ESD High Stability Flute Valve
£8.99In stock
A flute valve from the ESD internal parts range, intended for airsoft replicas that use this component type. Suited to players and technicians replacing internals during maintenance or a rebuild.

In stock
A flute valve from the ESD internal parts range, intended for airsoft replicas that use this component type. Suited to players and technicians replacing internals during maintenance or a rebuild.

In stock
A five-piece pack of replacement valve springs from MAPLE for gas blowback magazines. Suited to players and technicians who service their own magazines and prefer to keep spares to hand.

In stock
MAPLE steel sear components that fit inside the trigger mechanism of VSR-pattern rifles, produced on CNC machinery to a reinforced specification. A workshop fit for DT-M40, DSR40 and VSR owners overhauling that assembly.

In stock
A 91 mm internal component from the MAPLE Crazy Jet line, listed for the M&P9 and PX4 pistols. Suited to players and technicians servicing or rebuilding either of these models.

In stock
An internal component for the G19, G23, PPQ and M84 pistols, listed in the 84mm size. Aimed at players servicing one of those replicas who need this specific MAPLE part.

In stock
An internal steel component from MAPLE, sold as part 61 for the WE XDM. Aimed at owners working from a parts diagram who already know the reference they require.

In stock
This MAPLE internal component is listed under the F-Key designation for players sourcing replacement parts. It suits those carrying out their own repairs who need to match an existing item.

In stock
This cylinder head is a MAPLE internal upgrade for VSR-pattern bolt-action sniper rifles, sold as a replacement for the factory-fitted part. It suits players rebuilding a rifle’s compression assembly or a technician handling the build.

In stock
A MAPLE cylinder set for VSR-series airsoft sniper rifles, comprising an M145 spring, a 45-degree piston and an aluminium spring guide. Aimed at players rebuilding that assembly or changing spring and piston together.

In stock
A replacement hop-up adjustment lever from the MAPLE VSR Series, intended for VSR-10 pattern rifles. Suits players and technicians repairing or rebuilding the hop-up assembly inside the rifle.

In stock
A hop-up adjustment wheel for gas-powered M1911, MEU, HI-CAPA and P226 pistols. This MAPLE part is aimed at owners replacing the wheel inside the hop-up unit.

In stock
The MAPLE VSR Series Cylinder comes with an M145 spring, a 45 degree piston and a zero friction spring guide in one set. It suits VSR-pattern rifles being rebuilt or refreshed by someone comfortable working inside the cylinder.

In stock
This MAPLE bundle provides a hop-up chamber, a 6.02 mm 113 mm inner barrel and an Autobot 60-degree bucking for the 4.3-inch 1911 gas blowback pistol. It suits players refreshing the barrel assembly of a 4.3″ 1911 GBB.

In stock
A replacement lip seal for the H45 magazine, supplied as an individual spare part. A small part for TOKYO H45 owners who service their own magazines.

In stock
A hi-capacity AK magazine in Tan from BATTLEAXE, holding 500 rounds. The waffle-pattern B18 suits AK users who want plenty of rounds from one magazine without carrying a set of spares.

In stock
BATTLEAXE 70-round mid-cap magazine for AUG rifles, marked with the model code B34B. A sensible pick for AUG users who prefer spring-fed magazines and a realistic reload routine.

In stock
A BATTLEAXE mid-cap magazine for MP5 platforms, with a stated 70-round capacity and the B23B model code. It suits airsoft players who want another magazine for an MP5 loadout.

In stock
This BATTLEAXE metal magazine holds 70 rounds and fits M16 and M4 type rifles, supplied in black under reference B618B. A practical pick for players who like to reload between contacts rather than carry a large capacity.

In stock
A nickel-metal hydride battery from TOKYO with an 8.4v rating and 1300mAh capacity, intended for SOPMOD setups. It is aimed at users who need a spare or replacement pack in that specification.

In stock
A BOLT external part for the B36 platform, this grip dust cover is aimed at owners who need this particular component for their own setup. Check the BOLT B36 fitment before ordering.

In stock
This full metal hop-up chamber from JG is made for M4-pattern rifles and replaces the original unit during repair or rebuild work. It suits players and technicians who are comfortable stripping the barrel assembly.

In stock
A replacement spur gear for airsoft gearboxes, catalogued by BOLT as the Enhanced Type and identified by part number M4GB15. Suited to players and technicians rebuilding a gear train who need this specific internal component.

In stock
An internal tune-up spring from GUARDER for TokyoMarui AEG gearboxes, with the PSG-1 excluded. It is suited to airsoft technicians and players carrying out their own spring changes or servicing work.

In stock
A GUARDER SP160 tune-up spring for TokyoMarui A.E.G. builds, supplied as a 14 g internal component. It suits airsoft technicians servicing compatible AEGs but is not intended for the PSG-1.

In stock
Replacement AEG main spring from GUARDER, made from oil quenched and tempered silicon-chrome alloy steel wire and listed at 14 g. Suits Tokyo Marui electric rifles, but not the PSG-1.

In stock
GUARDER produces this SP100 tune-up spring for Tokyo Marui electric guns, using Si-Cr alloy steel wire. It suits technicians servicing compatible AEGs; the PSG-1 is excluded.

In stock
A GUARDER replacement selector plate for Tokyo Marui G3 AEG rifles, made from copper and anti-heat plastic and rated to 200 degrees Celsius internally. A service part for anyone refurbishing a G3 gearbox.

In stock
A stainless steel cylinder head from GUARDER, manufactured to Tokyo Marui’s original specification. It suits Version 7 gearboxes such as the Marui M14 and is aimed at players replacing internal components.

In stock
A version 6 gearbox cylinder head from GUARDER, produced in S303 stainless steel and built to the original Tokyo Marui specification. It suits airsoft technicians working on version 6 gearbox rebuilds or repairs.

In stock
For Tokyo Marui-pattern AEGs with a version 3 gearbox, this cylinder head from GUARDER is produced in S303 stainless steel. It weighs 34g, and the AUG is excluded from the stated fitment.

In stock
A GUARDER S303 stainless steel cylinder head is intended for Version 2 AEG gearboxes built to Tokyo Marui original specification. It suits airsoft technicians replacing this internal component in a compatible gearbox, and the listed weight is 34 g.

In stock
The GUARDER GE-04-03 is a 12 g polycarbonate piston head with a ventilated face and a bearing. It suits technicians and experienced players working on AEG gearbox internals.

In stock
A replacement air cylinder for Marui MP5K and PDW series replicas, supplied as GUARDER part GE-03-04. It suits players and technicians who are servicing the internal air system and need to renew this component.

In stock
A short-axis motor from GUARDER for MARUI and TOP AEG platforms, built around an aluminium axis bushing, two internal ball bearing bushings and a thermally treated pinion gear. Suits players wanting a faster cycle from their gearbox.

In stock
A long type high speed motor from GUARDER for MARUI and TOP AEGs, quoted at 40000 rpm. It suits builds running SP85 to SP110 springs with 8.4 V to 10.8 V batteries.

In stock
A long type motor for airsoft internal use, the GUARDER Infinite Torque-Up GE-01-10 weighs 250 g and carries thermal treatment. It suits users who need an aluminium axis bushing and two ball bearing bushings.

In stock
FUSE supplies this fuse and wire set for the A&K M249, M60 and PKM. A useful spare for anyone who services their own replica and wants the internal wiring covered.

In stock
A rechargeable NiMH pack from WE, rated at 8.4V nominal with a stated 3300mAh capacity and a 153mm length in a 3×2+1 layout. It suits players whose replica has a compartment sized for it.

In stock
A steel flash hider from ANGRY in the WCRS COMP Model A pattern, threaded clockwise for fitting to a replica’s outer barrel. A sensible pick for players finishing a build or refreshing a damaged front end.

In stock
A steel muzzle accessory for airsoft builds, this ANGRY flash hider uses CW threading and the WCRS COMP Model B profile. Suited to players refreshing a replica who need a clockwise-threaded fitment.

In stock
Spare feed lips for the WE MP-69 magazine, the part that keeps BBs held at the top of the mag. A practical pick for anyone servicing a magazine whose lips are worn or damaged.

In stock
A fire selector gear set for the WE SCAR, intended for assembly servicing and repair. Aimed at airsoft users who maintain their own rifles or have repairs carried out by a technician.

In stock
Spare magazine feed lips for the WE SCAR GBBR, identified as part 132. They suit owners carrying out maintenance or replacing worn feed lips on their magazine.

In stock
This WE M9 air nozzle set contains the nozzle plus the related internal parts. It is aimed at owners doing repair or servicing work who need the right component for their model.

In stock
This air nozzle unit for the WE Sigg 556 comes with its internal parts included. It suits airsoft users carrying out repair work on the nozzle section of their rifle.

In stock
A replacement cylinder for M4-platform airsoft guns, carrying the SRC part number SP-SRC-SM4-8. It suits owners who need to check or change this internal component and is described as fitting most M4 models.

In stock
An upper receiver section for the SRC XR8, sold on its own as an external part. A practical pick for XR8 owners who want to swap out or refresh the upper half of their rifle.

In stock
A blue AK grip from SRC, listed as an external part for airsoft rifles built around this grip style. It suits players who need to replace the grip or add a blue part to a compatible AK rifle.

In stock
Spare feed lips for SRC SR92 magazines, the part that holds BBs at the top of the mag and releases them towards the hop unit. A straightforward replacement for anyone whose magazine has started to misfeed.

In stock
This is a MAPLE internal hop-up bucking in the Diamond specification, with a 50-degree rating and listing for VSR and GBB variants. It suits airsoft players maintaining a hop-up assembly who need this exact part.

In stock
The MAPLE Diamond hop up bucking is an internal replacement component for airsoft guns running the KSC/KWA variant hop up unit. Listed at 75 degrees, it suits players servicing or rebuilding their hop up assembly.

In stock
An internal hop-up bucking from MAPLE in the 80 Degrees variant, intended for VSR, L96 and GBB fitments. It suits airsoft users and technicians servicing compatible hop-up units who need this specific Delta option.

In stock
The Delta hop up bucking from MAPLE is a 75-degree internal part for VSR and GBB variants. It suits players servicing their own hop up unit who check fitment first.

In stock
MAPLE supplies the Delta hop-up rubber in a 70 degree rating, with VSR and GBB versions listed separately. It is intended for players replacing a worn rubber or building up a hop unit.

In stock
An internal hop-up bucking from MAPLE, offered in VSR and GBB fittings and rated at 60 degrees. Aimed at players replacing a worn bucking or assembling a hop-up unit from scratch.

In stock
The MAPLE Monster/Diamond hop-up bucking has a 75-degree rating and is intended for AEG variants. It is aimed at airsoft players who require this internal part when working on a suitable AEG hop-up setup.

In stock
An 80-degree Monster/Diamond hop-up bucking from MAPLE, intended for AEG variants. It is an internal component for airsoft players checking fitment and specification before ordering.

In stock
A 75 degree hop-up bucking from MAPLE, intended for the Monster AEG. MAPLE states that the rubber used is highly elastic and anti-wear, so it is aimed at airsoft players replacing the bucking inside their hop chamber.

In stock
A 70 degree hop-up bucking from MAPLE in the Monster/Diamond pattern, offered for VSR and GBB fitments. Aimed at players renewing internal parts during a hop-up rebuild.

In stock
A MAPLE Monster/Diamond hop-up bucking rated at 80 degrees, listed in VSR and GBB options. It is intended for airsoft users choosing an internal part for a build that requires one of those variants.

In stock
Small replacement O-ring from MAD for the fire pin on a gas cartridge, listed at 1.5 x 4 mm and supplied on its own. It suits owners who service their own gas components and need to renew a worn seal.

In stock
Spare front fire pin O-ring for gas cartridge assemblies from MAD, listed at 1 x 5 mm. A small internal part worth keeping for servicing and repairs when the existing seal needs replacing.

In stock
This MAD replacement O ring seals the gas cartridge and measures 1.5 x 15.5 mm. A handy spare for players who strip and service their own gas equipment.

In stock
A replacement gas cartridge seal from MAD, listed as 2 x 15 mm and supplied as two rings. A practical spare for players servicing their own gas-powered airsoft guns.

In stock
Replacement feed lips for the KWC-117 magazine, the internal part that retains the top round at the magazine mouth. A sensible spare for anyone servicing their own KWC magazines when feeding becomes inconsistent.

In stock
An internal spare part from KWC: replacement feed lips for the KWC-093 magazine, keeping BBs held at the top. A sensible option for players servicing their own magazines or chasing inconsistent feeding.

In stock
These KWC replacement feed lips fit the KWC-123 magazine and retain BBs at the magazine mouth. A practical spare for servicing a worn or damaged magazine.

In stock
This black inner barrel is a replacement component for the KWA M11A1 submachine gun, listed under part number 0105-0021. It suits owners servicing or repairing their replica who need to swap out the existing barrel.

In stock
This internal gearbox assembly is made for the JG G36 platform and carries the SP-JG-003 reference. It is aimed at experienced airsoft users and technicians undertaking repair or upkeep on a suitable rifle.

In stock
A steel bolt handle from GUARDER, made for the TYPE96 (NEW Type) rifle. It weighs 148g and is listed as an external part for owners of that specific model.

In stock
A 9mm GUARDER spring guide for the Type 96, made from S303 stainless steel and 6061 aluminium alloy. It weighs 20g and is aimed at players replacing internal parts who want a defined material specification.

In stock
An internal spring guide from GUARDER, sized at 7 mm and built from S303 stainless steel with 6061 aluminium alloy, weighing 14 g. Suitable for technicians servicing or rebuilding the Type 96 platform.

17 users are watching this item:
Nuprol PMC Medium Zipped Utility Pouch - NP Camo

Daniel Lawson from Liverpool purchased
Big Foot Power Digital Battery Capacity Checker
51 minutes ago

Jack Downing says:
Absolutely incredible customer service from these. Dave was wonderful and was very quick to resolve a minor issue I had with my online order. Delivery was also swift and the products are well packaged so there’s no worries about anything arriving damaged. Super chuffed with what I’ve received from Defcon.

Enjoy FREE SHIPPING
on all orders over £200