners of the spring version who are servicing, rebuilding or repairing their replica and need a fresh spring.
The ARES M160 is a mainspring made for airsoft guns that use the spring version configuration, supplied as part SPRING-14. It suits technicians swapping out a spring during a gearbox rebuild.
A 190mm black silencer from the ARES M16/G39 series, listed under part number SIL-004-S. Suited to players running an M16 or G39 pattern rifle who want to add this muzzle component to their setup.
A Type B flash hider from the ARES Amoeba Mutant range, supplied under code AM-M-FH-002. One for players finishing the front end of a custom build or swapping the muzzle part on a rifle they already run.
A single hook for use with display panels, sold as one piece as part of the BIG Big Foot display stand line. A spare or extra for shops and sites that need one more hanging position.
A single wall-mounted display panel from the BIG Big Foot range, supplied as one piece. It provides a panel for wall-based display and can be used alongside other Big Foot components.
The Big Foot KZ Tactical Plate Carrier from BIG is a grey vest-format carrier for airsoft players building a loadout. It suits those after a plain Urban Grey base that pairs with camouflage or solid-colour uniforms.
A plate carrier from BIG in olive drab, designed to carry armour plates as the core of a tactical loadout. It suits airsoft players building a woodland-toned kit who want torso-focused coverage.
Black plate carrier vest from the BIG Big Foot KZ range, for airsoft players who want a dedicated carrier to build their kit around. A straightforward choice if your loadout runs to dark colours.
A rotating airsoft target from BIG with a double-star face for practice sessions. It suits shooters who want a movable target for drills rather than a fixed design.
An airsoft practice target from BIG, made for shooting training sessions. A sensible choice for players who want a consistent aiming point during practice rather than improvising.
An M-LOK sling mount from BIG with a quick detach connection for removable sling setups. Suitable for airsoft platforms that use M-LOK slots and a compatible quick detach sling fitting.
An LED-illuminated face mask with a cyberpunk theme, made by BIG in the Big Foot design. A good pick for players assembling a futuristic impression who want headgear that stands out on site.
The BIG Big Foot AN/PVS31 is a non-working replica of the binocular night vision unit, made for show rather than function. It fits costume, display and airsoft impression projects where the AN/PVS31 form is wanted.
BIG Big Foot MPU5 Radio Model Case houses the MPU5 radio model and is aimed at walkie-talkie users. A straightforward way to keep that set apart from the rest of your kit on game days.
A tan storage case from the WOSPORT Storm range, sized at 93 x 37cm internally according to the product title. An option for players who would rather carry a long gun and sundries in one container.
A safety case from the WOSPORT Storm line, finished in urban grey, offering 93 x 37cm of internal space. A useful option for players who need to store and carry longer items of airsoft kit.
The WOSPORT Storm Safety Case provides 93 x 37cm of internal space for storing and moving equipment. It suits longer items that will not fit comfortably in a smaller bag.
The BIG Big Foot riser is a tan-finished mount for Picatinny rails, made to raise the height of a scope or similar optic. It suits shooters setting up a scope who need the sight to sit higher above the rail.
The BIG Big Foot Picatinny riser mount is a black T-style riser that raises the height of a scope or optic on a Picatinny rail. It suits shooters who need a higher optic position.
An A Style riser mount from BIG that lifts an optic higher above a Picatinny rail. A practical choice for tan-coloured builds that need extra height beneath the scope.
The BIG Big Foot Picatinny Riser Mount in A Style gives airsoft shooters a way to lift a scope or optic mounting position on a compatible rail. It is supplied in black.
A tan red dot sight from ACM in the LCO style, intended for fitting to carbine-length airsoft rifles. A sensible pick if you want a sight that matches desert-pattern furniture.
A replacement cover for the stock of the FABARM STF12, supplied as an external part. A sensible item to keep for owners whose original cover is worn or damaged, or who want a spare ready for maintenance.
A FABARM external stock part for the STF12, with a retractable design that lets the length be altered. It suits players who want to change the rear fitting on an STF12 build.
A red or green dot reflex sight for carbines and SMGs, the ACM LCO pairs a wide open window with a rotary brightness dial. It suits players after a compact, low-profile optic for close-quarters and fast field play.
Internal steel components for the 5.1 Hi-Capa, catalogued by SP as A-349. Suited to anyone servicing or building a Hi-Capa who wants SP parts for the pistol’s internals.
A steel internal spare component for the R17 Glock series, catalogued by SP as A-430. Aimed at owners and technicians renewing parts during maintenance or a rebuild.
A 7.4V lithium polymer pack from the Duel Code range, rated at 1500mAh with a 25C discharge figure. Aimed at players who want the pack’s ratings clearly stated so they can match it to their setup.
This HPA-fitment M4 adapter belongs to the SAIGO Defense 23 Series and is listed for WE and KJW platforms. It is aimed at airsoft players building or servicing an HPA-fed M4 who need this particular adapter.
A thread conversion piece from HUNTSMAN that takes a Glock’s 11mm muzzle thread up to 14mm. Suits airsoft players who want to run 14mm accessories on an 11mm-barrelled Glock-pattern pistol.
This rear sight is made for the JG 74UN and serves as a replacement when the factory-fitted unit is damaged or missing. A sensible choice for owners carrying out repairs or rebuilding a rifle.
The ELEMENT XT 30mm High Dovetail Mount lifts a 30mm-tube scope above a dovetail rail. It suits builds where the scope needs to sit higher above the receiver.
A dovetail fitting scope mount from ELEMENT that takes 30mm tube optics, supplied in a medium height. Aimed at airsoft players fitting a compatible scope to a dovetail railed rifle.
A replacement gas route valve for the ARMY G39 magazine, intended for servicing or as a standby part. A sensible option for players keeping older magazines running through regular game days.
A spare washer for the recoil spring of the G18C, listed by TOKYO Marui under reference 18C-35. This internal part is the sort of small component to keep spare for servicing and rebuilds.
A replacement hop lever for the G18C, listed under part number 18C-31. It suits airsoft users carrying out internal maintenance who need the correct TOKYO component for the hop-up assembly.
A single replacement selector stopper for the G 18C from TOKYO, supplied under part number 18C-22. A suitable pick for owners servicing or rebuilding the pistol who need one specific internal component.
A piston cup for the G 18C from TOKYO, marked with the 18C-13 part number. It suits owners who need to replace this particular component and want to check the reference before fitting.
An internal cylinder for the TM M1911 from TOKYO, referenced as GM1-17. Suitable for airsoft users undertaking internal work on a TM M1911 who need this listed part.
A small internal component from TOKYO, the knocker lock SP is catalogued under HK45-56 for the Tokyo Marui HK-45. It suits owners doing their own internal work who want to confirm the correct reference before ordering.
Replacement frame listed for the TOKYO G 18C under part number 18C-62. A component-level part for repair or rebuild work, aimed at owners who already know their way around the platform.
A single replacement nocker for the G 18C, listed by part number 18C-53 within the TOKYO parts range. It suits owners repairing their own pistol who need one specific component rather than a full assembly.
A single internal nocker component, catalogued under the TM G17-1 NOCKER G17-23 reference. Suitable for players servicing a G17-23 who need this specific TOKYO part.
A single replacement hop lever for the G17-1, listed by TOKYO under reference G17-12. It suits owners doing their own internal repairs who need to swap out a damaged or worn lever in the hop-up unit.
A single Y ring from the TOKYO internal parts range, catalogued under the TM G17-1 / G17-4 reference. Suited to players servicing their own pistols who want to check the part number against their model’s diagram first.
TOKYO supplies this replacement hop-up chamber for the G17-1, catalogued with the G26-24 reference. It suits technicians repairing a worn hop unit or rebuilding one during a service.
A size S RAGNAR SIGURD H c.Shadow Grey jacket in Black. This model is aimed at airsoft players who need this specific RAGNAR jacket, colour and size for their kit.
The SIGURD Hybrid from RAGNAR is a coyote and black outer layer listed in size XL. It suits players building a Coyote-based kit who want a jacket from the Raids range.
This size L RAGNAR SIGURD Hybrid jacket is the Black c.Coyote version identified in the title. It suits an airsoft player who wants that specific model, colour name and size.
A hybrid jacket from the RAGNAR Raids range, finished in a mix of coyote and black and supplied in size M. Aimed at airsoft players who run coyote-toned kit and want a matching outer layer.
A Coyote and black outer layer in size S, drawn from the Ragnar Raids range. It suits airsoft players building a loadout in those tones who want a jacket that matches the rest of their kit.
This is the RAGNAR SIGURD H jacket in Shadow Grey/Black, listed in size M. It suits airsoft players who want to add this specific model and colourway to their kit.
A tan outer garment from the Ragnar Raids line, offered in size XXL for those who need a larger fit. It suits airsoft players building a loadout around tan or camouflage kit.
The EGIL Jacket from RAGNAR comes in tan and is listed here in size XL. A straightforward choice for airsoft players who want this particular model in that colour and size.
A black XXL jacket from the RAGNAR EGIL line, part of the Ragnar Raids collection. It suits airsoft players who want a dark outer layer to wear alongside the rest of their black kit.
The EGIL Jacket from RAGNAR comes in black in size XL, listed as a single jacket. A sensible pick for airsoft players who want a plain dark outer layer to match their existing kit.
A tan beanie from RAGNAR, offered in one universal size. It suits players after a simple hat that sits well with tan airsoft kit.
14 users are watching this item:
JG - D90 SMG - AEG with Inbuilt Box magazine & M4 Magazine (Black)
James Carter from Nottingham purchased
Huntsman 600D Waterproof Shooters Cushion Camo
18 minutes ago
Jack Downing says:
Absolutely incredible customer service from these. Dave was wonderful and was very quick to resolve a minor issue I had with my online order. Delivery was also swift and the products are well packaged so there’s no worries about anything arriving damaged. Super chuffed with what I’ve received from Defcon.