A two-pack of LAYLAX Nine Ball Aero gas route seals for Tokyo Marui Hi-CAPA and P226 Type 2 magazines, with a curved internal channel matched to the nozzle. Aimed at technicians servicing gas blowback pistols.
An internal hop-up packing from LAYLAX for airsoft electric pistols and compact electric submachine guns. The soft purple compound is intended for technicians fitting a sealing upgrade in lower-power electric platforms.
The LAYLAX dual-sided magazine catch fits Tokyo Marui M4 Standard AEGs and is machined from steel and aluminium alloy. It suits left-handed players and those who switch shoulders mid-game.
The LAYLAX Nine Ball Aegis HG Optic Shield guards a micro red dot on Umarex Glock GBB pistols, fixing to the rear sight dovetail. It suits players and builders wanting polycarbonate lens protection without frame or rail parts.
A 120mm replacement inner barrel for the EMG TTI JW3 2011 Combat Master, made by LAYLAX from stainless steel with a 6.03mm bore. Suits players and technicians wanting a more consistent replacement for the factory part.
A CNC-machined aluminium alloy lower frame from LAYLAX for the Tokyo Marui Hi-Capa 5.1, with a full-length accessory rail underneath. Aimed at players reducing front-end weight or mounting a light, laser or weight block.
LAYLAX Nine Ball split slide conversion for the Tokyo Marui Hi-Capa 5.1, with a fixed front block and 20mm rails top and bottom. Suited to speedsoft players and workshop builds after quicker cycling and a steadier aim.
A LAYLAX rail-mounted front kit for the Tokyo Marui Hi-Capa 5.1 GBB that holds a muzzle device fixed ahead of the slide. Suits players running tracer units or suppressors who want the cycling action free of extra weight.
A lighter bolt carrier end from LAYLAX for the Tokyo Marui M4A1 MWS gas blowback rifle. It is aimed at players and technicians tuning cycle speed and gas use on the ZET System platform.
A 900mm x 450mm maintenance mat from LAYLAX for airsoft workshop use, with a textured, oil-resistant surface and non-slip backing. It is aimed at gunsmiths, repair centres and rental sites handling stripped rifles and small components.
A replacement set of magazine adapters for LAYLAX electronic BB loaders, intended to stand in for lost or worn parts. It suits players, workshop technicians and retailers loading magazines for several weapon types.
A polymer spare gear set for LAYLAX automatic high-capacity BB loaders, supplied as internal replacement parts. Useful for workshops and retailers servicing electronic speedloaders that show gear wear.
The LAYLAX Aluminum Tactical 20mm Rail Set brings Picatinny mounting points to Type G series AEGs. A practical pick for players fitting lights, lasers, foregrips or optics to a Type G build.
A fixed outer barrel from LAYLAX for the Tokyo Marui Hi-Capa 5.1, with an interchangeable 2-Way muzzle cap and optional 14mm CCW threading. It suits custom builders and speedsoft players tuning the platform.
Replacement magazine gas valve from LAYLAX, made for the Tokyo Marui SOCOM Mk23. The Nine Ball High Bullet Valve NEO RR lets a technician adjust release volume and suits workshop use on TM-spec NBB pistols.
A 97mm steel inner barrel with a 6.00mm bore, produced by LAYLAX for Umarex 17 Series gas blowback pistols. Suited to players and technicians fitting a tighter, more rigid barrel to a primary or backup sidearm.
A LAYLAX tight-bore steel replacement barrel for MK23 gas pistols, measuring 6.00mm internally and 133mm long. Suits players upgrading a Tokyo Marui, ASG, STTI or Y&P MK23 who want a rigid steel tube in place of brass.
Designed for Tokyo Marui Hi-Capa pistols, the LAYLAX Nine Ball HPA/M4 Magazine Adapter lets the pistol run on external air and feed from M4 AEG magazines. It suits speedsoft players and technicians building consistent Hi-Capa setups.
A LAYLAX inner barrel for AEGs, measuring 300mm with a 6.03mm bore and the Type W wide hop window, machined in stainless steel. Aimed at players and technicians building flat-hop or R-hop setups who want more consistent shot-to-shot behaviour.
The LAYLAX Prometheus tappet plate is a replacement internal part for version 2 electric gearboxes, moulded in POM. It suits technicians and players rebuilding a gearbox or servicing a frequently used replica.
An internal piston head for Tokyo Marui recoil-shock New Ver.2 gearboxes, made by LAYLAX in Japan from polyoxymethylene. Suited to workshop builds and servicing where consistent cylinder sealing and a free-turning mainspring are wanted.
A LAYLAX replacement magazine output valve for Tokyo Marui M9A1, M92F and Glock gas pistols, machined from metal alloy with a purple anodised finish. It allows the gas release to be adjusted for different temperatures and build setups.
An internal precision barrel for M4A1 MWS AEG platforms, supplied by LAYLAX in a 250mm length with a 6.03mm bore. It is intended for technicians and players carrying out a planned accuracy upgrade on a compact build.
A LAYLAX hop-up arm for the Tokyo Marui M4A1 MWS gas blowback platform, machined from a single piece of high-tensile aluminium. Suited to airsoft technicians and workshops tuning MWS gas systems to run heavier BB weights.
LAYLAX offers this three-piece set of replacement charging valves for gas magazines, each machined from metal alloy with an internal seal intended to limit gas escaping during filling. Made for servicing GBB replicas from TM, VFC, WE and KSC.
An MS90-rated spring from LAYLAX with a variable-pitch coil for AEG gearboxes. It is intended for indoor CQB sites, low-power builds and technicians servicing guns under strict field limits.
This LAYLAX Prometheus flat hop bucking has a soft blue compound and a smooth straight inner casing for AEGs running a flat hop tensioner nub. It suits accuracy builds in colder weather or lower velocity setups.
An MS120 upgrade spring from LAYLAX with a variable-pitch coil and Emerald coating for quick identification. It suits technicians servicing gearboxes who want a defined velocity increase.
This LAYLAX packer replaces the gas route seal in Tokyo Marui Hi-Capa and P226 magazines, guiding gas into the loading nozzle through a curved channel. A practical choice for players tuning a gas pistol for steadier cycling.
A variable-pitch AEG upgrade spring from LAYLAX, rated MS110 and colour-coded Aqua for easy bench sorting. It suits airsoft armourers and shops servicing modified gearboxes.
The ACM Ni-MH stick pack is rated at 8.4v with a stated 1100mAh capacity and a Mini-Tamiya plug. It suits replicas wired for Mini-Tamiya connectors that have room for a slim stick battery.
A spare Mosfet and ETU board for CYMA Platinum and EMG Daniel Defense CM.1050DL BK rifles. It suits technicians repairing Version 2 rear-wired gearboxes or servicing Eshooter-equipped platforms.
A replacement MOSFET component intended for the Cyma Platinum Swat SMG5 AEG, catalogued under the CM041L designation. SPARE supplies it as an internal part for owners carrying out their own repairs.
This EMG muzzle cap fits SAI GRY GEN2 and compatible CGS rifles without covering the handguard. Green tracer BBs are charged by internal UV LEDs, while front LEDs produce an orange flash per shot.
A single spring for the SIG Sauer MPX-K platform, catalogued as S-R-24-A01 and manufactured by King Arms. Suited to airsofters carrying out their own servicing and repairs who need the correct internal part on hand.
A replacement selector plate for the SIG MPX-K platform, listed under reference M4-32-07-A01. It suits technicians carrying out a repair or rebuild where the original plate has to be renewed.
A gold-finished metal alloy baseplate for M4 and AR-15 style AEG magazines from DOUBLE, with an extended profile that adds grip area at the magazine base. Suits players wanting to change the look and handling of their magazines.
ITP supplies this bullpup conversion set for the Saiga12K, with a 6061 aluminium body shaped to echo the OTs-14 Groza. It arrives as a full kit, so the fittings needed for the build come in the box.
An assembled ARES gearbox unit for M4-pattern rifles wired to the rear, supplied with a Deans connector. It suits anyone replacing the whole internal assembly in an Amoeba or M4-E build.
A spare screw from the UMAREX spares range, intended for VFC-produced airsoft replicas. Useful when a fixing has gone missing or been damaged during a strip-down or repair.
A replacement sear for VSR-10 and DOUBLE 201 series bolt-action sniper rifles, forming part of the trigger mechanism. Suited to owners rebuilding a worn trigger assembly or servicing a rifle that no longer holds the piston securely.
A semi-only internal component from the CYMA CGS Series parts range. It is aimed at CGS Series owners who are carrying out maintenance or assembling a semi-only setup.
The number 7 grip component listed for the WE APACHE SD3, supplied in black. It suits owners replacing existing grips or keeping a spare for servicing.
This DOUBLE electronic trigger unit with MOSFET circuitry is made for V2 gearbox builds, forming part of the firing-control electrics inside the shell. Suited to technicians and experienced players carrying out internal work on a Kestrel-series build.
A replacement electrical component for airsoft replicas, branded DOUBLE and designated FALCON 3.0 within the Double Eagle Series. Aimed at hobbyists who handle their own internal fitting work and want the right part for their build.
A MOSFET component from WELL, listed under the WE05 model name in our mosfet category. Suited to airsoft players building or maintaining AEG electrics who want to confirm fitment against their own setup before buying.
A MOSFET unit for airsoft electric guns, offered by WELL under the WE10 reference. A sensible pick for players who already handle their own wiring and gearbox work.
A mosfet unit listed by WELL for the WE01 and WE03 AEG models. A practical choice for servicing or repair work on those rifles, provided your gun carries one of those model codes.
Replacement mosfet for AEG rifles, produced by WELL and catalogued under the WE06 code. Suits players working on the wiring inside an electric rifle rather than the gearbox internals.
Slim spacer shims for airsoft gearbox internals, supplied by ARES for setting gear end float and lining up the mesh. Aimed at technicians rebuilding a gear train who need small spacing changes.
A small internal component for ARES gearboxes, listed under the GB-44 part reference. Suits those replacing a worn bush during a gearbox rebuild or service.
Replacement gas magazine release valves for WELL WE09-1GM magazines, aimed at airsofters servicing their own gas magazines. A spare part to keep on the bench for magazine repairs.
Replacement gas magazine seals for the WELL WE09-1GM, intended to replace worn or damaged parts. A practical item for owners carrying out maintenance on their WE09-1GM magazine.
Spare release valves intended for the WE06-GM gas magazine, supplied under the WELL brand. A suitable pick for players servicing or repairing an existing WE06-GM magazine.
Spare gas fill valves for the WELL WE06-GM magazine, letting you replace a valve that no longer holds gas. A sensible part to keep in your spares box if you use this magazine regularly.
A replacement seal set for the WELL WE06-GM gas magazine, supplied as an internal spare. Suits players refurbishing a magazine that no longer holds gas as it should.
This adapter from ITP allows a WE/AW drum magazine to be paired with a VFC M4 variant. It suits players who already own a drum magazine and want to use it on a VFC-pattern rifle.
An ITP magazine accessory that lets a WE/AW drum magazine connect to MWS-pattern rifles. Suited to airsoft players running an MWS variant who want to use a drum magazine setup.
When you already run a WE/AW drum magazine, this ITP connector lets you mount it on a GHK platform instead. It is a single adapter piece, and no magazine is included.
An internal spare component carrying the part number FSG0521#11, sold by MAD for the Mad Max range. It is aimed at airsofters and technicians replacing a worn or damaged piece during a rebuild.
This gear set is a spare internal part for replicas in the CYMA CM030 line, for swapping out the gears during a gearbox rebuild. It suits players who service their own equipment or leave the work to a technician.
A stainless steel body and a 1/8 BSP thread are combined in this ACM coupler socket. It suits Krale pumps and comparable gear that uses this socket format.
A GATE mosfet supplied as the ASTER V3 SE Expert, order code AST3S-EM. Aimed at airsoft technicians and players already specifying ASTER components for a build who want the exact variant identified by its code.
This standalone GATE mosfet module belongs to the TITAN family and is listed by the code TTN3-EM. It is aimed at players already familiar with TITAN electronics who need the Expert Module variant for a current build.
Air line for the PULSAR S from GATE, listed at 6mm and identified by the AH6 reference. A practical spare to hold if you are building or maintaining an HPA setup around this system.
Replacement O-rings for the solenoid valve in the GATE PULSAR, sold as a pack of four under part code PS-SVO. A practical spare for anyone servicing their own PULSAR unit at home.
An engine-side quick-disconnect fitting from GATE in 6 mm, made to the US Standard specification. A component for those building, servicing or reconfiguring an HPA setup who need to match an existing connector.
A GATE replacement nozzle listed for SR25 rifles, quoted at 23.80–24.00 mm. It is aimed at players servicing or building an HPA-powered SR25 who need to confirm the nozzle dimension matches their setup.
A GATE nozzle for the PULSAR S HPA engine, sized 19.40–19.60 mm and intended for AK47 builds. Suits players assembling or maintaining an HPA-powered AK47 who need this particular fitment.
A replacement body section for the GATE PULSAR S HPA engine, sold as an individual spare under reference PS-RP. It suits existing PULSAR S owners who are repairing or servicing their engine themselves.
This 24.00 mm nozzle is produced by GATE for the PULSAR H HPA engine and carries the SR25 designation. It is a spare part for players servicing an SR25-based HPA build (N-PH-2450).
A 21.40 mm nozzle from GATE for the PULSAR H system, intended for M4/M16 platforms and identified by N-PH-2140. It is aimed at those running a PULSAR H HPA setup who need this nozzle size.
31 users are watching this item:
Secutor Velties Ferrum S-IX (Tan) Spring Powered Shotgun
William Foster from London purchased
Webley MKVI Leather Holster
17 minutes ago
Bailey Fitzgerald says:
Ordered my first GBBR, DE Noveske. the team was very helpful over the phone and made sure i got it before my weekend skirmish. much better service and reliability than the cursed Patrol Base!