Inner barrel measuring 416mm from the LAYLAX Prometheus EG line, listed for the Krytac SPR with a 6.03mm bore. Intended for players rebuilding an SPR who need to match length and bore to their setup.
The LAYLAX Prometheus EG Barrel is a 6.03mm internal barrel measuring 387.5mm, listed for the Krytac LVOA-C. It suits airsoft players replacing a worn barrel or assembling a compatible LVOA-C build.
A 310mm barrel with a 6.03mm bore, produced by LAYLAX within its Prometheus EG range and specified to fit the Krytac LVOA-S. It suits players servicing or rebuilding the internals of that rifle.
A 280mm Prometheus inner barrel from LAYLAX, listed for the Krytac LMG CRB with a 6.03mm bore. It suits players replacing the internal barrel on that platform.
An internal barrel component from LAYLAX for the Krytac PDW, listed with a 6.03mm bore and 155mm length. It suits airsoft users who are replacing or specifying the barrel in this replica and have checked the required dimensions.
A 260mm LAYLAX barrel with a 6.03mm bore, made for the G&G CM16SRl and sold as an internal part. Aimed at CM16SRl owners who are happy to strip the rifle for internal work.
A 205mm inner barrel from the LAYLAX Prometheus EG line, listed for the G&G CM16SRS with a 6.03mm bore. It suits airsoft users checking a replacement barrel against their rifle’s existing dimensions.
An inner barrel measuring 120mm with a 6.03mm bore, produced by LAYLAX within the Prometheus EG range for the G&G ARP9 and ARP556. A sensible pick for players swapping the barrel in either replica during internal work.
This 120mm barrel from the LAYLAX Prometheus EG range has a 6.03mm bore and is listed for the G&G Firehawk. It is aimed at players maintaining or rebuilding that specific rifle.
This LAYLAX internal barrel is made for the M14 Exclusive and measures 500mm with a 6.03mm bore. It suits players building or maintaining an M14 Exclusive who need this specific barrel length and bore.
A Prometheus EG Barrel from LAYLAX for G3 and SG-1 airsoft rifles, with a length of 469mm and a bore of 6.03mm. It suits players replacing a tired barrel or building a rifle around these dimensions.
A 460mm internal barrel for the AK74MN from the LAYLAX Prometheus line, with a 6.03mm bore. It suits players and technicians sourcing a replacement component by the listed model, bore and length.
A 455mm Prometheus EG barrel from LAYLAX, listed for the AK47S with a 6.03mm bore. It suits airsoft users building or maintaining an AK47S who need an internal barrel in this length and bore size.
A 433mm inner barrel for the Type89 and VSR-10, part of the LAYLAX Prometheus EG line and bored to 6.03mm. It is aimed at players replacing the barrel inside one of those rifles.
A 407mm, 6.03mm barrel option from the LAYLAX Prometheus EG range, listed for M4A1, S16 and SG551+ rifles. It is aimed at airsoft users selecting an internal part for those platforms.
A 380mm inner barrel with a 6.03mm bore, made by LAYLAX for the PTS Masada. Suited to players carrying out internal work on that rifle rather than drop-in external upgrades.
This 363mm inner barrel from LAYLAX has a 6.03mm bore and is listed for Sopmod, M4A1, SR16 and SG551 rifles. A sensible pick for players refreshing the internals of one of those platforms.
This internal barrel is intended for the PTS Masada platform, with a 6.03mm bore and 318mm length. It suits airsoft players building or maintaining a Masada who want a LAYLAX Prometheus EG component.
A 300mm Prometheus EG barrel from LAYLAX with a 6.03mm bore, intended as an internal part for AA12, Scar, HK417 and M733 builds. It suits airsoft players checking compatibility before replacing a barrel.
A 285mm inner barrel with a 6.03mm bore from the LAYLAX Prometheus range, listed for CQB-R and MC51 rifles. Suits players replacing the original barrel in a compatible AEG build.
A 260mm replacement inner barrel for the AK74U, made by Laylax within its Prometheus EG line and bored to 6.03mm. Suited to players rebuilding or refreshing an AK74U who want a known bore and length.
A LAYLAX Prometheus EG Barrel with a 6.03mm bore and 247mm length, intended for G36C, P90, CAR15 and SIG552 replicas. It is an internal part for players replacing the barrel in a compatible build.
A replacement inner barrel from the LAYLAX Prometheus EG range, sized at 6.03mm and 208mm long. Aimed at airsoft players servicing or rebuilding an M4PMC who want a barrel of these exact dimensions.
A 141mm internal barrel for the MP5PDW, offered in the LAYLAX Prometheus EG range with a 6.03mm bore. It suits airsofters replacing a barrel or specifying a build by bore size and length.
GOLDEN M240 Bipod Parts (M2-53) supply spares for the rifle’s bipod as individual replacement pieces. A practical pick for owners servicing their own replica or restocking a technician’s spares box.
The GOLDEN M240 Bravo gear set is catalogued under the M-87 code and supplied as an internal part. It suits technicians carrying out repairs or rebuilds on the platform.
The MO-1 long-type motor from ARES is an electric motor for AEGs built around that format. It is aimed at replacing a worn unit or completing a new build that takes this motor size.
A HXAP 12 gas router for the HX magazine platform, listed under the ARMORER name. It suits airsoft users who need this specific magazine part and have confirmed the code.
Replacement nozzle housing from ARMY for the G17 GEN 4 gas blowback pistol, listed as part A-156. A small internal component for players who service and rebuild their own blowback units.
This A-50 nozzle from ARMY is an internal component intended for the G17 GEN 4, with the part code shown in its title. It is aimed at airsoft users who need this specific nozzle for their existing replica.
ARMY rear sight for the G17 GEN 4 pistol, sold under the A-205 part reference. A sensible pick for anyone servicing their G17 GEN 4 who needs to match an existing part number.
The SECUTOR Gas Expansion Chamber is an internal gas-path component for airsoft replicas. It suits players who carry out their own teardown, repair and rebuild work with their own tools.
A replacement GOLDEN gearbox unit for the G39 platform, supplied as an internal part for repair, rebuild or spare-parts use. Aimed at airsoft technicians and players confident working inside the receiver.
The #E-014 hop-up bucking from KWA is an internal replacement component for the hop-up assembly, listed under catalogue reference SP-KWA-199-9999-E014. It suits players rebuilding or servicing a hop-up unit who need the KWA part.
This ARES item combines an Amoeba laser unit with a fitting for the M-Lok system, referenced as ML-ACC-008. It is aimed at airsoft players using M-Lok-compatible furniture who want to add a laser component to their kit.
A torch and mounting set for airsoft rifles that use the M-Lok system, letting you add a light to the handguard. Supplied as part ML-ACC-007 within the ARES Amoeba accessories line.
An M-Lok mount from the ARES Amoeba line for carrying a light or laser on a slotted handguard. Suits players kitting out an Amoeba build who need an attachment point for a lamp or aiming unit.
An M-Lok mounting accessory from the ARES Amoeba line, supplied as the Type C variant under code ML-ACC-003. Suits players who already use M-Lok handguards and want to add a supporting component to their setup.
A tan carbine conversion kit from BIG, listed for 17, 18 and 19 series pistols. Suited to players who want to run a 17/18/19 pattern pistol in a carbine layout.
A textured lower frame section for the APS ACP, supplied in black under code AC008s. An external part for those assembling or renewing an ACP who prefer a stippled finish on the frame.
The MAPLE 70 degree hop-up rubber arrives with a separate hop tensioner in the same pack. A sensible pick for players building or refreshing a firmer hop setup.
The MAPLE Hop Up Chamber Set is a hop up chamber assembly for GHK AK gas blowback rifles, supplied as a set of components. It suits players servicing, repairing or rebuilding the hop unit on an AK GBB.
This 80 degree hop bucking from MAPLE is part of the AUTOBOT line and is listed for VSR and GBB series replicas. It suits airsoft users carrying out internal replacement work who have confirmed the required fitment.
The AUTOBOT hop bucking from MAPLE is an internal hop-up rubber supplied in a 75° grade. It is aimed at players who service their own hop-up units and want a replacement component from the AUTOBOT line.
An internal racking block for the RAPTOR Carbine Kit, offered in the Real Steel version. Aimed at owners replacing that component in a kit they already run.
This replacement base pin is the long version, catalogued by STARK under code VGC0MAG0B0 and part reference 91. A sensible spare for anyone servicing their own magazines at home.
A small internal component for airsoft magazines, catalogued by STARK as the Magazine base I (89) under code VGC0MAG080. One for players maintaining their own magazines who check part numbers against the item they need.
Keep an S17/18 platform’s follower assembly serviceable with this STARK spring, listed under part VGC0SPG013 and diagram reference 81. It is aimed at airsoft users doing internal maintenance or repair work where that component is required.
A replacement magazine catch from STARK, catalogued under reference VGC0LRV0C1 and supplied as an internal part. Worth keeping as a spare if you service your own airsoft rifle and want the correct reference on hand.
A trigger pin from STARK, listed under part number VGC0TGD030 with the (52) reference. A useful spare for anyone servicing their own trigger assembly at home.
A conversion kit from SLONG that lets a 17/18/19 series pistol be run in carbine form. Finished in tan, it suits players who want a long-arm set-up from a pistol they already own.
The BOLT ST5 Stock Tube Butt Plate replaces the rear plate on the ST5 stock tube. A sensible pick if yours is worn or missing and you want to keep the original stock setup in service.
A single replacement grip screw for the BOLT BR45. One to keep in the workshop spares box in case an original is lost, damaged or worn during servicing or reassembly.
A single bolt catch part for the BOLT BR29, identified by its BR29 (Bolt Catch) reference. Suitable for users who already know the BR29 catch component they need.
A replacement spring from GUARDER, catalogued as an internal part and marked with the SP70 designation. Suited to airsofters and technicians who carry out their own work inside the replica.
This wiring adaptor from EMERSONGEAR links a pre-Dean LiPo battery connection to a USB connection. It is supplied as an internal part for builds where those two connector types need to be joined.
The XCORTECH X3300W is a tracer-equipped mock suppressor with an integrated sensor for velocity, rate of fire and BB counting, plus a PEQ-style wireless display. It suits players wanting live data on their AEG and battery.
This numbered spare trigger from GHK is intended for the G5 platform, replacing the existing trigger when it is worn or damaged. It is a straightforward component for owners who already know which part they need.
An oil temper wire spring from GUARDER, marked M180 and catalogued as model M-180 within the APS Series. Suited to airsofters building or servicing a gearbox who need to match a spring rating to their existing setup.
This GUARDER item is a replacement switch assembly intended for AK-47 builds and ordered using the GE-07-29 reference. It suits hobbyists and technicians who already strip and service their own gearboxes.
A trigger switch assembly made by GUARDER for the AK-47S, listed as GE-07-28. It suits players repairing an AK-pattern AEG or technicians building one up from internal components.
A switch assembly for the handguard, produced by GUARDER under part number GE-07-20. Suits players and technicians who need to swap out this component while keeping the rest of their handguard setup in place.
A polycarbonate tappet plate from GUARDER, made for Version 3 gearboxes in the Tokyo Marui style and marked with the code GE-06-03. Suits technicians refreshing the internals of a Version 3 build.
A polycarbonate tappet from GUARDER, made for the TM Version 2 gearbox and identified by part number GE-06-02. It suits airsoft technicians servicing or rebuilding a compatible Version 2 gearbox who need this internal replacement part.
GUARDER steel bushings for gearbox internals, supplied six to a bag under code GE-05-01. Aimed at technicians refreshing a build or keeping spares at the bench.
An internal gearbox piston from GUARDER, moulded in polycarbonate and supplied in the Economic Version. It is intended for the TM AEG series and carries the part reference GE-04-05 for identification.
A polycarbonate piston from GUARDER, catalogued for Tokyo Marui AEG series gearboxes and identified by part reference GE-04-04. It suits players and technicians replacing a worn component during a gearbox rebuild.
A steel high speed gear set for TM AEG version II and III gearboxes, supplied as GUARDER part GE-02-06. Aimed at experienced technicians carrying out an internal gearbox rebuild.
Replacement gearing for version II and III Tokyo Marui AEG gearboxes, sold under the GUARDER Infinite Torque-Up banner as part GE-02-05. A sensible pick for a gearbox refresh or repair where a named part is preferred.
A gear set in steel, catalogued by GUARDER as GE-02-01 and intended for TM AEG II/III builds of the Original Type. It suits airsoft technicians servicing a gun that takes this configuration.
The MAPLE VSR loading latch is an internal component for airsoft rifles built on that platform. It is aimed at owners and technicians carrying out maintenance or a rebuild who need this particular part.
28 users are watching this item:
VFC Maxim Defence MD9-K GBB Sub-Machine Gun
William Foster from London purchased
Big Foot Power Digital Battery Capacity Checker
44 minutes ago
Tom Stalker says:
Fantastic service, I bought my first ever AEG the other day and it came within 3 day. The chaps were brilliant help in answering all my questions and guiding me on what would be the best for me.