As one of the original pioneers of Far East airsoft guns, Cyma is a producer that has been active in the airsoft industry for a very long time. Cyma first launched in the late 1990s with a focus on low-cost weapons and toys, but in the years that followed, they boosted both the quality and number of lines they created and now produce some fantastic arisoft replicas, especially AKs, MP5s and Electric Pistols (AEPs).
In stock
A short rail-fitting bipod from CYMA for M24 and M4 airsoft rifles, supplied in black as the HY-202 variant. It suits players who want a support accessory for prone or supported shooting.
In stock
The CYMA M24/M4 bipod, long version, arrives with a rail fitting and black finish. It is aimed at airsoft players wanting a forward rest point when shooting from a static position.
In stock
A pack of 32 black rail covers from CYMA, supplied as the XTM-1 set under code HY-205. A simple external part for players who want to change the look of a railed handguard without replacing it.
In stock
CYMA XTM-2 rail covers supplied as a 32-piece set in black, part code HY-206. A practical pick for finishing a railed handguard or restocking spares for more than one build.
In stock
A trigger-circuit component for the M14, this CYMA part arrives with its cabling already joined to the base. Suited to experienced home technicians replacing the original in their own rifle.
In stock
A metal hop-up chamber made for the CYMA SVD Standard, arriving together with its hop rubber. Suited to anyone servicing or rebuilding the rifle who needs to renew the hop assembly.
In stock
CYMA supplies this plastic hop-up in the standard G39 specification under the HY112 reference. A sensible pick for anyone refurbishing a G39 or restocking spares for servicing work.
In stock
The CYMA M005 hop-up is an internal component for M4/M16 pattern airsoft rifles, intended for servicing or rebuilding the hop-up area. It suits players and technicians who need this specific part for a compatible build.
In stock
A replacement electronic trigger unit for CYMA MP5 and SWAT series AEGs, fitting in place of the original contact assembly. Suited to technicians and players carrying out repairs or upgrades who want contact protection and more consistent current flow.
In stock
This CYMA replacement motor drives the auto-winding mechanism inside motorised drum and box magazines. A spare part for technicians servicing high-capacity magazines that have slowed or stopped feeding.
In stock
A spare Mosfet and ETU board for CYMA Platinum and EMG Daniel Defense CM.1050DL BK rifles. It suits technicians repairing Version 2 rear-wired gearboxes or servicing Eshooter-equipped platforms.
In stock
A replacement MOSFET component intended for the Cyma Platinum Swat SMG5 AEG, catalogued under the CM041L designation. SPARE supplies it as an internal part for owners carrying out their own repairs.
In stock
A semi-only internal component from the CYMA CGS Series parts range. It is aimed at CGS Series owners who are carrying out maintenance or assembling a semi-only setup.
In stock
This gas magazine is built for M4 rifles in the CYMA CGS Series and gives players on that platform an extra feeding option. It is the QD Tube version, supplied as one magazine.
In stock
This gear set is a spare internal part for replicas in the CYMA CM030 line, for swapping out the gears during a gearbox rebuild. It suits players who service their own equipment or leave the work to a technician.
In stock
A charging unit from CYMA for automatic electric pistol batteries, offered in UK plug form and supplied without an adapter. It suits players who want a spare or replacement charger covering several AEP makes.
In stock
A black slide from TOP, intended for the Cyma CM125 USP full metal pistol and supplied as an external replacement part. It suits owners of that model who need to swap out the slide or keep a spare to hand.
In stock
A full metal top slide in black, produced by TOP for the Cyma CM122 and CM226. A practical pick for anyone replacing the upper slide on either pistol during a repair or rebuild.
In stock
This TOP item is a black top slide component for the Cyma CM121, catalogued as SP-CYMA-002-BLACK. It suits airsoft users and technicians looking for this listed external part.
In stock
A 500-round hi-capa magazine for AK Series rifles, styled in the Tapco Waffle pattern and marked with the C228 reference. CYMA supplies this magazine for players seeking a high-capacity reload option for AK platforms.
In stock
The CYMA CM030 Series AEP Drum Magazine holds 100 rounds, with the battery built into the drum and a Type C specification. It suits owners of CM030-series automatic electric pistols looking to add a drum magazine.
In stock
A high-capacity 460-round magazine for AK-series airsoft rifles, produced under the CYMA C228 reference with Tapco styling. A sensible pick for skirmishers who would rather carry fewer magazines into a game.
In stock
This CYMA 370-round M094 magazine is built from polymer for M4 Series airsoft rifles. It is aimed at players seeking a high-capacity magazine for compatible M4 platforms.
In stock
This polymer hi-cap magazine holds 450 rounds and is listed for AK Series rifles, with a black finish and the CYMA model code C106. A practical pick for players who want fewer magazine changes during a skirmish.
In stock
A polymer high-capacity magazine from CYMA for the AK Series, listed at 450 rounds and supplied in a smoke finish. Suits players who would rather carry more rounds than reload often.
In stock
A 180-round mid-cap magazine from the CYMA RPK Style Series, supplied in black under the C90 reference. It suits players putting together or maintaining an RPK-style CYMA loadout.
In stock
A tan 550-round hi-cap magazine for AK series airsoft rifles, in the Bulgarian Waffle style. CYMA identifies this C42 variant for players seeking a high-capacity AK magazine.
In stock
A 550-round magazine for AK-series airsoft rifles, supplied in black with Bulgarian Waffle styling. It provides CYMA users with a spare hi-cap magazine for skirmishes and range sessions.
In stock
This CYMA dual magazine for AK-series airsoft rifles holds 1100 rounds and uses the sound control system, marked as the C14C variant. It suits players wanting fewer reloads and a paired magazine setup on a compatible rifle.
In stock
A 1500-round box magazine from CYMA, listed under product code C218. A sensible choice for players who would rather run one large magazine than carry a pouch full of smaller ones.
In stock
The CYMA C95 holds 120 rounds and fits SVD-pattern sniper rifles, supplied as one magazine. A practical choice for skirmishers who want a spare close to hand during a game.
In stock
A 36-round magazine for the CYMA CM128 Hi-Capa AEP, listed under the CYMA-C139 part number. It suits players who want to carry reloads or keep a spare for their pistol.
In stock
Thirty-round magazine for the CYMA CM700 M40A3, supplied under the C110 part reference. It suits skirmishers who prefer a restricted ammo load and regular magazine changes.
In stock
The CYMA CM043 Galil Hi-Cap Magazine holds 430 rounds and is listed under the C74 reference. It gives CM043 Galil owners a spare or replacement magazine for their kit.
In stock
This C63-referenced magazine from CYMA holds 32 rounds and is listed for the CM121 in a short format. It suits airsoft players who are checking a specific model and capacity before they buy.
In stock
Twenty-round magazine intended for the CYMA L96 CM703 series of rifles. A sensible pick for anyone who wants a second magazine on hand for a skirmish day.
In stock
A 20-round magazine for the CYMA M24 CM702 series, offered as a spare or replacement item. It suits owners of that rifle series who want extra magazines or a replacement for their current one.
In stock
A 70-round low-capacity magazine made for D90-pattern airsoft rifles and marked with the CYMA part reference MAG-C121. An option for players who like a limited round count and a disciplined reload.
In stock
A large-capacity hand-wound magazine for the CYMA G39, holding 450 rounds and tensioned by hand as you play. A sensible choice for skirmishers who would rather not carry a loader or several spare magazines.
In stock
Spare 130-round magazine for the CYMA G39, built with a metal shell and a mid-cap internal design that needs no winding. A sensible pick for players who want a few magazines ready rather than one reload.
In stock
A 110-round winding magazine intended for the CYMA CM023 (DM). It suits airsoft players who want spare magazines or a replacement for the CM023 (DM).
In stock
A 30-round short magazine for the CYMA CM125, listed under the C98 reference. A sensible pick for players who want a second magazine of the same type for game days.
In stock
Carrying 80 rounds, this mid-capacity magazine is made by CYMA for SVD-pattern rifles. It suits players who would rather swap magazines than top up a single one during skirmishes or milsim games.
In stock
This CYMA drum magazine carries 1000 rounds in one unit, so you spend less time swapping magazines during a game. It suits players who want that capacity on hand for longer skirmishes.
In stock
A 400-round M14 magazine from CYMA, built in metal and marked with the C28 reference. A sensible pick for players who want a spare or replacement magazine for their rifle.
In stock
A hundred-round long magazine from CYMA, identified by the C27 code and forming part of the CM030 line. A practical item to keep as a spare for skirmish days.
In stock
A 30BB short-pattern magazine from CYMA, identified by the C26 reference and MAG-C26-122 code. It suits airsoft players looking for a spare magazine in the same short configuration for the CM122.
In stock
A 30-round short magazine from CYMA for the CM122 and CM030, marked with the C26 code. It suits owners of either model who want a smaller magazine carrying fewer rounds.
In stock
A compact electric airsoft rifle from the CYMA Platinum range, built in the short AKS74U style and finished in black. It comes with an Eshooter ETU GEN-2 trigger unit already fitted, suiting players who prefer a shorter AK-pattern platform.
In stock
An electric-powered AK74 platform from the Platinum range, finished in black and shipped with the Eshooter ETU GEN-2 trigger unit already installed. Pick this CYMA rifle if you want a tactical AK74 for skirmish use — model CM113A.
In stock
An electric AKM-pattern airsoft rifle from the CYMA Platinum line, offered in black as the CM113. The Eshooter ETU GEN-2 trigger unit is included, so this variant is aimed at players wanting that electronics package in an AKM-format AEG.
In stock
A black CM002-GEN2 AEG from CYMA with a full-metal receiver and quad-rail RIS handguard. Its barrel extension pieces allow short or long layouts, which suits players covering tight and larger game areas.
In stock
This black CYMA AEG carbine pairs a billet-style aluminium receiver with an MLOK handguard and folding sights. It suits players who want a short, compact platform for close-quarters airsoft games.
In stock
The CYMA Platinum Rapid Strike is a short-format AEG built around a machined aluminium body and MLOK forend. It is aimed at players who need a CQB-ready SMG with a TM-compatible V2 gearbox and MOSFET.
In stock
The CM518 from CYMA is a blue-finished rifle in the company’s SAI-styled range. It suits airsoft players after a long gun as the basis of a skirmish kit.
In stock
The CM623 from CYMA is a blue M4-pattern airsoft rifle with a nylon fibre build, an M-Lok handguard interface, a MOSFET and a quick-change spring. A battery and charger are included in the box.
In stock
A blue-finished M870-pattern airsoft shotgun from CYMA’s CM355 range. It suits players who want a distinctive blue shotgun with a tactical model name and a recognisable profile.
In stock
The CYMA CM352M is a compact tri-shot shotgun with a short barrel, a three-burst firing option and blue tactical furniture. It suits airsoft players who want a shotgun-format replica for close-quarters play.
In stock
The CM357 from CYMA is a compact pump-action shotgun wearing a blue colourway and a Magpull-style sliding fore-end. It is aimed at players who want a short shotgun with a bit of visual character in their loadout.
In stock
A CYMA Sports Line AEG in the M4 style, supplied with a long RIS handguard for mounting rail accessories. A sensible pick for skirmishers who want a blue-finished M4 platform with room up front.
In stock
The CM513 from CYMA is an electric-powered M4 rifle whose silencer is built into the front end rather than threaded on separately. It suits players who prefer the moderated profile to be part of the rifle itself.
In stock
A compact M4-pattern electric rifle from the CYMA Sports Line, finished in blue and built around a shortened front end. It suits players who want a shorter AEG body style for their set-up.
In stock
The CM070 from CYMA is a metal-bodied M4 AEG with a silencer integrated into the front end and a V2 gearbox running at a stated 330 FPS. A sensible pick for skirmishers wanting a longer, heavier M4 rifle.
In stock
A CYMA Sports Line AEG, the CM516 has M4 URX styling and a black finish. It suits airsoft players wanting an electric M4-pattern rifle in black.
In stock
The CYMA CM355 is a black airsoft shotgun built in the M870 Operator style, part of the brand’s tactical range. It suits players looking for a shotgun-format replica to add to their kit.
In stock
A tan CYMA shotgun in the CM355 configuration, forming part of the Tactical M870 Operator line. It is intended for airsoft users after this particular model and colour, who will confirm the package contents regarding sights.
In stock
A compact electric rifle from CYMA, supplied with a 300-round high-capacity magazine and fitted with a RIS forend. It suits players looking for a short M4-pattern AEG for close-quarters sites.
In stock
The CM518 from CYMA is an airsoft rifle with SAI-style externals, sold under the reference CYMA-CM518. It is aimed at skirmish players who want a rifle with a more individual look than a standard finish.
In stock
This CYMA rifle follows the SVD pattern and comes with metal and wood externals across its full-length body. It suits players building a DMR-style or impression rig who prefer a long platform to a compact carbine.
In stock
An electric M4-platform rifle from CYMA where the suppressor forms part of the front end rather than a bolt-on extra. A straightforward choice for skirmishers who want the suppressed look without fitting parts themselves.
In stock
An AK-pattern airsoft rifle from CYMA with genuine wood furniture and a metal body. Well suited to skirmishers after the classic AK look in a rifle that can be used regularly.
In stock
This compact pump-action shotgun from CYMA fires three BBs at once from three separate inner barrels. It suits players after a metal-bodied breaching gun for close-quarters sites.
