Airtech Studios is a leading provider of airsoft upgrades and parts for both commercial and consumer markets. They supply components to major manufacturers like G&G Armament, ASG, Krytac, and many others.
For Prometheus rotary chambers, this AIRTECH trolley is the TDC element of the hop assembly. It suits technicians replacing that part during a rebuild, or anyone putting together a hop set-up on that chamber.
An internal hop-up trolley from the AIRTECH TDC range, listed for use with the Prometheus Elite Chamber. A practical pick if you are servicing that chamber or gathering parts for a rebuild.
This AIRTECH TDC bracket converter is for the VFC and Proforce Virtus MCX rotary arm. It suits airsofters and technicians working with RHOP, flat-hop or Maple Leaf Macaron hop setups.
This AIRTECH hop-up arm is made for Wolverine MTW chambers and is listed in Stock and Phoenix fitments. It suits players and technicians rebuilding an MTW who need to match the arm to their chamber and body variant.
This brass hop ring is an internal hop-up part from AIRTECH, intended for the Krytac P90. It suits players who service their own hop unit rather than sending the rifle out.
The AIRTECH brass ring is an internal hop-up component for AK47-pattern AEGs, listed for universal AK47 models. It suits players replacing or servicing parts inside their rifle’s hop-up unit who want to confirm fit for their platform first.
This AIRTECH rotary unit is made for Retro Arms hop-up chambers, with a design that puts hop pressure on the centre line. Suits players servicing or rebuilding that chamber.
These spring spacers from AIRTECH are an internal part for AEG rifles, allowing FPS adjustment on supported platforms. They suit KRYTAC, VFC and ASG builds and are intended for players or technicians tuning an existing gearbox.
This internal spacer from AIRTECH lets you alter spring preload in Tokyo Marui spec AEG gearboxes to change power output. A practical choice for technicians carrying out fine tuning during a build or a service.
AIRTECH TDC Hop-up Converter changes the standard hop arrangement in ICS metal rotary chambers to a top-down-centre adjustment that presses the nub down from above. A job for anyone rebuilding or tuning the hop-up internals of an ICS replica.
The AIRTECH top dead centre trolley and M-nub pair is for Retroarms hop-up chambers and R-hop builds. It suits airsoft players servicing or assembling a Retroarms chamber who need the correct internal parts.
This internal component from AIRTECH is the Maxx TDC Trolley, intended for the tensioner in the Maxx Hopup Chamber. It suits airsoft technicians and players who are servicing or rebuilding that hop-up assembly.
This AIRTECH TDC trolley and M-nub set is sized at 6mm for Maxx hop-up chambers. It suits players servicing or rebuilding their chamber who want both parts supplied together.
For the Ares Amoeba AM-014, AIRTECH supplies the IBS Inner Barrel Stabilizer as an internal component. It is intended for airsoft users choosing a model-specific part for this platform.
This internal stabilising component comes from AIRTECH and is listed for the Ares Amoeba AM-013’s barrel section. It suits players or technicians who are already stripping and rebuilding the internals of that specific model.
A trigger converter from AIRTECH, made for the G&G SSG-1 long trigger and introduced as a 2022 release. It is aimed at players who need this specific external part for their SSG-1 build.
A speed trigger converter from AIRTECH, listed for the G&G ARP9 and for all CM16 and TR16 G2 rifles. It suits owners of those G&G platforms who are working on the trigger group and want a named compatible part.
A model-specific battery extension unit for the KRYTAC TRIDENT MK-II M PDW, supplied in the new PDW version. Suits owners of that replica who need the AIRTECH BEU matched to their rifle.
This AIRTECH part is the BEU unit listed for the CS CXP-MARS PDW9. It suits owners of that platform who are after the matching extension component from the AIRTECH range.
The BEU battery extension unit from AIRTECH is a black fitment for the VFC Avalon PDW series, giving the battery compartment more room. It suits PDW owners who need to house a pack in the extended space.
An internal hop component set from AIRTECH: a TDC trolley with a matched M-nub, intended for the Maxx Hop-up Chamber. Suits those assembling an R-Hop or Flat-hop patch who need a flat contact face.
This AIRTECH barrel stabilizer is listed for the G&G CM16 GC16 Predator as an internal component within the IBS range. It is intended for players and technicians working on this specific G&G rifle.
An internal barrel support from AIRTECH, made for the G&G CM16 Firehawk. A practical buy for anyone already stripping that AEG for servicing or a barrel swap.
The AIRTECH IBS™ inner barrel stabilizer is an internal component made for the G&G CM16 SRS in its 7-inch form. It suits technicians servicing the barrel assembly or finishing an internal build.
An internal stabiliser for the G&G SMC-9, produced by AIRTECH as part of its IBS line. It is intended for SMC-9 owners who need this particular component for servicing or rebuild work.
The AIRTECH butt extension is an external add-on for G&G ARP9 and 556 series rifles running GOS-V5 stocks. It fits to the outside of the stock and alters the length of the butt section.
This AIRTECH adapter lets an Odin M12 sidewinder feed a broader selection of mid-cap magazines without swapping between dedicated fittings. It suits players who load several magazine types from one speedloader.
A two-tone patch from AIRTECH in a six-sided format, part of the Studio Patch line. It suits airsoft players who want a distinct shape and a red-on-black look on their kit.
The Battery Extension Unit from AIRTECH is a model-specific part for the Krytac Trident MKII PDW and Alpha SDP. It suits owners of either rifle who need a battery component made for that platform.
A fitting set from Airtech Studio for AEG gearbox installation, listed for V2 through V9 versions. A practical addition to the bench for technicians and players who assemble or rebuild gearbox units.
The AIRTECH EHU is an internal hop up unit catalogued for the ASG Scorpion Evo 3 A1. It suits technicians servicing or upgrading the hop up assembly on that particular replica.
An AIRTECH patch from the Evo line, intended for personalising airsoft clothing and gear. A sensible choice for players who want a branded accent on their loadout or a way to tell teams apart.
AIRTECH supplies this stainless steel stabilising component for the Scorpion Evo 3 A1 buttstock. It suits owners who want to firm up the rear stock assembly with a straightforward fitting part.
Red and black patch from the AIRTECH Studio range, made for airsoft players who want to add branding or identification to their equipment. A straightforward way to finish off a loadout or refresh a piece of kit.
The AIRTECH AAR Accessory Rail set adds two tan 20mm rails to the AM-013 and AM-014, running the handguard’s length to meet the upper receiver rail. Suited to players wanting more mounting space for optics or add-ons.
Two 20mm rails from AIRTECH that extend the mounting space along the AM-014 handguard and meet the upper receiver rail. A practical fit for players wanting to add optics or other accessories to their Honeybadger.
The AIRTECH AAR Accessory Rail is a long tan Nylon-polymer rail for the AM-013 and AM-014, running along the handguard to meet the receiver rail. It suits players wanting more mounting space for accessories or larger scopes.
This tan battery extension unit from AIRTECH fits the Ares Amoeba AM-013, AM-014 and AM-015 and opens up the compartment to take larger packs. A straightforward upgrade for players tired of small batteries running out mid-game.
The Airtech Studios Advanced M4 Arm and M-nub provide superior performance for M4 airsoft guns. This product features a TDC design, allowing for an easy drop-in installation. Users benefit from even distribution of force across the entire surface, which optimises accuracy during gameplay.
Airtech Studios offers the Advanced R-Hop Arm and M-Nub specifically designed for the KWA Hop-up Chamber Series. This product features a TDC design that allows for an easy drop-in installation, making it highly user-friendly.