-

£24.99In stock
A six-shell speedloader for airsoft revolvers from ARES, moulded in lightweight high-impact polymer with a plunger release that seats all six shells at once. A useful addition for skirmish players and rental sites running revolver loadouts.
-

£29.99In stock
A two-part gearbox shell set for the ARES M45 AEG platform, made up of GB-505 and GB-506. Aimed at technicians carrying out repair or rebuild work on the M45 gearbox.
-

£34.99In stock
This 430mm tight-bore barrel from ARES uses a 6.03mm bore and a polished copper/brass alloy core to keep air pressure consistent behind each BB. Suited to VSR-10, Amoeba Striker and long-barrel AEG builds.
-

£11.99In stock
A single replacement sear for the ARES 308 Series, listed under part number UB-194. A useful spare to keep on the bench if you service your own trigger mechanism.
-

£24.99In stock
A nozzle part for the ARES HPA Engine (HEB-001), sold as a single internal component. It is aimed at people maintaining or repairing an existing HEB-001 engine.
-

£8.99In stock
An internal hop-up assembly for rifles in the ARES 308 line-up, supplied as a replacement for the factory-fitted part. A sensible choice when rebuilding a 308 Series replica or dealing with a worn original.
-

£16.99In stock
A replacement external cover for the AR308 buttstock, catalogued by ARES as a spare part. Suitable for airsoft skirmishers and gun technicians who are servicing an AR308 and require the cover piece alone.
-

£16.99In stock
A replacement hop rubber from the ARES spare parts range, listed for the AR-308 GB-2. A sensible item to hold if you maintain your own rifle and want to refresh the hop component during a rebuild.
-

£32.99In stock
A replacement inner barrel supplied by ARES for the AR-308, categorised as an internal part. It is intended for players who service their own rifles and need to replace this component within the barrel assembly.
-

£169.99In stock
An individual front rail for the ARES L85A3, sold on its own as an external component. A practical pick if you are building up, repairing or keeping spares for an L85A3 rifle.
-

£9.99In stock
A replacement spring from ARES, listed under the reference SPRING-15 and rated M170 in the manufacturer’s naming. It suits owners of the spring version who are servicing, rebuilding or repairing their replica and need a fresh spring.
-

£9.99In stock
The ARES M160 is a mainspring made for airsoft guns that use the spring version configuration, supplied as part SPRING-14. It suits technicians swapping out a spring during a gearbox rebuild.
-

£24.90In stock
A 190mm black silencer from the ARES M16/G39 series, listed under part number SIL-004-S. Suited to players running an M16 or G39 pattern rifle who want to add this muzzle component to their setup.
-

£14.99In stock
A Type B flash hider from the ARES Amoeba Mutant range, supplied under code AM-M-FH-002. One for players finishing the front end of a custom build or swapping the muzzle part on a rifle they already run.
-

£39.00In stock
A replacement mosfet for ARES M4 X-Class rifles, sold as part of the ARES spare parts line. Choose it if you need to renew the component rather than alter how the rifle is set up.
-

£39.00In stock
A replacement MOSFET component for the ARES G36 platform, offered as a single spare part for servicing and repair work. A sensible item to have on the bench if you maintain your own AEG.
-

£154.99In stock
The SE Tactical from ARES is a 1-4×24 variable scope finished in DE/Tan and carrying the SC-012 reference. It suits airsoft players who want one optic covering close-range and longer shots.
-

£34.99In stock
The CPSB-001 from ARES is a complete cylinder set for the Amoeba AS-01 Striker. It suits players rebuilding or refreshing the internals of that rifle who are comfortable stripping the assembly down.
-

£22.99In stock
A replacement internal component from ARES, listed under part references MSR-011 and UB-195. Suitable for airsoft users carrying out maintenance who need to match the part number to their existing build.
-

£24.99In stock
This metal mount from ARES is intended for the SC-016 series scope and is identified as the SM-013. It suits airsoft players assembling or replacing the sight mounting setup for that scope family.
-

£3.99In stock
An ARES part listed under number GB-286, offered as part of the EFCS range. It suits players maintaining an EFCS-equipped build who prefer to order using the exact reference rather than a description.
-

£0.99In stock
This single replacement fastener from ARES is intended for KeyMod-type fittings and arrives on its own for workshop use. It suits players servicing their own replica who need to swap out one lost or worn fixing.
-

£19.99In stock
Replacement cylinder for the ARES L1A1 SLR, supplied as a repair part. A sensible choice for anyone rebuilding a tired rifle or renewing a damaged compression component.
-

£44.99In stock
An M-Lok bipod from the ARES x Amoeba range, model ML-BIP-002, with a stated length range of 150mm to 210mm. It is aimed at airsoft rifles with a compatible M-Lok fore-end.
-

£11.99In stock
This ARES x Amoeba mount lets you add a bipod to an M-Lok handguard. It suits airsoft rifles that need a front rest point and comes in black with the ML-ACC-009 part number.
-

£10.99In stock
This M-Lok slot accessory belongs to the ARES Octa Arms range and is the Type E variant, product code ML-ACC-005. It suits players building up an M-Lok handguard who want a part from this series.
-

£9.99In stock
A black M-Lok accessory from the ARES x Amoeba line, catalogued as Type A under code ML-ACC-001. An option for players kitting out an M-Lok handguard who want a matching part from the same range.
-

£11.99In stock
A two-piece pack of ARES 5.0 inch M-Lok rail sections in tan, moulded in ABS. Useful for adding mounting space along an M-Lok handguard, with both sections able to sit on one rifle or be shared between two.
-

£11.99In stock
A two-piece tan rail set from ARESAMOEBA for M-Lok slots, each section measuring 3.50 inches and made from ABS. It suits builds that need short rail sections for compatible accessories, with part number AM-ML-R-005-DE.
-

£10.99In stock
This two-piece rail set from ARESAMOEBA adds short M-Lok mounting sections to a handguard, moulded in ABS and finished in Tan. A practical choice for compact builds that need small accessory points without a full rail.
-

£19.99In stock
A tan M-Lok hand grip from the ARES Amoeba range, supplied under reference AM-ML-DH-020-DE. Suits shooters who want a repeatable hold point on an M-Lok handguard and the option to move it later.
-

£16.99In stock
The ARES Amoeba 45 Degree Angle Grip attaches to M-Lok handguards and sets the forward hand at an angle rather than upright. An option for players refining an M-Lok front end in tan.
-

£154.99In stock
ARES G-43 ZF-4 fixed-power optic with four-times magnification, finished in black and supplied with a case. Aimed at airsoft players who want a magnified view without a variable power ring to set.
-

£9.99In stock
A steel adjustable trigger blade from the AMOEBA STRIKER range, supplied as the Type C variant under part number AS-TG-009. A useful spare for owners servicing or rebuilding the trigger of a STRIKER rifle.
-

£9.99In stock
This steel trigger blade is the Type B adjustable component for the Amoeba by Ares STRIKER, listed under part number AS-TG-008. It suits airsoft users who need this specific external part for a STRIKER build or maintenance task.
-

£9.99In stock
A Type A adjustable trigger blade for the AMOEBA by Ares STRIKER, identified by part number AS-TG-007 and specified in steel. It is aimed at airsoft users needing this external trigger component for a STRIKER build.
-

£19.99In stock
This steel trigger set from AMOEBA is made for the STRIKER platform and carries the Type C designation. It provides an adjustable trigger option, listed under part AS-TG-006.
-

£19.99In stock
Suited to the AMOEBA STRIKER platform, this steel trigger set carries the Type B designation and part number AS-TG-005. It gives players an adjustable option when changing or replacing the trigger assembly.
-

£19.99In stock
A steel trigger set for the AMOEBA by Ares STRIKER platform, supplied in Type A form under code AS-TG-004. Aimed at players and technicians building or maintaining a STRIKER-based rifle who want an adjustable trigger unit.
-

£49.99In stock
A stainless steel spring guide from the ARES C.P.S.B. range, marked as Type D and CPSB-PT-006. It suits Striker C.P.S.B. internal work for technicians and owners, as a replacement or spare.
-

£49.99In stock
A stainless steel spring guide for the ARES Striker C.P.S.B. platform, supplied as the Type D variant with part number CPSB-PT-004. It suits servicing or assembly work where the correct internal component needs to be identified.
-

£34.99In stock
A replacement gear set from ARES for the Ares x Amoeba platform, supplied as internal gearbox parts. Aimed at players and technicians carrying out servicing, repairs or a full rebuild.
-

£44.99In stock
ARES supplies this Type A cylinder head for the Amoeba Striker C.P.S.B., identified by part number CPSB-CH-001. It is an internal replacement component aimed at technicians servicing or rebuilding the rifle.
-

£49.99In stock
A lightweight replacement piston for the Amoeba Striker C.P.S.B from ARES, made from titanium and aluminium in the Type A pattern. A sensible pick for technicians servicing or rebuilding a compatible Striker rifle.
-

£9.99In stock
A tactical pen from the ARES accessories range, catalogued as model SOU-003. A sensible item to keep in a pouch or kit bag for signing in at a site and jotting down range notes.
-

£2.34In stock
This patch displays the ARES and Amoeba M45 Series design and is marked with the PATCH-E-002 code. It suits airsoft players who want to add that branding to their existing kit.
-

£2.03In stock
Part of the ARES x Amoeba line, this patch carries ARES branding and the PATCH-E-001 code. A straightforward choice for players who like their kit to show the brand they use.
-

£1.56In stock
A tan patch from ARES carrying the ARES x Amoeba M45 X-Class marking, ordered under reference PATCH-P-003. A straightforward choice for players who want their patch selection to follow the ARES and Amoeba gear they already use.
-

£1.56In stock
A black M45 X-Class patch from the ARES and Amoeba collaboration, listed under part number PATCH-P-002. A straightforward way to add branded insignia to your kit if you run Amoeba equipment.
-

£3.99In stock
A patch accessory from ARES for airsoft players and patch collectors. It is identified by the Ares x Amoeba name and the PATCH-P-001 reference, so you can match it to the correct listing.
-

£24.99In stock
An extendable buffer tube from the ARES M45 series, presented in the mid variant with a black finish and the BT-013 part number. It is an external part suited to owners specifying components for an M45 series build.
-

£26.99In stock
An extendable buffer tube from the ARES M45 range, listed in the long version with a black finish and the BT-012 part reference. Suits M45 owners replacing or changing the rear component of their rifle.
-

£38.49In stock
This tan rear stock is a replacement component for rifles in the ARES M45 series. It suits anyone restoring a worn rifle or changing the colour of the rear end.
-

£68.99In stock
A tan, short-length M-Lok handguard from ARES for the M45 platform, CNC machined as the model designation indicates. Suits those assembling a compact M45 front end who want direct M-Lok accessory fitting.
-

£10.89In stock
Replacement trigger for the ARES M45X-S, supplied as the Type B variant under part code TG-010. Intended for owners replacing a worn trigger who want the correctly catalogued component.
-

£10.99In stock
A trigger component from ARES for the M45X-S, listed as Type A and carrying the TG-009 part code. It suits airsoft users checking a specific trigger reference for their M45X-S build.
-

£16.69In stock
A muzzle-mounted flash hider from the ARES M45X-S line, catalogued as Type E with the reference GH-032. A practical pick for anyone replacing a worn muzzle device or refreshing the front end of a build.
-

£16.69In stock
The Type D flash hider for the ARES M45X-S, listed under reference GH-031. A practical choice for anyone replacing a muzzle component or checking a part number against their rifle.
-

£15.99In stock
Replacement muzzle fitting for the ARES M45X-S, listed as the Type C variant under code GH-030. A practical choice for owners of that rifle who are renewing the front end or keeping a spare part to hand.
-

£16.99In stock
A Type B flash hider from the ARES M45X-S range, identified by the GH-029 part code. It suits M45X-S owners who need to replace or change the front-end fitting on their rifle.
-

£16.69In stock
A muzzle fitting taken from the ARES M45X-S line and offered here as the Type A version, reference GH-028. Suited to anyone replacing or specifying a muzzle part on an airsoft build.
-

£49.99In stock
This ARES slim motor grip fits M4-pattern AEGs and comes paired with a high torque slim motor in tan. It is aimed at players repairing or customising an existing rifle.
-

£19.99In stock
This M-Lok foregrip from the ARES Amoeba range allows the angle of the grip to be set rather than leaving it fixed. It is aimed at players personalising an M-Lok handguard setup.
-

£19.99In stock
An M-LOK foregrip from the ARES Amoeba line, supplied as a separate component so you can add it to a suitable handguard. Suits players who treat the front end of the rifle as something to build up and change.
-

£14.99In stock
ARES Octa Arms M-Lok Rail Cover Set in OD, part ML-RC-001-OD, provides covers for M-Lok slots on compatible airsoft rails. It suits players tidying the external setup of an M-Lok rifle.
-

£14.99In stock
A pair of M-Lok rail sections from the ARES Octa Arms range, each 5.5 inches long and shaped with a key rail profile. Useful for adding accessories to M-Lok handguards at the points that suit your setup.
-

£7.29In stock
This ARES spare is catalogued as AS01 – JM-M4x8 and belongs to the internal parts section of the range. It suits technicians and players replacing a specific component during servicing or a rebuild.
-

£1.99In stock
An internal spare component from the ARES parts range, catalogued as SC-AR-011 with the LB-131 designation. A practical option for servicing or repair work where a single referenced part is needed.
-

£1.69In stock
A spares item from the ARES parts selection, referenced LB-3 and catalogued against the M4-KM rifle. Suited to players and technicians sourcing a replacement who want the right part number confirmed before ordering.
-

£1.99In stock
Replacement ARES Parts item listed under the reference M4-KM – FC-M2.5×4. Suits players and technicians who want to confirm the part code before ordering a spare for their rifle.
-

£12.99In stock
An internal spring from ARES for the Amoeba Striker C.P.S.B. range, supplied under part code AS-SP600 with dimensions 1.8 x 11.5 x 7.5 x 190. It suits owners who need this specified spring for work on their Striker.
-

£12.99In stock
An internal upgrade spring from ARES for the Amoeba Striker C.P.S.B., carrying the AS-SP550 part reference. It suits airsoft technicians replacing the spring inside the Striker assembly, with dimensions quoted as 1.8 x 11.5 x 7.5 x 190.