-

Airsoft Batteries (161)
-

Airsoft Grenade Launchers (73)
-

Airsoft Grenades (118)
-

Upgrades & Parts (1063)
-

Airsoft Chargers & Accessories (35)
-

Replica Knives (10)
-

Scopes, Sights & Red Dots (223)
-

Silencers & Flash Hiders (201)
-

Slings & Sling Mounts (61)
-

Tactical Torches & Lasers (77)
-

Other Accessories (448)
-

Airsoft Magazines (972)
-

Gift Ideas (139)
-

£5.99In stock
A dual-vent smoke grenade from ENOLA that burns for roughly 20 seconds, emitting dense pink smoke from both ends at once. Pull-cord ignition means no separate lighting equipment is needed, making it a practical choice for photography, reveals and skirmish use.
-

£5.99In stock
The ENOLA Twin Vent II is a blue smoke grenade that vents from both ends, so a wide screen builds quickly. A practical choice for airsoft players, paintball teams and film crews wanting rapid smoke without a lighter.
-

£5.99In stock
ENOLA Twin Vent II TWV40Y is a cardboard-cased smoke grenade that pushes yellow smoke out of both ends, emptying in about 20 seconds. It suits airsoft players wanting a quick screen, plus paintball and photography use.
-

£8.99In stock
A green smoke grenade from ENOLA with a Wire Pull ring ignition system. It suits airsoft players, paintball teams and scenario organisers who need to obscure sightlines or mark positions outdoors.
-

£8.99In stock
The EG18 from ENOLA is a wire-pull smoke grenade that produces a dense black screen once the ring is pulled. It suits airsoft and MILSIM players who need to obscure movement or mark a position outdoors.
-

£8.99In stock
A cylindrical smoke grenade from ENOLA with a wire-pull friction igniter, producing orange smoke for outdoor screening and marking. It is intended for airsoft skirmishers, training scenarios and effects work.
-

£8.99In stock
A wire-pull smoke grenade from ENOLA that burns for around 90 seconds, giving off pink smoke with no open flame. Suited to airsoft players, MILSIM groups and outdoor photography.
-

£5.99In stock
The ENOLA twin vent design releases yellow smoke from both ends at once, with a burn of roughly 20 seconds. Pull-ring ignition and a cardboard body suit airsoft players and film work.
-

£5.99In stock
A single-vent wire-pull smoke grenade from ENOLA that puts out blue smoke for around 90 seconds. It suits players who want a straightforward, flame-free way to mark positions or screen movement on site.
-

£24.99In stock
A HUNTSMAN waterproof 600D polyester cushion filled with synthetic beans, supplied in Olive Drab with a webbed carry loop. It gives seated airgun shooters and field marksmen a portable rest and ground barrier.
-

£24.99In stock
The HUNTSMAN 600D Waterproof Shooters Cushion is a camo field seat that doubles as a rifle rest, with a 600-denier waterproof polyester shell and synthetic fill that moulds to shape. It suits hunters and target shooters on damp ground.
-

£24.99In stock
A black field cushion from HUNTSMAN with a 600-denier waterproof polyester shell and lightweight foam bean filling. It doubles as a positional rest for rifles and suits shooters who need compact, movable seating on wet or rough ground.
-

£15.60In stock
A small WE spare for the SMG8, covering position 81 in the bolt carrier and recoil guide assembly. It suits owners servicing their own rifle or replacing a lost or worn recoil spring guide stopper or bolt screw.
-

£7.80In stock
The #71 loading nozzle retaining pin, also listed as the valve stopper pin, is a WE spare component for the SMG8. It suits owners carrying out their own repairs or replacing a mislaid pin during servicing.
-

£3.99In stock
A trigger block safety lever for E&C AEG rifles on the M4 / M16 platform with a version 2 gearbox. Suits players and technicians carrying out maintenance, repairs or a fresh build.
-

£24.99In stock
The WG10 1.5J loading nozzle and NPAS unit come together as a single set for WELL PRO MCX XM5 and XM7 rifles, with MWS-compatible fitment. A practical pickup for servicing or piecing together an MWS-based build.
-

£24.99In stock
A side-folding stock from WELL with a 1913 Picatinny attachment point, supplied in black. It suits airsoft rifles and setups that use a Picatinny interface and want a folding stock option.
-

£4.99In stock
A metal ambidextrous magazine release assembly for M4/AR-15 pattern airsoft rifles, listed in black under CYMA part number F376. Suits players replacing a worn catch or technicians building up a receiver.
-

£3.99In stock
A servicing kit for APS Real Action Marker platforms, supplied with disassembly keys, valve tools and maintenance hardware in hardened carbon tool steel with composite handles. The factory manual and diagrams suit armourers, trade workshops and rental operators maintaining markers.
-

£9.99In stock
A multi-pack of replacement O-rings for the APS 88g CO2 Smart Charger, produced in industrial NBR. It is aimed at workshop repairs, rental fleet upkeep and retail parts stock for APS CAM870 charging systems.
-

£6.99In stock
A 60° firm hop-up bucking from LAYLAX for standard Marui-spec AEG chambers and barrels, with extended sealing lips and a single-mound contact patch. Suited to mid-to-high velocity builds running mid-weight or heavy BBs.
-

£14.99In stock
Replacement buffer tube retaining ring in machined carbon steel from LAYLAX, made for Tokyo Marui Next Gen Recoil Shock M4 and AR-15 builds. Fits standard castle nut wrenches, so it suits anyone rebuilding a recoil-shock lower.
-

£9.99In stock
A thread adapter from LAYLAX that lets Tokyo Marui Mk23 owners fit 14mm CCW accessories. Suits skirmishers wanting to add a suppressor, barrel extension or tracer unit to the pistol.
-

£12.99In stock
The LAYLAX Anti-Wobble Frame Lock Pin is an expanding front pin for TM-spec M4 and AR-15 metal receivers, tightened by hex key. It suits players wanting a rigid frame and steadier optic mounting.
-

£5.99In stock
A replacement mainspring from LAYLAX for Tokyo Marui NGRS rifles, using variable-pitch coil spacing and oil-tempered steel wire. It suits players wanting consistent velocity with reduced load on the motor and gears.
-

£22.99In stock
This LAYLAX steel plate replaces the standard buffer tube collar fit on Tokyo Marui NGRS M4 rifles and adds an ambidextrous loop for clip and hook slings. It suits players setting up single-point or multi-point carry on an NGRS build.
-

£29.99In stock
A reinforced piston from LAYLAX for Tokyo Marui NGRS New Version 2 gearboxes, pairing a polymer body with heat-treated steel rack teeth. It suits players servicing recoil-shock M4 or HK416 builds who need a drop-in piston for stressed setups.
-

£13.99In stock
A LAYLAX conversion lead that lets a Tokyo Marui EVOLT M4A1 run on Deans / T-Plug LiPo packs of 7.4V or 11.1V. Suits players and workshops wanting to use their existing battery collection with an EVOLT platform.
-

£27.99In stock
A replacement compression nozzle for Tokyo Marui NGRS M4 and HK416 rifles, made by LAYLAX in POM with an internal O-ring. It is aimed at players servicing an original cylinder head or completing an upgraded NGRS build.
-

£4.99In stock
The LAYLAX pin retention kit is made for Tokyo Marui HK416D NGRS rifles, holding the trigger group with machined aluminium links and steel pins. It suits those wanting a drop-in reinforcement part supplied with fixing screws and hex fasteners.
-

£49.99In stock
A three-gear transmission set for Tokyo Marui NGRS gearboxes, supplied by LAYLAX as sector, spur and bevel components. It suits upgraded Recoil Shock builds that run heavier springs and need a 20:1 torque ratio with CNC-machined steel construction.
-

£1.99In stock
A 14mm CCW muzzle adaptor for WINGUN gas and CO2 pistols, moulded in ABS polymer. It lets you mount suppressors, tracer units and mock flash hiders on muzzles without an external thread.
-

£29.99In stock
This LANCER mini reflex optic clamps to 20mm Picatinny rails and sits low on pistols and compact rifles. Suited to players assembling a lightweight CQB loadout.
-

£14.99In stock
A five-way balance board from ACM links several lithium packs to one charger, covering 2S 7.4V and 3S 11.1V batteries. It suits airsoft players and field technicians preparing multiple LiPo, Li-ion or LiFe packs before a game.
-

£5.99In stock
The DELTA two-point sling holds a rifle across the shoulder and chest using nylon webbing and polymer hooks. A pull loop lets the length be altered while it is worn, suiting airsoft players who move between carrying and shooting.
-

£19.99In stock
The TOKYO optic base for EU Series gas blowback pistols holds a micro red dot above the slide without adding weight to it. Suits players building a competition or target sidearm who want blowback cycling left unaffected.
-

£159.99In stock
The Kobra EKP-1S-03 from JJ is a replica collimator sight that clamps to an AK side rail with a quick-detach lever. Selectable reticle patterns, adjustable brightness and a wide window suit close-range skirmishing.
-

£49.99In stock
A compact airsoft sight from JJ for pistols and small carbines, using a red dot reticle with brightness control. It fixes to 20mm Picatinny or Weaver rails and includes elevation and windage adjustment.
-

£8.99In stock
The ACTION hop adjustment wheel is a polymer rotary dial that regulates bucking tension on the AAP-01 and AAP-01C. A useful spare for players and technicians servicing these gas blowback pistols.
-

£14.99In stock
This cast metal alloy trigger is a direct-fit spare for the MAXTACT Derringer gas non-blowback pistol, supplied in polished silver plating. Suited to workshops and players replacing a worn fire control part.
-

£14.99In stock
A replacement fire control part for the MAXTACT Derringer double-barrel gas NBB pistol. Cast in high-density metal alloy with a matte black finish, it suits armourers and owners handling repairs.
-

£14.99In stock
Gold-plated trigger unit for the MAXTACT Derringer NBB gas pistol, made to factory specification in cast metal alloy. A drop-in spare for technicians and repair shops servicing single-action examples of the platform.
-

£99.99In stock
This LANCER suppressor houses the E-Shooter Smoky BT Tracer module, flashing LEDs as 6mm tracer BBs pass through and lighting the BB path. Bluetooth app control covers RGB colours, rate of fire and diagnostics.
-

£79.99In stock
EMG builds this muzzle device around a licensed Strike Industries linear compensator, with tracer illumination and a simulated flame effect in one unit. It suits players wanting a low-profile front end with selectable output modes.
-

£59.99In stock
The EMG linear compensator muzzle device has tracer electronics built in, switching between tracer light, a simulated muzzle flash, or both. It suits players wanting tracer effects and a tidy front end without a separate unit.
-

£32.99In stock
This G&G piston is designed for the L85 and belongs to the SNC reinforced series. It suits airsoft users carrying out repair or build work who need that specific component.
-

£24.99In stock
A six-shell speedloader for airsoft revolvers from ARES, moulded in lightweight high-impact polymer with a plunger release that seats all six shells at once. A useful addition for skirmish players and rental sites running revolver loadouts.
-

£15.99In stock
The ACM 7.4V 1300mAh LiPo pack is a compact lithium-polymer battery for AEGs with tight compartments. Its 30C continuous and 60C burst rating suits compact builds and custom projects.
-

£18.99In stock
For the Tokyo Marui M4A1 MWS gas blowback rifle, the LAYLAX floating valve uses an enlarged inlet and O-ring sealing. It suits players tuning gas flow, velocity consistency and blowback response.
-

£8.99In stock
A replacement internal seal from LAYLAX First Factory for Tokyo Marui M4A1 MWS gas blowback magazines. It fits at the outlet where propellant leaves the magazine on its way towards the bolt.
-

£11.99In stock
A hard-grade hop-up bucking from LAYLAX for Tokyo Marui-spec gas blowback pistols and VSR-10 rifles. Suited to upgraded, high-power builds that need a stable contact patch and a consistent chamber seal.
-

£18.99In stock
The DUEL 11.1v 1450mAh LiPo is a three-cell pack with a 25C continuous discharge rating, aimed at upgraded AEGs that need stronger current delivery. It has a T-Dean connector and low-resistance wiring in a compact shape for tight compartments.
-

£19.99In stock
This slim 9.6v pack from DUEL uses Ni-MH cells and carries a 1600mAh capacity, with a Mini Tamiya connector for AEG wiring. It suits players who need a narrow stick battery for a stock tube, handguard or confined receiver space.
-

£5.99In stock
The CYMA 7mm Gearbox Bushings set contains six steel alloy parts for AEG gearboxes that accept 7mm bushings. It suits technicians servicing upgraded, high-velocity or high-ROF builds.
-

£3.99In stock
A&K open steel bushings with an 8mm outer diameter and 3mm inner diameter, sized for AEG gearbox shells. A workshop part for technicians building high-stress setups with heavy springs.
-

£5.99In stock
A genuine KWC internal metal replacement part for gas airsoft and airgun platforms. Aimed at workshop technicians, armourers and retailers who need factory-compatible selector hardware for repairs.
-

£59.99In stock
The S005 mock suppressor from SALVO gives Flat Dark Earth and two-tone rifles a finished muzzle look. Built in CNC-machined aluminium with a matte Tan anodised coating, it fits compatible modular handguards and takes longer inner barrels.
-

£64.99In stock
A Tan-finished DOUBLE mock silencer for Double Eagle platforms, fitted with an internal UV LED tracer to light green tracer BBs. It suits night-game players and earth-tone builds.
-

£64.99In stock
The DOUBLE G101SD is a mock suppressor with an internal tracer module for green tracer BBs. It suits players wanting low-light projectile visibility and a USB-rechargeable muzzle accessory.
-

£24.99In stock
A non-tracer barrel shroud in Tan for DOUBLE G101SD builds, machined from aluminium alloy with a matte anodised finish. It is aimed at airsoft players and armourers dressing Double Eagle tactical rifles or fitting extended inner barrels.
-

£3.99In stock
A V2 magazine-well mounting stand from HUNTSMAN that keeps handguns upright for showcases, retail shelves and workshop benches. It suits collectors and airsoft users who want an orderly way to present or maintain their pistols.
-

£3.99In stock
The V1 handgun base from HUNTSMAN holds an airsoft pistol upright on its magazine well for display or bench work. A sensible pick for players, collectors and shops wanting tidy, scratch-free storage.
-

£6.99In stock
A HUNTSMAN mock suppressor for airsoft pistols and compact rifles, made to screw onto standard muzzle threads. It suits players who want to run a longer inner barrel while keeping front-end weight low.
-

£2.99In stock
A replacement loading nozzle from HUNTSMAN for compatible pistol-series gas blowback handguns. It suits players and technicians carrying out routine servicing or replacing a damaged nozzle.
-

£2.99In stock
A 12mm loading nozzle in impact-resistant polymer for HUNTSMAN Pistol Series gas blowback pistols. Suits players carrying out routine maintenance, building a pistol or replacing a worn nozzle before a game.
-

£2.99In stock
HUNTSMAN Tactical Series pistol sights provide a notch-and-post aiming reference for airsoft handguns. A practical fit for players who want to change the sighting setup on a compatible slide.
-

£14.99In stock
A rechargeable pack and matching wall charger supplied together as one set. It suits DOUBLE M83 series owners who want a spare or replacement power supply without sourcing the parts separately.
-

£29.99In stock
A two-part gearbox shell set for the ARES M45 AEG platform, made up of GB-505 and GB-506. Aimed at technicians carrying out repair or rebuild work on the M45 gearbox.
-

£34.99In stock
This 430mm tight-bore barrel from ARES uses a 6.03mm bore and a polished copper/brass alloy core to keep air pressure consistent behind each BB. Suited to VSR-10, Amoeba Striker and long-barrel AEG builds.
-

£89.00In stock
The Mini Gun Shroud from CLASSIC is an external component for the front end of a mini gun build. It suits players repairing or altering an existing project.
-

£7.99In stock
Replacement O-rings for WELL PRO WG10 CO2 gas blowback magazines, covering the inner and outer seating rings at the capsule inlet and rear outlet valves. Aimed at owners servicing their own magazines on this platform.
-

£7.99In stock
A silicone seal set for WELL PRO WG10 gas magazines, with green and white O-rings for the inlet and outlet valves. It is aimed at airsoft technicians who need to service a leaking magazine or refresh worn seals.
Gas, Batteries, Chargers, Scopes, Sights, Silencers, Torches, Paint, Chronos & Cameras
The airsoft gun accessories collection from Defcon Airsoft enhances your airsoft experience. Add a tactical advantage to your airsoft guns with scopes, sights, lasers. Mount 40mm grenade launchers for tactical advantage using non-lethal smoke and gas options. Increase stealth capabilities by adding silencers, flash hiders and camo to your airsoft guns.
You can customise your airsoft gun by adding airsoft attachments like scopes, sights, lasers, grenade launchers, silencers, and flash hiders. These airsoft attachments allow you to enhance the performance, tactics, and enjoyment of airsoft.
With the right accessories, you can gain a tactical edge, increase stealth and accuracy. Airsoft gun accessories let you customise your weapon and gear for any type of scenario or mission.
Gas blowback pistols and magazines provide a realistic action and recoil. Use Green Gas for consistency in temperature. CO2 powered for cold weather games. Red gas for extra power. Extended battery life comes from LiPo or NiMH batteries. Rapidly recharge between games with smart chargers, USB plug-ins or wall chargers.
Maintenance tools like specialty oils, silicon spray and cleaning kits properly maintain airsoft rifles and pistols for optimal performance. Capture photos and videos on the airsoft battlefield with rail, helmet and body mounts for cameras and phones. Review footage to improve skills and strategy.
The complete selection of airsoft accessories and upgrades from Defcon Airsoft enhances the airsoft experience and allows customisation for any play style or scenario. All airsofters, from beginner to expert, can add tactics and stealth for next level immersive military simulation.
- Tactical Accessories: Add tactical rails, scopes, sights, lasers to Airsoft rifles for increased stealth and accuracy. Achieve enhanced performance through upgraded components.
- Gas Powered: Gas blowback pistols provide realistic action. Use gas magazines for reliable power. Green gas, red gas, CO2 provide consistency.
- Grenade Launchers: Mount 40mm grenade launchers for tactical advantage. Pinpoint smoke and gas grenades for distraction and stealth.
- Batteries and Chargers: Get extended battery life from LiPo or NiMH batteries. Rapidly charge via smart chargers, USB, or wall plug-ins. Multiple battery sizes.
- Silencers and Flash Hiders: Add silencers and flash hiders to reduce noise and muzzle flash for stealth. Quick detach models allow customisation.
- Gear and Protection: Use gear like tactical vests, slings and hard case transport for organisation. Protect lenses with mesh masks. Stay safe.
- Maintenance Tools: Properly maintain airsoft guns with specialty oils, silicon spray, cleaning kits. Ensure optimal performance and accuracy.
- Cameras and Photography: Capture photos and videos with rail, helmet and body mounts. Review footage to improve skills and strategy. Share best moments.
Gas, Batteries, Chargers, Scopes, Sights, Silencers, Torches, Paint, Chronos & Cameras
The airsoft gun accessories collection from Defcon Airsoft enhances your airsoft experience. Add a tactical advantage to your airsoft guns with scopes, sights, lasers. Mount 40mm grenade launchers for tactical advantage using non-lethal smoke and gas options. Increase stealth capabilities by adding silencers, flash hiders and camo to your airsoft guns.
You can customise your airsoft gun by adding airsoft attachments like scopes, sights, lasers, grenade launchers, silencers, and flash hiders. These airsoft attachments allow you to enhance the performance, tactics, and enjoyment of airsoft.
With the right accessories, you can gain a tactical edge, increase stealth and accuracy. Airsoft gun accessories let you customise your weapon and gear for any type of scenario or mission.
Gas blowback pistols and magazines provide a realistic action and recoil. Use Green Gas for consistency in temperature. CO2 powered for cold weather games. Red gas for extra power. Extended battery life comes from LiPo or NiMH batteries. Rapidly recharge between games with smart chargers, USB plug-ins or wall chargers.
Maintenance tools like specialty oils, silicon spray and cleaning kits properly maintain airsoft rifles and pistols for optimal performance. Capture photos and videos on the airsoft battlefield with rail, helmet and body mounts for cameras and phones. Review footage to improve skills and strategy.
The complete selection of airsoft accessories and upgrades from Defcon Airsoft enhances the airsoft experience and allows customisation for any play style or scenario. All airsofters, from beginner to expert, can add tactics and stealth for next level immersive military simulation.
- Tactical Accessories: Add tactical rails, scopes, sights, lasers to Airsoft rifles for increased stealth and accuracy. Achieve enhanced performance through upgraded components.
- Gas Powered: Gas blowback pistols provide realistic action. Use gas magazines for reliable power. Green gas, red gas, CO2 provide consistency.
- Grenade Launchers: Mount 40mm grenade launchers for tactical advantage. Pinpoint smoke and gas grenades for distraction and stealth.
- Batteries and Chargers: Get extended battery life from LiPo or NiMH batteries. Rapidly charge via smart chargers, USB, or wall plug-ins. Multiple battery sizes.
- Silencers and Flash Hiders: Add silencers and flash hiders to reduce noise and muzzle flash for stealth. Quick detach models allow customisation.
- Gear and Protection: Use gear like tactical vests, slings and hard case transport for organisation. Protect lenses with mesh masks. Stay safe.
- Maintenance Tools: Properly maintain airsoft guns with specialty oils, silicon spray, cleaning kits. Ensure optimal performance and accuracy.
- Cameras and Photography: Capture photos and videos with rail, helmet and body mounts. Review footage to improve skills and strategy. Share best moments.